Choose your country or region.

EnglishFrançaispolskiSlovenija한국의DeutschSvenskaSlovenskáMagyarországItaliaहिंदीрусскийTiếng ViệtSuomiespañolKongeriketPortuguêsภาษาไทยБългарски езикromânescČeštinaGaeilgeעִבְרִיתالعربيةPilipinoDanskMelayuIndonesiaHrvatskaفارسیNederlandTürk diliΕλλάδαRepublika e ShqipërisëአማርኛAzərbaycanEesti VabariikEuskeraБеларусьíslenskaBosnaAfrikaansIsiXhosaisiZuluCambodiaსაქართველოҚазақшаAyitiHausaКыргыз тилиGalegoCatalàCorsaKurdîLatviešuພາສາລາວlietuviųLëtzebuergeschmalaɡasʲМакедонскиMaoriМонголулсবাংলা ভাষারမြန်မာनेपालीپښتوChicheŵaCрпскиSesothoසිංහලKiswahiliТоҷикӣاردوУкраїнаO'zbekગુજરાતીಕನ್ನಡkannaḍaதமிழ் மொழி繁体中文
Home > Products > Resistors > Through Hole Resistors > Y007810K0000T9L
Vishay Foil Resistors (Division of Vishay Precisio Group)
Y007810K0000T9L ImageView larger image
Image may be representation.
See specs for product details.

Y007810K0000T9L

In Stock 2730 pcs Reference Price(In US Dollars)
25+
$74.8513
Manufacturer Part Number:
Y007810K0000T9L
Manufacturer / Brand
Vishay Foil Resistors (Division of Vishay Precisio Group)
Part of Description:
RES 10K OHM 0.3W 0.01% RADIAL
Datasheets:
Y007810K0000T9L.pdf
Lead Free Status / RoHS Status:
ROHS3 Compliant
Stock Condition:
New original, 2730 pcs Stock Available.
ECAD Model:
Ship From:
Hong Kong
Shipment Way:
DHL/Fedex/TNT/UPS

Inquiry Online

Please complete all required fields with your contact information.Click "SUBMIT REQUEST" we will contact you shortly by email. Or Email us: Info@IC-Components.com
Part Number
Manufacturer
Require Quantity
Target Price(USD)
Company Name
Contact Name
E-mail
Phone
Message
Please enter Verify Code and click "Submit"
Part Number Y007810K0000T9L
Manufacturer / Brand Vishay Foil Resistors (Division of Vishay Precisio Group)
Stock Quantity 2730 pcs Stock
Category Resistors > Through Hole Resistors
Description RES 10K OHM 0.3W 0.01% RADIAL
Lead Free Status / RoHS Status: ROHS3 Compliant
Tolerance ±0.01%
Temperature Coefficient 0.0ppm/°C
Supplier Device Package -
Size / Dimension 0.415' L x 0.162' W (10.54mm x 4.11mm)
Series VHP100
Resistance 10 kOhms
Power (Watts) 0.3W
Package / Case Radial
Package Bulk
Operating Temperature -55°C ~ 125°C
Number of Terminations 2
Height - Seated (Max) 0.450' (11.43mm)
Features Moisture Resistant, Non-Inductive
Failure Rate -
Composition Metal Foil

Packaging & ESD

Industry-standard static shielding packaging is used for electronic components.Anti-static, light-transparent materials allow easy identification of ICs and PCB assemblies.
The packaging structure provides electrostatic protection based on Faraday cage principles.This helps protect sensitive components from static discharge during handling and transportation.


All products are packed in ESD-safe anti-static packaging. Outer packaging labels include part number, brand, and quantity for clear identification. Goods are inspected prior to shipment to ensure proper condition and authenticity.

ESD protection is maintained throughout packing, handling, and global transportation. Secure packaging provides reliable sealing and resistance during transit. Additional cushioning materials are applied when required to protect sensitive components.

QC(Part Testing by IC Components)Quality Warranty

We can offer worldwide express delivery service, such as DHLor FedEx or TNT or UPS or other forwarder for shipment.

Global Shipment by DHL/FedEx/TNT/UPS

Shipping Fees reference DHL/FedEx
1). You can offer your express delivery account for shipment, ifyou haven’t any express account for shipment, we can offer our account inadvance.
2). Use our account for shipment, Shipment charges(Reference DHL/FedEx, Different Countries has different price.)
Shipment charges： (Reference DHL and FedEX)
Weight(KG): 0.00kg-1.00kg Price(USD$) : USD$60.00
Weight(KG): 1.00kg-2.00kg Price(USD$) : USD$80.00
* The price of cost is reference with DHL/FedEx. The detail charges, please contact us. Different country the express charges are different.



We accept the payment terms: Telegraphic Transfer(T/T), Credit Card, PayPal and Western Union.

PayPal:

PayPal Bank Information:
Company Name : IC COMPONENTS LTD
Paypal ID: Info@IC-Components.com

BANK TRANSFAR (Telegraphic Transfer)

Payment For Telegraphic Transfers:
Company Name : IC COMPONENTS LTD Beneficiary Account Number : 549-100669-701
Beneficiary Bank name : Bank of Communications (Hong Kong) Ltd Beneficiary Bank Code : 382 (for local payment)
Beneficiary Bank SWIFT : COMMHKHK
Beneficiary Bank Address : Tsuen Wan Market Street Branch 53 Market Street, Tsuen Wan N.T., Hong Kong

Any inquires or questions, please kindly contact us Email: Info@IC-Components.com


Frequently Asked Questions

Can Y007810K0000T9L be used as a gain-setting or reference resistor in precision ADC, DAC, or instrumentation amplifier circuits?
Yes. Y007810K0000T9L is well suited to precision gain-setting, divider, and reference networks where ratio stability and low drift matter. Its 0.01% tolerance and near-zero temperature coefficient help keep calibration and gain error small over temperature. In practice, the surrounding circuit still needs attention: keep the resistor away from hot components, avoid copper imbalance that can create thermal gradients, and verify that the input bias current and source impedance of the IC do not create extra offset errors. For best results with Y007810K0000T9L, match the resistor footprint to stable PCB materials and confirm the final system accuracy after soldering and thermal soak.
How much voltage and current can Y007810K0000T9L handle continuously in a design?
Y007810K0000T9L is rated at 0.3 W, so the steady-state limit depends on the applied voltage and current as well as ambient temperature. At the resistor limit, a 10 kΩ part corresponds to about 54.8 V RMS or 5.48 mA continuous current under ideal conditions. In real equipment, derate for enclosure temperature, airflow, and nearby heat sources. If Y007810K0000T9L is used in a divider or bleeder network, also check fault conditions, startup surges, and any transient voltage that may exceed the continuous rating even if average power looks acceptable.
Is Y007810K0000T9L a good choice for high-frequency, low-noise, or pulse applications?
Y007810K0000T9L is a practical option when you want a non-inductive resistor element, especially in precision analog paths where lead inductance can disturb settling or create small phase errors. The non-inductive metal foil construction helps reduce reactive behavior compared with common wirewound parts. Even so, the radial through-hole leads still add some parasitic inductance and capacitance, so Y007810K0000T9L is usually better for precision analog and pulse-shaping networks than for very high-frequency RF matching or transmission-line termination. If the circuit has fast edges, validate overshoot and settling on the assembled PCB.
Can Y007810K0000T9L replace a standard 10 kΩ 1% metal film resistor without circuit changes?
Often yes, but the swap is usually done for performance reasons rather than footprint-only reasons. Y007810K0000T9L will typically offer tighter initial accuracy and much lower drift than a common 10 kΩ 1% metal film resistor, which can improve calibration margin. Before replacing, check lead spacing, body size, and seated height, because the radial package may not match the original footprint. Also review whether the original circuit relied on the resistor’s higher parasitic inductance or different pulse-handling behavior, since Y007810K0000T9L is non-inductive and may change transient response. A production substitution should be followed by functional testing and, if needed, recalibration.
Is Y007810K0000T9L suitable for humid, washdown, or long-life industrial equipment?
Y007810K0000T9L is a reasonable choice for industrial systems because it is described as moisture resistant and has no moisture sensitivity level concern for storage and assembly. That said, moisture resistance does not eliminate the effects of flux residue, conformal coating gaps, condensation, or corrosion at the lead and solder interfaces. In long-life equipment, keep the PCB clean, use an appropriate coating when the environment demands it, and avoid placing Y007810K0000T9L where standing moisture or salt contamination can accumulate. Thermal cycling and mechanical stress should also be evaluated if the assembly sees vibration or frequent temperature swings.
What should I check before using Y007810K0000T9L in a replacement design where the original resistor was from another brand or series?
When migrating to Y007810K0000T9L from another precision resistor family, compare more than just the 10 kΩ value. Check tolerance class, temperature coefficient, long-term stability, power rating, package geometry, and whether the original part was inductive or non-inductive. If you are moving from a general-purpose metal film part to Y007810K0000T9L, the circuit may gain better precision but also require a more careful PCB layout because the tighter electrical performance can expose errors elsewhere in the chain. If the previous design used a different VPG Foil Resistors VHP100 variant or another manufacturer’s precision series, verify mechanical fit and production test limits before releasing the change.
Does Y007810K0000T9L work well for calibration networks that must stay stable over time and temperature?
Yes. Y007810K0000T9L is a strong fit for calibration networks, bridge arms, and ratio-critical circuits because the foil element is specified with very low temperature coefficient and tight tolerance. In a real system, the resistor itself may remain stable while the total calibration shifts due to PCB contamination, solder joint stress, or nearby components that warm unevenly. If Y007810K0000T9L is used in an instrument that is periodically calibrated, place it where airflow and self-heating are predictable, and avoid mounting it immediately beside power devices or regulators. That approach helps keep the circuit’s long-term trim behavior consistent.
Are there any assembly or mechanical limits to consider with Y007810K0000T9L in a through-hole design?
Yes. Y007810K0000T9L uses a radial through-hole package, so the PCB footprint, hole spacing, and seated height need to be checked before finalizing the layout. The body is larger than many surface-mount precision resistors, so dense boards may need extra keep-out area. In automated assembly, confirm whether the process is wave solder, selective solder, or hand insertion, since lead forming and insertion height can affect consistency. If Y007810K0000T9L is being used as a retrofit into an existing board, verify clearance to covers and adjacent parts, especially in vibration-prone or thermally constrained assemblies.

Recent Reviews

Leave Comment
Hello, you have not logged in, please log in
User Login

Forgot password?

No account yet? Register now

Tips
Please speak legally
Your email will be hidden
Please complete all required fields ( denoted with* )
Mark
5.0

You May Also Be Interested In:


Y007810K0000T9L

Y007810K0000T9L

Vishay Foil Resistors (Division of Vishay Precisio Group)

RES 10K OHM 0.3W 0.01% RADIAL

In Stock: 2730

Submit RFQ