The YAGEO MFR-12DTD52-680R is a metal film through-hole resistor delivering 680 ohms resistance with ±0.5% tolerance in an axial lead configuration. This component operates at 0.167W power dissipation (1/6W rating) and maintains a ±25ppm/°C temperature coefficient across its -55°C to 155°C operating range. The resistor measures 1.90mm diameter by 3.40mm length with standard axial lead terminations, supplied in tape and box packaging with RoHS3 compliance.
Metal film construction provides the MFR series with superior noise characteristics and long-term stability compared to carbon composition alternatives. The 0.5% tolerance specification positions this resistor for precision analog circuits, sensor signal conditioning, and voltage reference applications where standard 1% or 5% tolerance components introduce excessive error margins. The tight tolerance reduces the need for hand-selection or trimming in production environments, particularly beneficial in multi-stage amplifier gain networks and precision voltage dividers where cumulative error must be minimized.
The 25ppm/°C temperature coefficient ensures predictable resistance drift over temperature extremes, maintaining circuit accuracy in automotive electronics, industrial control systems, and outdoor instrumentation exposed to wide ambient temperature swings. This stability becomes particularly relevant in current sensing applications and precision timing circuits where temperature-induced resistance variation directly impacts measurement accuracy.
At 1/6W power rating, the MFR-12DTD52-680R suits general-purpose signal processing, LED current limiting, and logic level pull-up/pull-down applications. The axial through-hole form factor accommodates hand assembly, prototyping, and automated insertion equipment while providing mechanical robustness for applications subject to vibration or mechanical stress where surface mount components may prove less reliable.
The 680 ohm value finds common use in TTL and CMOS logic interfacing, RS-232/RS-485 line termination, and audio frequency filtering networks. In LED driver circuits, this resistance value paired with standard supply voltages produces appropriate forward currents for indicator applications. The resistor's operational temperature range covers commercial, industrial, and partial military temperature grades without derating requirements in most standard electronics assemblies.
YAGEO's active product status and available inventory support ongoing production commitments and service lifecycle requirements. The component carries EAR99 export classification with REACH unaffected status, simplifying international procurement and regulatory compliance documentation for OEM manufacturers and contract assembly operations.
MFR-12DTD52-680R (1)
Understanding the Need for MFR-12DTD52-680R Alternatives
When sourcing components for precision analog circuits, signal conditioning stages, or voltage divider networks requiring tight tolerance control, engineers often encounter scenarios where the exact specified part becomes unavailable due to supply chain constraints, extended lead times, or cost optimization requirements. The YAGEO MFR-12DTD52-680R, a 680-ohm ±0.5% metal film through-hole resistor with 1/6W power rating, represents a precision component commonly used in applications demanding low temperature coefficient performance and stable resistance characteristics across the -55°C to 155°C operating range.
Direct alternatives for this component include Vishay Dale CMF55680RFKEB, KOA Speer MF1/6SRD52680R, Stackpole Electronics RNMF14DTC680R, and Panasonic
ERO-S2PHF6800
. Each option provides comparable electrical specifications with variations in tolerance grades, physical dimensions, and thermal performance characteristics that influence their suitability for specific design implementations.
ERO-S2PHF6800
Panasonic Electronic Components
RES 680 OHM 1% 1/4W AXIAL
316623
Baseline Specifications and Engineering Context
The MFR-12DTD52-680R exhibits several defining characteristics that establish the selection criteria for equivalent parts. The 0.5% tolerance specification positions this component in the precision resistor category, typically required in reference voltage circuits, precision current sensing applications, and feedback networks where component drift directly affects circuit accuracy. The ±25ppm/°C temperature coefficient ensures resistance stability of approximately 1.7% across the full 210°C operating temperature span, a parameter that becomes particularly relevant in designs subject to environmental temperature variations or self-heating effects.
The 1/6W (0.167W) power rating, while modest, defines thermal management requirements and influences the maximum allowable current through the device. At the nominal 680-ohm resistance value, this power rating permits continuous operation at approximately 15.6mA, though practical circuit design typically applies a 50-70% derating factor to ensure long-term reliability. The axial metal film construction provides inherent advantages in noise performance compared to carbon composition types and maintains superior stability under load conditions relative to carbon film alternatives.
Physical dimensions of 1.90mm diameter by 3.40mm body length, combined with the axial lead configuration, dictate PCB footprint requirements and establish mechanical compatibility boundaries. These dimensional constraints become particularly relevant in designs with high component density or automated assembly processes where lead spacing and component height restrictions apply.
Vishay Dale CMF55680RFKEB as Primary Cross-Reference
The Vishay CMF55680RFKEB represents a direct functional equivalent offering identical 680-ohm resistance with matching ±0.5% tolerance and 1/6W power rating. This component maintains the same ±25ppm/°C temperature coefficient specification, ensuring equivalent thermal stability performance in temperature-sensitive applications. The metal film construction methodology aligns with the original YAGEO part, providing comparable voltage coefficient and noise characteristics essential for low-level signal processing stages.
Physical dimensions measure 0.098" diameter by 0.157" length (2.50mm x 4.00mm), representing approximately 30% larger body volume compared to the MFR-12DTD52-680R. This dimensional variance requires verification of PCB footprint compatibility, particularly in designs with constrained component spacing or standardized lead pitch requirements typically set at 0.400" (10.16mm) intervals. The increased body size does provide marginally improved thermal dissipation characteristics, though both components operate well within safe thermal limits under rated power conditions.
The CMF55 series demonstrates proven reliability in military and aerospace applications, with extensive qualification data supporting operation in harsh environmental conditions. Voltage coefficient specifications remain below 0.1ppm/V, ensuring resistance stability under varying applied voltage conditions—a consideration in high-impedance circuit topologies or precision measurement applications where signal voltage varies significantly during operation.
KOA Speer MF1/6SRD52680R Analysis
KOA Speer's MF1/6SRD52680R offers identical nominal specifications including 680-ohm resistance, ±0.5% tolerance, 1/6W power rating, and ±25ppm/°C temperature coefficient. The component maintains axial metal film construction with lead-free terminations meeting RoHS compliance requirements. Operating temperature range spans -55°C to 155°C, matching the baseline specification and ensuring functional equivalence across the full environmental envelope.
Dimensional characteristics measure 0.079" diameter by 0.138" length (2.00mm x 3.50mm), falling within 5% of the original YAGEO dimensions and representing the closest physical match among alternatives discussed. This minimal geometric variance simplifies direct substitution in existing PCB layouts without requiring footprint modifications or assembly process adjustments. Lead diameter and spacing conform to industry-standard axial resistor configurations, maintaining compatibility with automated insertion equipment and wave soldering profiles.
The MF1/6 series exhibits voltage coefficient specifications comparable to other precision metal film types, with measured values typically below 0.05ppm/V in the 680-ohm resistance decade. Load life stability data indicates resistance drift below 0.25% after 1000-hour operation at rated power and 70°C ambient temperature, supporting applications requiring long-term calibration retention. Current noise specifications remain below -30dB per decade, appropriate for audio frequency applications and precision DC measurement circuits.
Stackpole Electronics RNMF14DTC680R Evaluation
The Stackpole RNMF14DTC680R provides 680-ohm resistance at ±0.5% tolerance with 1/4W (0.25W) power rating, representing a 50% increase in power handling capacity compared to the baseline 1/6W specification. This enhanced power rating extends thermal derating margins and permits operation at higher current levels in applications where the original 1/6W rating approached thermal limits. The ±25ppm/°C temperature coefficient matches the MFR-12DTD52-680R specification, maintaining equivalent thermal stability characteristics.
Physical dimensions measure 0.092" diameter by 0.142" length (2.34mm x 3.60mm), representing approximately 20% larger body volume than the YAGEO part. The increased size correlates directly with the higher power rating and improved thermal dissipation characteristics. Standard lead spacing of 0.400" (10.16mm) maintains compatibility with typical through-hole PCB layouts, though component height and body diameter require verification in assemblies with vertical clearance constraints or adjacent component interference concerns.
The 1/4W power rating permits continuous operation at approximately 19.2mA through the 680-ohm resistance value before reaching rated dissipation limits. When applying standard 50% derating practices for commercial temperature range operation, the effective operational current increases to approximately 13.6mA compared to 11.0mA for the 1/6W baseline component. This difference becomes relevant in current sensing applications, bias networks, or voltage divider configurations where resistor self-heating influences circuit accuracy.
Panasonic ERO-S2PHF6800 Characteristics
Panasonic's
ERO-S2PHF6800
offers 680-ohm resistance with ±1% tolerance, representing a tolerance grade relaxation compared to the baseline ±0.5% specification. The component maintains 1/4W power rating with ±100ppm/°C temperature coefficient, indicating twice the thermal sensitivity of the MFR-12DTD52-680R specification. These parameter variations position this alternative as suitable for cost-sensitive applications where the tighter tolerance and lower temperature coefficient provide marginal functional benefit.
ERO-S2PHF6800
Panasonic Electronic Components
RES 680 OHM 1% 1/4W AXIAL
316623
The metal film construction maintains low voltage coefficient and noise characteristics comparable to precision-grade components, though the ±1% tolerance specification directly impacts initial accuracy in ratio-dependent circuit topologies such as instrumented amplifier gain networks or precision voltage references. In applications where initial calibration or trimming procedures accommodate the wider tolerance window, this component offers functional equivalence at reduced procurement cost.
Physical dimensions of 0.098" diameter by 0.177" length (2.50mm x 4.50mm) represent the largest body size among alternatives discussed, correlating with the 1/4W power rating and providing enhanced thermal dissipation capability. The increased length requires verification of lead spacing compatibility and may necessitate PCB layout modifications in designs optimized for smaller axial resistor packages. Operating temperature range extends from -55°C to 155°C, maintaining environmental qualification equivalence with the baseline specification.
Comparison Summary
Direct comparison across key specification parameters reveals distinct differentiation points among alternatives:
- Tolerance specifications span from ±0.5% (Vishay CMF55680RFKEB, KOA MF1/6SRD52680R, Stackpole RNMF14DTC680R) to ±1% (Panasonic
ERO-S2PHF6800), with the tighter tolerance options maintaining direct equivalence to the baseline MFR-12DTD52-680R specification. Applications requiring matched resistor pairs or precision ratio accuracy benefit from the ±0.5% tolerance grade.
ERO-S2PHF6800
Panasonic Electronic Components
RES 680 OHM 1% 1/4W AXIAL
316623
- Power ratings divide into 1/6W (Vishay CMF55680RFKEB, KOA MF1/6SRD52680R) and 1/4W (Stackpole RNMF14DTC680R, Panasonic
ERO-S2PHF6800) categories. The higher power rating options provide extended thermal derating margins and support higher operating currents in power-sensitive applications.
ERO-S2PHF6800
Panasonic Electronic Components
RES 680 OHM 1% 1/4W AXIAL
316623
- Temperature coefficient specifications separate into ±25ppm/°C (Vishay CMF55680RFKEB, KOA MF1/6SRD52680R, Stackpole RNMF14DTC680R) and ±100ppm/°C (Panasonic
ERO-S2PHF6800). The lower temperature coefficient components maintain superior stability across temperature variations, particularly relevant in precision measurement applications or circuits operating across wide environmental temperature ranges.
ERO-S2PHF6800
Panasonic Electronic Components
RES 680 OHM 1% 1/4W AXIAL
316623
- Physical dimensions range from 1.90mm x 3.40mm (YAGEO MFR-12DTD52-680R baseline) to 2.50mm x 4.50mm (Panasonic
ERO-S2PHF6800), with the KOA MF1/6SRD52680R at 2.00mm x 3.50mm providing the closest dimensional match. Footprint compatibility considerations become relevant in high-density assemblies or retrofit applications using existing PCB layouts.
ERO-S2PHF6800
Panasonic Electronic Components
RES 680 OHM 1% 1/4W AXIAL
316623
Practical Validation Methods Using KOA Speer MF1/6SRD52680R
When substituting the KOA MF1/6SRD52680R into an existing design originally specifying the MFR-12DTD52-680R, several validation steps confirm functional equivalence and identify potential performance variations. This component selection represents the closest dimensional match while maintaining identical electrical specifications, minimizing mechanical integration risks while preserving electrical performance characteristics.
Resistance measurement under nominal conditions using a calibrated four-wire ohmmeter verifies the component falls within the specified ±0.5% tolerance band, confirming the actual resistance value lies between 676.6 and 683.4 ohms at 25°C. Temperature coefficient validation involves resistance measurement at minimum and maximum operating temperatures (-55°C and 155°C), with the expected resistance variation calculated as ±0.525% across the 210°C span. Measured resistance values should remain within the combined tolerance envelope of initial accuracy plus temperature-induced drift.
Thermal performance validation under rated power conditions involves monitoring component body temperature during sustained operation at 0.167W dissipation. With ambient temperature held at 25°C, expected body temperature rise reaches approximately 40-50°C for typical axial resistor thermal resistance characteristics, maintaining operation well below the 155°C maximum rating. Thermal imaging or thermocouple measurement confirms temperature rise remains consistent with datasheet specifications and comparable to the original YAGEO component.
Voltage coefficient verification applies progressively increasing DC voltage across the resistor while monitoring resistance value with a precision measurement system. Measured resistance should remain stable within ±0.1% across the applied voltage range from zero to the maximum circuit operating voltage, typically limited by power dissipation constraints rather than voltage coefficient effects at the 680-ohm resistance value. This validation becomes particularly relevant in high-impedance circuit topologies where applied voltage varies significantly during operation.
Noise performance assessment in low-level signal applications involves measuring current noise spectral density across the audio frequency band using a low-noise preamplifier and spectrum analyzer. Metal film resistors typically exhibit noise floors below -30dB per decade, significantly lower than carbon composition types. Measured noise characteristics should align with theoretical thermal noise expectations based on the Johnson-Nyquist relationship, with minimal excess noise contribution from the resistor element itself.
Decision Framework for Replacement Selection
The selection process for MFR-12DTD52-680R alternatives follows a structured evaluation hierarchy based on specific application requirements and constraints. For applications demanding maximum electrical specification equivalence with minimal design risk, the KOA Speer MF1/6SRD52680R provides the closest overall match through identical electrical parameters combined with near-matching physical dimensions, facilitating direct substitution without PCB layout modifications or assembly process adjustments.
Designs requiring enhanced thermal margin or operation at elevated power levels benefit from the Stackpole RNMF14DTC680R with its 1/4W power rating, providing 50% additional power handling capacity while maintaining the ±0.5% tolerance and ±25ppm/°C temperature coefficient specifications. This selection proves advantageous in current sensing applications or bias networks where resistor self-heating influences circuit accuracy.
Applications where initial tolerance relaxation to ±1% remains acceptable, particularly those incorporating calibration procedures or software compensation for component variations, may consider the Panasonic
ERO-S2PHF6800
as a cost-optimized alternative. The ±100ppm/°C temperature coefficient necessitates evaluation of temperature-dependent performance requirements, with this component best suited to controlled temperature environments or applications where the fourfold increase in thermal sensitivity remains within acceptable performance boundaries.
ERO-S2PHF6800
Panasonic Electronic Components
RES 680 OHM 1% 1/4W AXIAL
316623
The Vishay Dale CMF55680RFKEB serves applications requiring proven reliability qualification data supporting military or aerospace environmental specifications, offering extensive characterization across extended temperature cycling, humidity exposure, and mechanical stress conditions. The larger body size correlates with robust construction suitable for harsh environment deployment while maintaining electrical specification equivalence.




