The Winbond
W9812G6KH-5I
TR is a synchronous DRAM component delivering 128Mbit storage capacity in an organized 8M × 16 architecture, engineered for embedded systems and computing applications requiring moderate-density volatile memory with straightforward LVTTL interface compatibility. This SDRAM operates at a 200 MHz clock frequency with a 4.5 ns access time, positioning it within the CL-3 latency class suitable for cost-sensitive designs where performance requirements align with established SDRAM timing standards rather than demanding cutting-edge DDR protocols.
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
Packaged in a 54-pin TSOP II form factor with a 10.16mm body width, the device supports surface-mount assembly on standard PCB layouts commonly encountered in industrial controllers, communication modules, and consumer electronics. The supply voltage range of 3V to 3.6V accommodates legacy 3.3V logic families and mixed-voltage system architectures, simplifying integration into existing hardware platforms without level-shifting circuitry. The LVTTL-compatible interface ensures direct connectivity with microcontrollers, FPGAs, and application processors operating within the same voltage domain, reducing component count and design complexity in space-constrained applications.
The -40°C to 85°C operating temperature range covers industrial-grade environmental conditions, making the
W9812G6KH-5I
applicable to outdoor equipment, automotive auxiliary systems, and factory automation hardware exposed to thermal cycling. Tape and reel packaging supports automated pick-and-place workflows in medium-to-high-volume production, while the Moisture Sensitivity Level 3 classification permits up to 168 hours of floor life post-reflow under controlled ambient conditions, providing reasonable handling margin during assembly operations.
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
With an organized density of 8 million words by 16 bits, this memory configuration naturally aligns with systems requiring straightforward data path widths without byte-lane multiplexing. The synchronous architecture delivers deterministic burst access patterns when coupled with appropriate SDRAM controllers, supporting sequential read and write operations common in framebuffer applications, data logging, and packet buffering tasks. The device complies with RoHS3 directives and carries an EAR99 export classification, simplifying regulatory compliance for multinational deployment.
Winbond's W9812G6 family represents a stable synchronous DRAM solution for applications transitioning from asynchronous memory technologies or seeking cost-optimized alternatives to higher-bandwidth DDR components where system-level timing budgets permit classic SDRAM specifications. The 200 MHz operational ceiling provides adequate throughput for real-time control loops, user interface rendering, and moderate data acquisition rates without incurring the complexity of dual-data-rate clocking or on-die termination networks.
Replacement Challenges Around Winbond Electronics W9812G6KH-5I TR 128Mbit SDRAM
Replacing the Winbond Electronics
W9812G6KH-5I
TR is not just a matter of matching “128Mbit SDRAM” in a catalog. This device is a 3.3 V, LVTTL, 8M x 16 SDRAM supplied in a 54-TSOP II package, rated for 200 MHz operation and an industrial temperature range of -40°C to 85°C. A suitable substitute must align with the memory controller’s timing setup, PCB footprint, signal voltage levels, refresh behavior, and supply constraints.
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
Common replacement candidates for
W9812G6KH-5I
TR include:
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
- Winbond Electronics
W9812G6KH-6I
W9812G6KH-6I
Winbond Electronics
IC DRAM 128MBIT PAR 54TSOP II
6658
- ISSI
IS42S16800F-5TLI
IS42S16800F-5TLI
ISSI, Integrated Silicon Solution Inc
IC DRAM 128MBIT PAR 54TSOP II
9943
- ESMT
M12L128168A-5TG2I
M12L128168A
ESMT
1021
8080
- Alliance Memory
AS4C8M16SA-6TIN
AS4C8M16SA-6TIN
Alliance Memory, Inc.
IC DRAM 128MBIT PAR 54TSOP II
12214
- Micron
MT48LC8M16A2P-6AIT
MT48LC8M16A2P-6A
Micron
MT48LC8M16A2P-6A MICRON TSOP
5058
- Samsung
K4S281632K-UC75
K4S281632K-UC75
SMASUNG
K4S281632K-UC75 SAMSUNG TSOP54
25997
These parts are often considered when sourcing 128Mbit SDRAM 8M x 16 54-TSOP II replacements, but they are not always drop-in equivalents in every design. The main engineering checks are clock frequency margin, CAS latency configuration, package and pin compatibility, industrial-temperature availability, lifecycle status, and whether the memory controller can tolerate timing differences.
What Defines the Winbond Electronics W9812G6KH-5I TR SDRAM Baseline
The Winbond Electronics
W9812G6KH-5I
TR is a volatile SDRAM memory IC with a 128Mbit density organized as 8M x 16. It uses an LVTTL interface and operates from a 3.0 V to 3.6 V supply, making it suitable for legacy and embedded 3.3 V memory buses. Its 200 MHz clock frequency and 4.5 ns access time place it among faster 128Mbit SDRAM options in the 54-TSOP II form factor.
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
| Parameter | Winbond Electronics W9812G6KH-5I TR Baseline | Replacement Impact |
|---|---|---|
| Memory type | SDRAM, volatile DRAM | Candidate parts must support standard SDRAM command, refresh, and timing behavior compatible with the controller |
| Density and organization | 128Mbit, 8M x 16 | A replacement should normally keep the same x16 data width and address mapping to avoid firmware or hardware changes |
| Interface | LVTTL | Electrical signaling must remain compatible with 3.3 V LVTTL memory buses |
| Supply voltage | 3.0 V to 3.6 V | Substitutes must support 3.3 V operation; low-voltage SDRAM or DDR parts are not compatible |
| Clock frequency | 200 MHz | Slower alternatives may work only if the system clock and timing registers can be relaxed |
| Access time | 4.5 ns | Affects read timing margin, especially in designs already operating near the original speed grade |
| Operating temperature | -40°C to 85°C | Industrial-grade replacements are preferred for outdoor, automotive-adjacent, industrial control, and long-life embedded systems |
| Package | 54-TSOP II, 0.400 inch / 10.16 mm width | Mechanical and pinout compatibility should be verified against the PCB land pattern |
| Mounting | Surface mount, Tape & Reel | Relevant for automated assembly and production continuity |
| Compliance | RoHS3, REACH unaffected, MSL 3 | Replacement handling and compliance documentation should match production requirements |
The key product features of the
W9812G6KH-5I
TR are its 8M x 16 organization, 3.3 V LVTTL bus compatibility, 200 MHz SDRAM performance, industrial temperature range, and standard 54-TSOP II packaging. These characteristics commonly support embedded processors, networking equipment, industrial HMI panels, test instruments, communication modules, consumer electronics platforms, and legacy control boards.
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
For replacement evaluation, the package and organization usually determine whether the part can physically fit and connect correctly, while speed grade and timing determine whether the system will boot reliably across voltage and temperature corners. A part with the same density and package but lower frequency rating may still be usable in a 100 MHz or 133 MHz design, but it is not a direct substitute for a design actually using the 200 MHz capability of the Winbond device.
Candidate 128Mbit SDRAM Alternatives to W9812G6KH-5I TR
The following table compares practical replacement candidates for the Winbond Electronics
W9812G6KH-5I
TR. Final approval should be based on the latest manufacturer datasheet, timing register configuration, PCB pinout comparison, and production qualification testing.
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Winbond Electronics |
| 128Mbit SDRAM, 8M x 16, 3.3 V LVTTL, 54-TSOP II, industrial temperature, lower speed grade than -5I | Same product family, same density and organization, same general package family | Embedded control boards, industrial displays, legacy 3.3 V SDRAM systems | Closest family-level alternative when the design does not require full 200 MHz operation | Slower speed grade; timing parameters must be checked against the system clock | Best candidate when maintaining Winbond family consistency matters and the controller can run with relaxed timing |
| ISSI |
| 128Mbit SDRAM, 8M x 16, 3.3 V, 54-TSOP II, industrial temperature, 200 MHz class speed grade | Long-life embedded memory option, broad industrial usage, x16 SDRAM organization | Industrial controllers, networking hardware, communication equipment, embedded Linux platforms | Matches the main density, data width, voltage class, package style, and speed class of
| Timing values, refresh current, mode register behavior, and pinout should be compared in detail | Strong replacement candidate for designs needing a 200 MHz 128Mbit SDRAM equivalent |
| ESMT |
M12L128168A
ESMT
1021
8080
| 128Mbit SDRAM, 8M x 16, 3.3 V, 54-TSOP II, industrial temperature, 200 MHz class option | Suitable for embedded and industrial systems requiring x16 SDRAM | HMI equipment, POS terminals, consumer-industrial electronics, control modules | Similar SDRAM architecture, density, interface voltage, package type, and speed class | Availability and exact ordering suffix should be verified; AC timing and current consumption may differ | Useful alternative where 200 MHz operation and industrial temperature are required |
| Alliance Memory |
| 128Mbit SDRAM, 8M x 16, 3.3 V, 54-TSOP II, industrial temperature, commonly used in legacy SDRAM replacement programs | Focused on long-term support for legacy memory densities | Industrial equipment repair, long-life embedded platforms, replacement of discontinued SDRAM | Same memory density and bus width with compatible 3.3 V SDRAM use cases | Typically a slower speed grade than
| Suitable for systems operating at 100 MHz, 133 MHz, or otherwise within the device timing limits |
| Micron |
MT48LC8M16A2P-6A
Micron
MT48LC8M16A2P-6A MICRON TSOP
5058
| 128Mbit SDRAM, 8M x 16, 3.3 V, 54-TSOP II, industrial temperature version, PC133-class performance | Widely documented SDRAM architecture with strong historical design adoption | Legacy embedded processors, telecom boards, instrumentation, industrial computing | Electrical class, organization, and package are close to the original SDRAM requirements | Not a 200 MHz equivalent; lifecycle and availability may vary by suffix and channel | Good option for legacy designs where controller timing is configured for PC133-class SDRAM |
| Samsung |
K4S281632K-UC75
SMASUNG
K4S281632K-UC75 SAMSUNG TSOP54
25997
| 128Mbit SDRAM, x16 organization, 3.3 V SDRAM family, TSOP II package class, commercial/legacy availability varies | Established legacy SDRAM family used in many older embedded designs | Consumer electronics, set-top boxes, legacy computing modules, older communication products | Same general SDRAM density and x16 bus concept can fit some existing controller designs | Temperature grade, lifecycle status, speed grade, and sourcing consistency may be limiting factors | Consider mainly for repair, legacy board support, or controlled substitutions after full qualification |
Among these candidates, ISSI
IS42S16800F-5TLI
and ESMT
IS42S16800F-5TLI
ISSI, Integrated Silicon Solution Inc
IC DRAM 128MBIT PAR 54TSOP II
9943
M12L128168A
-5TG2I are usually the most relevant when the goal is to preserve the 200 MHz-class performance of the Winbond Electronics
M12L128168A
ESMT
1021
8080
W9812G6KH-5I
TR. Winbond
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
W9812G6KH-6I
is attractive because it stays within the same family, but its slower speed grade changes the timing margin. Alliance Memory
W9812G6KH-6I
Winbond Electronics
IC DRAM 128MBIT PAR 54TSOP II
6658
AS4C8M16SA-6TIN
and Micron
AS4C8M16SA-6TIN
Alliance Memory, Inc.
IC DRAM 128MBIT PAR 54TSOP II
12214
MT48LC8M16A2P-6A
IT are often considered for long-life or legacy systems, but they should be evaluated as timing-dependent alternatives rather than automatic equivalents. Samsung
MT48LC8M16A2P-6A
Micron
MT48LC8M16A2P-6A MICRON TSOP
5058
K4S281632K-UC75
can be useful in legacy maintenance scenarios, although lifecycle and temperature-grade constraints may influence sourcing decisions.
K4S281632K-UC75
SMASUNG
K4S281632K-UC75 SAMSUNG TSOP54
25997
Engineering Trade-Offs When Comparing W9812G6KH-5I TR Replacement Options
Selecting a
W9812G6KH-5I
TR equivalent part number requires more than comparing density and package. A substitute must match the way the memory controller initializes SDRAM, including CAS latency, burst length, refresh timing, row/column addressing, and setup/hold margins. Board-level effects such as trace length, loading, termination strategy, and supply noise can also affect whether a replacement passes qualification.
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
| Replacement Option | Electrical Compatibility | Mechanical Compatibility | Performance Difference | Reliability and Lifecycle Considerations | Package and Supply Availability | Cost Considerations | Suitable Application Scenarios | Advantages | Limitations |
|---|---|---|---|---|---|---|---|---|---|
| Winbond W9812G6KH-6I | High if the same voltage, LVTTL interface, and SDRAM command set are retained | Expected to be close due to same Winbond W9812G6 family and 54-TSOP II style | Lower speed grade than
| Same-family continuity may simplify documentation and approval | Availability depends on distributor stock and production status | May be cost-effective if available from existing Winbond supply channels | Designs with configurable SDRAM timing and moderate clock frequency | Same family, familiar behavior, easier qualification path | Not ideal for systems requiring full 200 MHz timing margin |
| ISSI IS42S16800F-5TLI | Strong match for 3.3 V x16 SDRAM buses; verify AC timing and mode settings | 54-TSOP II package class supports potential PCB compatibility after pinout confirmation | Comparable 200 MHz-class option, often suitable for higher-speed SDRAM designs | ISSI is commonly used for industrial and long-life embedded memory support | Generally available through industrial memory channels, subject to market conditions | May carry a premium when industrial grade and long-term availability are needed | Industrial control, networking, embedded computing, systems using high SDRAM clock rates | Good balance of speed, temperature range, and replacement practicality | Requires datasheet-level timing and pin verification before release |
| ESMT M12L128168A-5TG2I | Good match for 3.3 V LVTTL SDRAM applications when timing is aligned | 54-TSOP II package class; footprint confirmation required | 200 MHz-class alternative, suitable where speed margin must be preserved | Useful for embedded and industrial designs; supply chain should be checked by exact suffix | Availability may vary by region and distributor | Often competitive, but pricing depends on lot size and sourcing channel | HMI, POS, control modules, industrial electronics, consumer-industrial products | Maintains density, x16 width, voltage, package class, and speed class | Ordering-code variations and timing details must be controlled carefully |
| Alliance Memory AS4C8M16SA-6TIN | Compatible with many 3.3 V SDRAM controllers if configured within timing limits | 54-TSOP II package style supports legacy SDRAM board designs | Usually slower than the Winbond -5I speed grade; not a direct 200 MHz match | Alliance Memory is often selected for legacy memory continuity | Generally positioned for ongoing support of older memory types | Can be attractive for maintenance and long-life programs | Designs running below the original 200 MHz limit, repair builds, mature embedded systems | Strong legacy support and practical sourcing path | Speed limitation may require firmware or controller timing changes |
| Micron MT48LC8M16A2P-6A IT | Electrically suitable for many 3.3 V x16 SDRAM systems; verify controller timing table | 54-TSOP II package class; pinout comparison required | PC133-class performance, below the 200 MHz rating of
| Well-known legacy SDRAM family, but lifecycle status must be managed | May be constrained by discontinuation or limited authorized stock | Pricing can vary significantly for legacy Micron SDRAM | Existing designs originally validated around 100/133 MHz SDRAM timing | Extensive historical use and documentation | Not suitable where the memory clock requires 200 MHz-class operation |
| Samsung K4S281632K-UC75 | May match 3.3 V x16 SDRAM requirements depending on exact suffix and timing | TSOP II package class; confirm pinout and body dimensions | Typically legacy SDRAM speed class; may be slower than
| Lifecycle and sourcing consistency can be challenging | Often found in legacy or broker channels rather than current production | Cost may be unpredictable due to availability | Repair, controlled substitution, older consumer or embedded boards | Useful for legacy compatibility where already validated | Temperature grade, lifecycle, and sourcing traceability need close review |
For a design operating near 200 MHz, ISSI
IS42S16800F-5TLI
and ESMT
IS42S16800F-5TLI
ISSI, Integrated Silicon Solution Inc
IC DRAM 128MBIT PAR 54TSOP II
9943
M12L128168A
-5TG2I are generally stronger
M12L128168A
ESMT
1021
8080
W9812G6KH-5I
TR replacement candidates because they better preserve the speed class. If the memory controller is configured for lower SDRAM frequencies, Winbond
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
W9812G6KH-6I
, Alliance Memory
W9812G6KH-6I
Winbond Electronics
IC DRAM 128MBIT PAR 54TSOP II
6658
AS4C8M16SA-6TIN
, or Micron
AS4C8M16SA-6TIN
Alliance Memory, Inc.
IC DRAM 128MBIT PAR 54TSOP II
12214
MT48LC8M16A2P-6A
IT may be practical options after timing validation. Samsung
MT48LC8M16A2P-6A
Micron
MT48LC8M16A2P-6A MICRON TSOP
5058
K4S281632K-UC75
is more suitable for legacy replacement workflows where prior platform validation or controlled testing is available.
K4S281632K-UC75
SMASUNG
K4S281632K-UC75 SAMSUNG TSOP54
25997
Before approving any alternative part number, compare the datasheets for pin assignment, bank architecture, row and column addressing, CAS latency support, tRCD, tRP, tRAS, tRC, refresh timing, output drive behavior, standby current, operating temperature, MSL rating, and packaging suffix. Prototype testing should include cold and hot temperature checks, memory stress patterns, boot cycling, suspend/resume behavior, and long-duration operation under worst-case supply tolerance.
For quotations and sourcing support for
W9812G6KH-5I
TR replacement parts such as ISSI
W9812G6KH-5I
Winbond Electronics
IC DRAM 128MBIT LVTTL 54TSOP II
21324
IS42S16800F-5TLI
, ESMT
IS42S16800F-5TLI
ISSI, Integrated Silicon Solution Inc
IC DRAM 128MBIT PAR 54TSOP II
9943
M12L128168A
-5TG2I, Alliance Memory
M12L128168A
ESMT
1021
8080
AS4C8M16SA-6TIN
, Micron
AS4C8M16SA-6TIN
Alliance Memory, Inc.
IC DRAM 128MBIT PAR 54TSOP II
12214
MT48LC8M16A2P-6A
IT, Samsung
MT48LC8M16A2P-6A
Micron
MT48LC8M16A2P-6A MICRON TSOP
5058
K4S281632K-UC75
, and Winbond
K4S281632K-UC75
SMASUNG
K4S281632K-UC75 SAMSUNG TSOP54
25997
W9812G6KH-6I
, visit IC-Components.com or email Info@IC-Components.com.
W9812G6KH-6I
Winbond Electronics
IC DRAM 128MBIT PAR 54TSOP II
6658





