Choose your country or region.

EnglishFrançaispolskiSlovenija한국의DeutschSvenskaSlovenskáMagyarországItaliaहिंदीрусскийTiếng ViệtSuomiespañolKongeriketPortuguêsภาษาไทยБългарски езикromânescČeštinaGaeilgeעִבְרִיתالعربيةPilipinoDanskMelayuIndonesiaHrvatskaفارسیNederlandTürk diliΕλλάδαRepublika e ShqipërisëአማርኛAzərbaycanEesti VabariikEuskeraБеларусьíslenskaBosnaAfrikaansIsiXhosaisiZuluCambodiaსაქართველოҚазақшаAyitiHausaКыргыз тилиGalegoCatalàCorsaKurdîLatviešuພາສາລາວlietuviųLëtzebuergeschmalaɡasʲМакедонскиMaoriМонголулсবাংলা ভাষারမြန်မာनेपालीپښتوChicheŵaCрпскиSesothoසිංහලKiswahiliТоҷикӣاردوУкраїнаO'zbekગુજરાતીಕನ್ನಡkannaḍaதமிழ் மொழி繁体中文
Home > Products > Crystals, Oscillators, Resonators > Oscillators > SIT8008BI-83-33E-30.000000T
SiTime
SIT8008BI-83-33E-30.000000T ImageView larger image
Image may be representation.
See specs for product details.

SIT8008BI-83-33E-30.000000T

In Stock 94152 pcs Reference Price(In US Dollars)
1+
$0.5983
200+
$0.2311
500+
$0.2238
1000+
$0.2195
Manufacturer Part Number:
SIT8008BI-83-33E-30.000000T
Manufacturer / Brand
SiTime
Part of Description:
OSC MEMS 30.0000MHZ LVCMOS SMD
Datasheets:
SIT8008BI-83-33E-30.000000T(1).pdfSIT8008BI-83-33E-30.000000T(2).pdf
Lead Free Status / RoHS Status:
Lead free / RoHS Compliant
Stock Condition:
New original, 94152 pcs Stock Available.
ECAD Model:
Ship From:
Hong Kong
Shipment Way:
DHL/Fedex/TNT/UPS

Inquiry Online

Please complete all required fields with your contact information.Click "SUBMIT REQUEST" we will contact you shortly by email. Or Email us: Info@IC-Components.com
Part Number
Manufacturer
Require Quantity
Target Price(USD)
Company Name
Contact Name
E-mail
Phone
Message
Please enter Verify Code and click "Submit"
Part Number SIT8008BI-83-33E-30.000000T
Manufacturer / Brand SiTime
Stock Quantity 94152 pcs Stock
Category Crystals, Oscillators, Resonators > Oscillators
Description OSC MEMS 30.0000MHZ LVCMOS SMD
Lead Free Status / RoHS Status: Lead free / RoHS Compliant
Voltage - Supply 3.3V
Type XO (Standard)
Standard Package 3,000
Size / Dimension 0.276" L x 0.197" W (7.00mm x 5.00mm)
Series SiT8008B
Ratings -
Part Status Active
Packaging Tape & Reel (TR)
Package / Case 4-SMD, No Lead
Output HCMOS, LVCMOS
Other Names SIT8008BI-83-33E-30.00000T
SIT8008BI-83-33E-30.00000T-ND
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Manufacturer Standard Lead Time 8 Weeks
Lead Free Status / RoHS Status Lead free / RoHS Compliant
Height - Seated (Max) 0.039" (1.00mm)
Function Enable/Disable
Frequency Stability ±50ppm
Frequency 30MHz
Detailed Description 30MHz XO (Standard) HCMOS, LVCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead
Current - Supply (Max) 4.5mA
Current - Supply (Disable) (Max) 4.2mA
Base Resonator MEMS

Packaging & ESD

Industry-standard static shielding packaging is used for electronic components.Anti-static, light-transparent materials allow easy identification of ICs and PCB assemblies.
The packaging structure provides electrostatic protection based on Faraday cage principles.This helps protect sensitive components from static discharge during handling and transportation.


All products are packed in ESD-safe anti-static packaging. Outer packaging labels include part number, brand, and quantity for clear identification. Goods are inspected prior to shipment to ensure proper condition and authenticity.

ESD protection is maintained throughout packing, handling, and global transportation. Secure packaging provides reliable sealing and resistance during transit. Additional cushioning materials are applied when required to protect sensitive components.

QC(Part Testing by IC Components)Quality Warranty

We can offer worldwide express delivery service, such as DHLor FedEx or TNT or UPS or other forwarder for shipment.

Global Shipment by DHL/FedEx/TNT/UPS

Shipping Fees reference DHL/FedEx
1). You can offer your express delivery account for shipment, ifyou haven’t any express account for shipment, we can offer our account inadvance.
2). Use our account for shipment, Shipment charges(Reference DHL/FedEx, Different Countries has different price.)
Shipment charges： (Reference DHL and FedEX)
Weight(KG): 0.00kg-1.00kg Price(USD$) : USD$60.00
Weight(KG): 1.00kg-2.00kg Price(USD$) : USD$80.00
* The price of cost is reference with DHL/FedEx. The detail charges, please contact us. Different country the express charges are different.



We accept the payment terms: Telegraphic Transfer(T/T), Credit Card, PayPal and Western Union.

PayPal:

PayPal Bank Information:
Company Name : IC COMPONENTS LTD
Paypal ID: Info@IC-Components.com

BANK TRANSFAR (Telegraphic Transfer)

Payment For Telegraphic Transfers:
Company Name : IC COMPONENTS LTD Beneficiary Account Number : 549-100669-701
Beneficiary Bank name : Bank of Communications (Hong Kong) Ltd Beneficiary Bank Code : 382 (for local payment)
Beneficiary Bank SWIFT : COMMHKHK
Beneficiary Bank Address : Tsuen Wan Market Street Branch 53 Market Street, Tsuen Wan N.T., Hong Kong

Any inquires or questions, please kindly contact us Email: Info@IC-Components.com


Frequently Asked Questions

Can the SIT8008BI-83-33E-30.000000T be used directly in a 3.3V MCU or FPGA clock input without level shifting?
The SIT8008BI-83-33E-30.000000T is a 3.3V HCMOS/LVCMOS oscillator, so it is generally suitable for direct connection to 3.3V clock inputs that accept CMOS-level signaling. The main design check is input compatibility: verify the receiving device’s VIH/VIL thresholds, allowable overshoot, and clock pin loading. If the target input is 1.8V-only or expects differential clocking, the SIT8008BI-83-33E-30.000000T is not a direct fit.
Is the SIT8008BI-83-33E-30.000000T a good choice when replacing a quartz crystal and load capacitors?
The SIT8008BI-83-33E-30.000000T can replace a crystal-only clock source only if the circuit is designed for an active oscillator output, not a passive resonator. Compared with a crystal plus load capacitors, this part provides a buffered clock signal and usually simplifies startup and frequency control. The trade-off is that the PCB footprint, supply pin, and output behavior must match an oscillator input path rather than a crystal amplifier circuit.
What should I check before using the SIT8008BI-83-33E-30.000000T in an industrial design with -40C to +85C operation?
For the SIT8008BI-83-33E-30.000000T, verify that the full system timing budget still holds across temperature, supply variation, and aging within the specified operating range. If the clock feeds a communication interface, ADC, or timing-sensitive MCU, check whether ±50ppm is enough for your protocol margin at cold start and hot soak. In long-term industrial use, supply quality, thermal cycling, and nearby noise sources can matter as much as the oscillator’s nominal rating.
Can the SIT8008BI-83-33E-30.000000T drive multiple clock loads from one output?
The SIT8008BI-83-33E-30.000000T is intended to drive a clock input directly, but fanout should be treated conservatively. If you need to feed several devices, check total input capacitance, trace length, edge-rate effects, and whether the oscillator output can maintain signal integrity at the farthest load. In many designs, a dedicated clock buffer is a better choice than splitting one oscillator output to multiple destinations.
Is the SIT8008BI-83-33E-30.000000T suitable for replacing a 30MHz oscillator from another brand like Epson, Epson Toyocom, Abracon, or ECS?
The SIT8008BI-83-33E-30.000000T can be a practical replacement only if the original part matches on frequency, supply voltage, output logic family, package footprint, and pinout. Many 30MHz oscillators from brands such as Epson, Abracon, or ECS differ in enable pin behavior, start-up characteristics, or output drive, even when the label looks similar. For a drop-in migration, confirm the pad layout and the startup time against the original design before releasing a board revision.
What are the main risks when migrating from a 1.8V clock source to the SIT8008BI-83-33E-30.000000T?
The SIT8008BI-83-33E-30.000000T runs from 3.3V, so the biggest migration risk is input compatibility on the destination device and any adjacent circuitry. A 1.8V timing domain may need level translation, a different power rail, or a different oscillator option entirely. It is also worth checking power sequencing, because a 3.3V clock source can back-drive or overstress lower-voltage pins if the interface was designed around a 1.8V source.
How sensitive is the SIT8008BI-83-33E-30.000000T to PCB layout and decoupling?
Like most active oscillators, the SIT8008BI-83-33E-30.000000T benefits from a short, low-inductance supply return path and a local decoupling capacitor placed close to the power pin. Poor layout can introduce supply noise that shows up as jitter, edge distortion, or intermittent startup issues. Keep the clock trace short, avoid routing near noisy switch-mode nodes, and preserve a clean ground reference under the device and clock path.
Is the SIT8008BI-83-33E-30.000000T appropriate for precision timing applications that need tighter than ±50ppm?
The SIT8008BI-83-33E-30.000000T is not the right choice if the application needs tighter frequency tolerance than ±50ppm over the full operating conditions. That tolerance is often adequate for many digital systems, but designs with strict synchronization, narrow protocol margins, or long-term drift sensitivity may need a more stable clock source or a disciplined reference. For those cases, compare the full error budget, including temperature, aging, and system-level tolerance stacking.
Can the SIT8008BI-83-33E-30.000000T be used in place of a programmable oscillator with a different factory-set frequency?
Only if the target design specifically needs 30MHz. The SIT8008BI-83-33E-30.000000T is a 30.000000MHz device, so replacing a programmable oscillator set to another frequency can break bus timing, PHY lock ranges, or ADC sample timing. Even small frequency differences can matter in USB, Ethernet, wireless, or processor clock trees, so the full system timing chain should be checked before substitution.
What should I consider if I am selecting the SIT8008BI-83-33E-30.000000T for long-life or high-reliability equipment?
For the SIT8008BI-83-33E-30.000000T, review solder joint reliability, vibration exposure, thermal cycling, and power rail quality in addition to the oscillator specification. SMD7050-4P packages are common and robust in many assemblies, but board flex, reflow profile, and mechanical stress can still affect field reliability. For long-life systems, it is also useful to validate aging margin against the timing tolerance your product can tolerate after years of service.

Recent Reviews

Leave Comment
Hello, you have not logged in, please log in
User Login

Forgot password?

No account yet? Register now

Tips
Please speak legally
Your email will be hidden
Please complete all required fields ( denoted with* )
Mark
5.0

You May Also Be Interested In:


SIT8008BI-83-33E-30.000000T

SIT8008BI-83-33E-30.000000T

SiTime

OSC MEMS 30.0000MHZ LVCMOS SMD

In Stock: 94152

Submit RFQ