The Vishay Sprague M39003/01-2504 is a hermetically sealed tantalum capacitor designed for high-reliability applications requiring robust performance across extreme temperature conditions. With a capacitance of 180 µF at 10 V and ±10% tolerance, this component belongs to the CSR13 series and conforms to MIL-PRF-39003/1 military specifications, making it suitable for aerospace, defense, and mission-critical industrial systems where failure is not an option.
This axial through-hole tantalum capacitor features a hermetically sealed construction that protects internal elements from moisture, contaminants, and environmental stress. The sealed enclosure contributes to long-term stability and maintains electrical performance across an operating temperature range of -55°C to 125°C, addressing thermal cycling demands in avionics power supplies, satellite electronics, and rugged field equipment. The physical dimensions of 0.351" diameter by 0.786" length (8.92mm x 19.96mm) correspond to the manufacturer size code D, offering a compact footprint for dense circuit layouts while maintaining adequate capacitance density.
The M39003/01-2504 carries a P-level failure rate specification of 0.1%, indicating high statistical reliability suitable for systems where component-level predictability directly impacts mission success. This failure rate classification aligns with military-grade quality standards and supports MTBF calculations in reliability engineering. The axial lead configuration facilitates traditional through-hole assembly and allows for secure mechanical mounting in vibration-prone environments, a common requirement in mobile defense platforms and airborne instrumentation.
Tantalum capacitors of this type provide stable capacitance over temperature and exhibit low leakage current compared to electrolytic alternatives, which is beneficial in low-power bias circuits, voltage regulation stages, and analog signal filtering. The 10 V rating positions this capacitor for use in single-supply digital logic buffers, sensor interface circuits, and low-voltage DC-DC converter output stages where ripple suppression and transient absorption are needed. The ±10% tolerance is appropriate for coupling, bypassing, and bulk energy storage roles where precise capacitance matching is less stringent than in tuned or timing applications.
While the datasheet does not specify ESR, hermetically sealed tantalum capacitors generally offer moderate ESR values that balance filtering effectiveness with thermal dissipation in moderate switching frequencies. This characteristic suits power distribution networks in mixed-signal designs and point-of-load regulation where controlled impedance at mid-frequency ranges enhances stability. The absence of moisture sensitivity level classification reflects the hermetic sealing, which inherently protects the tantalum pellet and minimizes hygroscopic concerns during storage and handling.
The part is currently active in production and available in bulk packaging, with inventory accessible for procurement in defense upgrade programs, legacy system maintenance, and new designs requiring MIL-PRF-39003 compliance. It is important to note that this component is RoHS non-compliant and REACH-affected, factors that should be considered during sourcing for commercial applications subject to environmental regulations. The ECCN classification of EAR99 indicates standard export control status, while the HTSUS code 8532.21.0020 applies for customs and import documentation.
M39003/01-2504 (1)
Replacement Challenges Around Vishay Sprague M39003/01-2504 Axial Tantalum Capacitors
Replacing Vishay Sprague M39003/01-2504 is not only a matter of matching “180 µF, 10 V.” This component is a hermetically sealed, through-hole axial tantalum capacitor built to the MIL-PRF-39003/1 CSR13 family, with ±10% capacitance tolerance, high-reliability screening, and a P failure-rate level of 0.1%. In existing aerospace, defense, industrial control, instrumentation, and long-life power assemblies, the replacement decision must consider electrical derating, mechanical fit, qualification level, polarity, leakage behavior, environmental exposure, and documentation requirements.
Common replacement or alternative part numbers to evaluate include:
- Vishay Sprague M39003/01-2504
- KEMET M39003/01-2504
- KEMET T110D187K010AS
- KEMET T212D187K010AS
- Vishay Sprague 135D187X0010F6
- AVX TAP187K010SCS
The closest replacement is normally another QPL-qualified M39003/01-2504 from an approved manufacturer. Commercial axial or radial tantalum capacitors may work in less constrained designs, but they usually require validation for reliability, mounting, leakage current, surge behavior, and environmental robustness.
What Defines the Vishay Sprague M39003/01-2504 Original Component
Vishay Sprague M39003/01-2504 is a 180 µF, 10 V, hermetically sealed tantalum capacitor in an axial through-hole package. Its military CSR13 construction and MIL-PRF-39003/1 association are the main factors that separate it from general-purpose tantalum capacitors.
| Parameter | Vishay Sprague M39003/01-2504 Characteristics | Replacement Relevance |
|---|---|---|
| Manufacturer | Vishay Sprague | Defines original source and baseline qualification expectations |
| Capacitance | 180 µF | Replacement should normally stay at 180 µF unless circuit stability, timing, or ripple behavior is revalidated |
| Tolerance | ±10% | A wider tolerance can alter filter response, hold-up time, or timing margin |
| Rated Voltage | 10 V | Replacement voltage rating should meet the same rating and circuit derating policy |
| Dielectric / Type | Hermetically sealed tantalum | Influences moisture resistance, long-term leakage stability, and reliability in harsh environments |
| Series / Specification | Military, MIL-PRF-39003/1, CSR13 | Important for controlled designs requiring military drawing compliance |
| Failure Rate | P, 0.1% | Replacement with a different failure-rate grade may not satisfy reliability documentation |
| Mounting | Through-hole axial | Affects PCB footprint, lead forming, vibration response, and service replacement |
| Case Size | 0.351 in diameter x 0.786 in length, approximately 8.92 mm x 19.96 mm | Mechanical compatibility must be checked against lead spacing, clearance, and mounting restraints |
| Temperature Range | -55°C to +125°C | Alternatives must support the same thermal operating envelope if used in high- or low-temperature equipment |
| RoHS Status | RoHS non-compliant | May influence procurement in RoHS-controlled assemblies, although legacy military designs often retain original materials |
The component is typically used for power-rail filtering, energy storage, decoupling, timing networks, and low-voltage supply stabilization in equipment where long service life and environmental stability matter. Because it is an axial hermetic tantalum capacitor, a replacement should be evaluated beyond capacitance and voltage. Leakage current, surge current capability, ESR, ripple current, polarity marking, lead finish, screening level, and qualification documentation can all affect whether the substitute is acceptable in the final assembly.
Candidate Replacements for Vishay Sprague M39003/01-2504 and Their Engineering Fit
The replacement options below range from direct military equivalents to commercial alternatives that may require design review. The best choice depends on whether the assembly requires MIL-PRF-39003 compliance, exact axial fit, hermetic sealing, or only equivalent electrical function.
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Vishay Sprague | M39003/01-2504 | 180 µF, ±10%, 10 V, axial, hermetically sealed tantalum, MIL-PRF-39003/1 CSR13, P failure rate | Original military-grade high-reliability capacitor | Military power supplies, avionics modules, rugged industrial electronics, legacy control systems | Baseline original part with matching electrical, mechanical, and qualification characteristics | RoHS non-compliant; availability may vary by lot and documentation requirements | First choice when the approved drawing, BOM, or qualification record specifies Vishay Sprague M39003/01-2504 |
| KEMET | M39003/01-2504 | 180 µF, ±10%, 10 V, axial hermetic tantalum, MIL-PRF-39003/1 equivalent ordering number | QPL-style military replacement when supplied under the same full military part number | Defense electronics, aerospace assemblies, high-reliability through-hole power filtering | Same military part number can provide form-fit-function compatibility if supplied with required certification | Manufacturer-specific markings, lead finish, date code, and QPL status should be verified before approval | Best direct second-source option when the design allows approved manufacturers under the same M39003 drawing |
| KEMET | T110D187K010AS | 180 µF, ±10%, 10 V, axial hermetically sealed solid tantalum, D-size style | Commercial axial hermetic tantalum construction | Industrial control boards, instrumentation, long-life power modules | Matches the main capacitance, voltage, tolerance, and axial hermetic concept | May not carry the same MIL-PRF-39003 failure-rate level or documentation as M39003/01-2504 | Suitable when electrical and mechanical compatibility are required but full military failure-rate qualification is not mandatory |
| KEMET | T212D187K010AS | 180 µF, ±10%, 10 V, axial hermetically sealed tantalum, military-oriented series | Designed for high-reliability axial applications | Rugged electronics, defense-adjacent systems, long-life regulated supplies | Offers similar capacitance, voltage, axial mounting, and hermetic construction | Exact screening, failure-rate grade, and drawing compliance must be checked against project requirements | Practical alternative for high-reliability assemblies where M39003 documentation is not strictly required or where an approved equivalent is acceptable |
| Vishay Sprague | 135D187X0010F6 | 180 µF, 10 V, axial tantalum, hermetic wet tantalum family depending on configuration | High-capacitance axial tantalum option with robust construction | Filtering, hold-up energy, low-voltage DC rails | Electrical value and axial mounting can align with the original function in some circuits | Wet tantalum behavior, ESR, leakage, ripple, surge response, and qualification differ from solid MIL-PRF-39003 CSR13 parts | Consider only after circuit-level validation, especially in power supply or timing-sensitive positions |
| AVX | TAP187K010SCS | 180 µF, ±10%, 10 V, radial dipped solid tantalum | General-purpose through-hole tantalum capacitor | Commercial power decoupling, consumer and industrial PCB assemblies | Can provide similar nominal capacitance and voltage rating | Not axial, not hermetically sealed, not MIL-PRF-39003, different footprint and environmental capability | Use only for redesigns, prototypes, or non-military applications where board layout and reliability requirements allow substitution |
For a controlled build, KEMET M39003/01-2504 is the most direct alternative because the military part number remains unchanged. KEMET T110D187K010AS and KEMET T212D187K010AS are closer engineering substitutes than general-purpose dipped tantalum capacitors because they preserve the axial hermetic format. Vishay Sprague 135D187X0010F6 may be useful where axial mounting and capacitance are more important than identical solid tantalum behavior, but it needs electrical validation. AVX TAP187K010SCS is better treated as a redesign alternative rather than a drop-in replacement.
Engineering Comparison of Vishay Sprague M39003/01-2504 Replacement Options
Replacement selection should begin with the constraints of the existing assembly: whether the BOM requires the exact military part number, whether the PCB only accepts axial leads, whether the capacitor is exposed to wide temperature cycling, and whether leakage current or ESR affects regulation loop stability.
| Decision Factor | Vishay Sprague M39003/01-2504 | KEMET M39003/01-2504 | KEMET T110D187K010AS | KEMET T212D187K010AS | Vishay Sprague 135D187X0010F6 | AVX TAP187K010SCS |
|---|---|---|---|---|---|---|
| Electrical Compatibility | Original reference | Usually equivalent when supplied to same military number | Good nominal match; verify leakage, ESR, and surge limits | Good nominal match; verify screening and electrical limits | Capacitance and voltage match, but wet tantalum behavior may differ | Capacitance and voltage match, but electrical behavior and derating need review |
| Mechanical Compatibility | Axial through-hole, original case size | Expected axial compatibility; confirm case dimensions and lead details | Axial format supports easier retrofit | Axial format supports easier retrofit | Axial format may fit, but body and lead details must be checked | Radial package; not drop-in for axial footprint |
| Qualification Fit | MIL-PRF-39003/1 CSR13, P failure rate | Strong fit if QPL and documentation are confirmed | Commercial or series-level substitute, not necessarily same failure-rate grade | High-reliability option, but documentation must be compared | Different product family and qualification basis | General-purpose commercial option |
| Reliability Considerations | Established baseline for harsh environments | Comparable if sourced with correct certification | Good for many long-life systems, but may not satisfy military drawing controls | Often stronger fit than general-purpose parts for rugged applications | Can be reliable in suitable circuits, but failure behavior differs | Lower environmental equivalence compared with hermetic axial parts |
| Performance Trade-Off | Known behavior in approved design | Minimal change when approved as same M39003 part | Possible ESR/leakage variation from original | Possible screening and specification differences | ESR, leakage, and transient behavior require review | Layout, ESR, leakage, and thermal environment differ |
| Package Availability | May be limited by military-grade inventory | Useful second-source path | May be easier to source in commercial channels | Availability depends on series and screening level | Depends on value and voltage availability | Usually easier to source but requires redesign |
| Cost Consideration | Typically higher due to military grade | Similar military-grade cost structure | May reduce cost if full military compliance is unnecessary | May sit between military and commercial options | Application-dependent | Often lower cost, but engineering rework may offset savings |
| Best-Fit Scenario | Approved production, repair, and maintenance of original equipment | Direct replacement where alternate approved manufacturer is acceptable | Industrial or non-flight hardware needing axial hermetic compatibility | High-reliability equipment with flexible approval requirements | Circuits where wet tantalum characteristics are acceptable after testing | New PCB layouts or commercial redesigns |
| Main Limitation | Availability and compliance restrictions | Must verify authentic sourcing and full documentation | Not a guaranteed MIL-PRF-39003/1 substitute | Not automatically identical to M39003/01-2504 | Not equivalent at dielectric/behavior level | Not mechanically or environmentally equivalent |
If the assembly documentation specifies Vishay Sprague M39003/01-2504 without allowing alternates, the safest path is the same manufacturer part number or a formally approved KEMET M39003/01-2504 equivalent. If the requirement is functional compatibility rather than strict military drawing compliance, KEMET T110D187K010AS and KEMET T212D187K010AS are reasonable axial hermetic tantalum capacitor replacements to evaluate. Vishay Sprague 135D187X0010F6 and AVX TAP187K010SCS should be considered only when the design authority allows broader substitution and the circuit can be tested for leakage, ESR, ripple, start-up stress, thermal behavior, and mounting reliability.
For current availability, pricing, and sourcing of Vishay Sprague M39003/01-2504 replacement parts and alternatives, obtain quotations through IC-Components.com or email Info@IC-Components.com.





