The Susumu RG2012V-6490-D-T5 is a precision thin film chip resistor delivering 649 ohms resistance with ±0.5% tolerance in the standard 0805 (2012 metric) footprint. This surface mount component combines tight tolerance control with anti-sulfur protection and full AEC-Q200 automotive qualification, positioning it for applications where resistance stability and environmental durability directly impact circuit performance.
With a power rating of 0.125W and a temperature coefficient of ±5ppm/°C, this resistor maintains stable electrical characteristics across its -55°C to 155°C operating range. The thin film construction provides superior resistance accuracy compared to thick film alternatives, making it suitable for precision voltage dividers, feedback networks, current sensing circuits, and analog signal conditioning paths where measurement accuracy cannot be compromised by component drift.
The anti-sulfur feature addresses a specific reliability concern in industrial and automotive environments where sulfur-bearing gases can cause rapid degradation of silver terminations. This protection extends operational life in harsh atmospheric conditions including geothermal areas, manufacturing facilities, and certain geographic regions with elevated sulfur compound concentrations. Combined with AEC-Q200 qualification, the component meets automotive-grade stress testing requirements including temperature cycling, moisture resistance, and mechanical shock—criteria that validate its use in under-hood electronics, powertrain control modules, and safety-critical systems.
The 0805 package dimensions of 2.00mm × 1.25mm with 0.50mm maximum height support high-density PCB layouts while maintaining compatibility with standard pick-and-place assembly equipment. Dual terminations provide straightforward soldering profiles for both reflow and wave soldering processes. With MSL-1 rating, the component requires no special moisture precautions during storage or handling, simplifying inventory management and production scheduling.
This resistor serves applications requiring precise 649 ohm resistance values in automotive electronics, industrial sensors, measurement instrumentation, and power management circuits where component reliability under thermal stress and environmental exposure determines system-level performance. The RG series from Susumu represents a design choice when circuit specifications call for tolerance and stability beyond standard commercial-grade resistors, particularly in applications subject to automotive qualification requirements or extended temperature operation.
The component ships in tape and reel packaging for automated assembly integration and maintains RoHS3 compliance with REACH unaffected status, supporting global manufacturing and environmental regulatory requirements.
RG2012V-6490-D-T5 (1)
Replacement Challenges Around Susumu RG2012V-6490-D-T5 649 Ohm 0805 Thin Film Resistor
When a Susumu RG2012V-6490-D-T5 resistor is unavailable, nearing lifecycle risk, or needs a second-source option, selecting a replacement is not just a matter of matching 649 ohms. The substitute must fit the same 0805 PCB footprint, maintain acceptable tolerance and temperature drift, handle the required power dissipation, and meet reliability expectations such as anti-sulfur performance or AEC-Q200 qualification where the circuit requires it.
The main candidate replacement part numbers for RG2012V-6490-D-T5 are:
| Manufacturer | Candidate Part Number | Replacement Position |
|---|---|---|
| KOA Speer |
| Closest practical 0805 thin film alternative with 649Ω, ±0.5%, and tighter TCR than general-purpose resistors |
| KOA Speer |
| Electrically usable 649Ω, ±0.5% 0805 option where wider temperature drift is acceptable |
For precision analog circuits, current sensing networks, voltage dividers, feedback paths, instrumentation inputs, and automotive-related designs, the replacement decision should account for resistance accuracy over temperature, long-term stability, sulfur exposure, qualification requirements, and reel/package compatibility.
What Defines the Susumu RG2012V-6490-D-T5 Original Component
The Susumu RG2012V-6490-D-T5 is a 649 ohm thin film chip resistor in an 0805 package. Its engineering value comes from the combination of precision resistance, low temperature coefficient, environmental robustness, and automotive qualification.
| Parameter | Susumu RG2012V-6490-D-T5 Specification | Replacement Impact |
|---|---|---|
| Resistance | 649Ω | Substitute should use the same nominal value to avoid gain, bias, or divider-ratio changes |
| Tolerance | ±0.5% | Alternatives with ±0.5% are suitable for many precision networks without circuit recalibration |
| Power Rating | 0.125W / 1/8W | Replacement must support equivalent dissipation under worst-case voltage and ambient temperature |
| Package | 0805 / 2012 metric | Mechanical compatibility depends on land pattern, body size, and solder joint geometry |
| Technology | Thin film | Supports better stability and lower noise than many thick film alternatives |
| Temperature Coefficient | ±5ppm/°C | A key differentiator; higher-TCR replacements may shift circuit accuracy over temperature |
| Operating Temperature | -55°C to +155°C | Supports industrial and automotive temperature environments |
| Features | Anti-sulfur, AEC-Q200 | Relevant for automotive, outdoor, industrial, and sulfur-contaminated atmospheres |
| Packaging | Tape & Reel | Supports automated SMT assembly and production continuity |
The ±5ppm/°C TCR of RG2012V-6490-D-T5 is the main specification that may be difficult to duplicate with general replacement resistors. In a fixed divider, a higher-TCR alternative may still work if both resistors track similarly, but in precision gain-setting, reference scaling, bridge circuits, or temperature-exposed automotive electronics, the drift difference can affect accuracy.
Its anti-sulfur and AEC-Q200 characteristics also influence substitution. If the resistor is used near rubber materials, polluted industrial air, or automotive modules, replacing it with a non-anti-sulfur part may reduce long-term robustness even when the initial resistance value matches.
Candidate Replacements for Susumu RG2012V-6490-D-T5: RN732ATTD6490D25 and RN732ATTD6490D100
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace RG2012V-6490-D-T5 | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Susumu | RG2012V-6490-D-T5 | 649Ω, ±0.5%, 1/8W, 0805, thin film, ±5ppm/°C, -55°C to +155°C | Anti-sulfur, AEC-Q200, precision thin film, tape and reel | Automotive electronics, precision dividers, control modules, sensor interfaces, feedback networks | Original reference component | Baseline part; availability or sourcing risk may require second-source planning | Preferred option when anti-sulfur performance, AEC-Q200, and low TCR must be preserved |
| KOA Speer |
| 649Ω, ±0.5%, 0805, thin film class, typically ±25ppm/°C TCR | Precision chip resistor family, stable resistance performance, SMT assembly compatible | Precision analog circuits, voltage dividers, amplifier feedback, industrial control boards | Same resistance value, same tolerance class, same 0805 footprint, suitable power class for many 1/8W designs | TCR is higher than Susumu ±5ppm/°C; anti-sulfur and AEC-Q200 status should be verified for the exact ordered series/version | Best practical substitute where precision is needed but ±25ppm/°C drift is acceptable |
| KOA Speer |
| 649Ω, ±0.5%, 0805, thin film class, typically ±100ppm/°C TCR | Cost-sensitive precision-value resistor option, SMT-compatible packaging | General precision biasing, non-ratiometric dividers, low-drift requirement designs with moderate temperature range | Same nominal resistance, same tolerance, and same package size allow straightforward PCB replacement | Wider TCR may cause larger resistance shift over operating temperature; less suitable for high-accuracy temperature-variable circuits | Suitable when the circuit tolerance budget allows additional temperature drift and environmental requirements are less demanding |
RN732ATTD6490D25
is the stronger engineering alternative when the design needs to remain close to the original Susumu RG2012V-6490-D-T5 behavior. The resistance value and tolerance align well, and the 0805 package supports drop-in PCB compatibility in most layouts. The main trade-off is the increase from ±5ppm/°C to approximately ±25ppm/°C, which should be checked against the circuit error budget.
RN732ATTD6490D25
KOA Speer Electronics, Inc.
RES 649 OHM 0.5% 1/10W 0805
2000000
RN732ATTD6490D100
is better viewed as a functional replacement rather than a precision-equivalent replacement. It can fit the same footprint and match the 649Ω nominal value, but its wider TCR makes it more appropriate for circuits where temperature-induced resistance shift has limited impact.
RN732ATTD6490D100
KOA Speer Electronics, Inc.
RES 649 OHM 0.5% 1/10W 0805
2000000
Engineering Comparison of RG2012V-6490-D-T5 Replacement Options
| Evaluation Factor | Susumu RG2012V-6490-D-T5 | KOA Speer RN732ATTD6490D25 | KOA Speer RN732ATTD6490D100 | Engineering Decision Guidance |
|---|---|---|---|---|
| Electrical Compatibility | Original 649Ω, ±0.5%, 1/8W resistor | Strong match for resistance and tolerance | Strong match for resistance and tolerance | Both candidates can replace the nominal value, but TCR determines accuracy over temperature |
| Temperature Drift | ±5ppm/°C | Typically ±25ppm/°C | Typically ±100ppm/°C | Use
|
| Mechanical Fit | 0805 / 2012 metric | 0805 class | 0805 class | Both alternatives are generally compatible with the same PCB footprint, subject to land pattern verification |
| Reliability Features | Anti-sulfur, AEC-Q200 | Verify exact qualification and environmental rating | Verify exact qualification and environmental rating | For automotive or sulfur-exposed use, do not substitute unless qualification requirements are confirmed |
| Precision Analog Suitability | Strong due to low TCR and thin film construction | Good for many precision circuits | Limited for high-temperature-variation precision circuits | Feedback networks, references, and sensor paths favor lower TCR options |
| Automotive Suitability | Designed with AEC-Q200 rating | Possible only if ordered variant documentation supports it | Possible only if ordered variant documentation supports it | If the BOM requires AEC-Q200, documentation alignment matters as much as electrical fit |
| Cost and Availability | Original part may have limited availability depending on supply | Often useful as a second-source precision option | May be easier to source or lower cost depending on market | Broader TCR options may improve sourcing flexibility but reduce performance margin |
| Best Use Case | Original production, automotive, anti-sulfur, high-stability designs | Second-source replacement for precision 649Ω 0805 applications | General replacement where value and package matter more than temperature drift | Select based on circuit error budget, environment, and qualification requirements |
| Main Limitation | Availability risk may require substitutes | Not a full match to ±5ppm/°C unless circuit allows drift | Largest drift difference from original | Avoid treating all 649Ω ±0.5% 0805 resistors as equivalent |
For a like-for-like replacement strategy, the first choice remains Susumu RG2012V-6490-D-T5. If a second source is needed, KOA Speer
RN732ATTD6490D25
is usually the more suitable alternative because it preserves the 649Ω value, ±0.5% tolerance, and 0805 format while keeping temperature drift within a more controlled range. KOA Speer
RN732ATTD6490D25
KOA Speer Electronics, Inc.
RES 649 OHM 0.5% 1/10W 0805
2000000
RN732ATTD6490D100
can be considered where the resistor is not part of a high-accuracy temperature-sensitive network.
RN732ATTD6490D100
KOA Speer Electronics, Inc.
RES 649 OHM 0.5% 1/10W 0805
2000000
Before approving any substitute, compare the full datasheets, confirm solder pad compatibility, check derating at the application temperature, and verify whether anti-sulfur and AEC-Q200 requirements apply to the end product.
For quotations and sourcing support for Susumu RG2012V-6490-D-T5,
RN732ATTD6490D25
,
RN732ATTD6490D25
KOA Speer Electronics, Inc.
RES 649 OHM 0.5% 1/10W 0805
2000000
RN732ATTD6490D100
, and related replacement parts, request pricing through IC-Components.com or email Info@IC-Components.com.
RN732ATTD6490D100
KOA Speer Electronics, Inc.
RES 649 OHM 0.5% 1/10W 0805
2000000




