- Can FTSH-111-04-TM-MT be used to connect two PCBs at a right angle in a compact enclosure?
- FTSH-111-04-TM-MT is a two-row, 22-position, 1.27 mm pitch right-angle header intended for board-to-board or cable connections. The product data does not specify a mated stacking height, so the mating connector, PCB thickness, component clearances, and enclosure geometry should be checked together before finalizing the board layout.
- What PCB footprint and soldering process should I use for FTSH-111-04-TM-MT?
- FTSH-111-04-TM-MT uses a right-angle surface-mount mounting style with solder termination. The land pattern should be taken from the Samtec recommended footprint or the applicable mechanical drawing rather than inferred only from the 1.27 mm pitch. Check pad dimensions, solder fillets, component keep-outs, paste coverage, and the connector body orientation for the selected assembly process.
- Can FTSH-111-04-TM-MT carry 3.3 V or 5 V digital signals?
- FTSH-111-04-TM-MT has a listed current rating of 3.4 A per contact, but no voltage rating is provided in the supplied data. A 3.3 V or 5 V signal may be electrically suitable depending on creepage, clearance, insulation requirements, signal speed, and the mating connector, but the circuit should use the manufacturer’s voltage and electrical-performance specifications before release.
- Is FTSH-111-04-TM-MT suitable for high-speed differential signals such as LVDS, USB, or PCIe?
- FTSH-111-04-TM-MT provides a compact two-row contact arrangement, but the supplied information does not define impedance, insertion loss, return loss, crosstalk, or propagation characteristics. It can be evaluated for lower-speed or less demanding differential links, while USB, PCIe, and other high-speed interfaces require Samtec signal-integrity data, controlled routing, short launches, matched pairs, and validation on the complete connector-and-cable assembly.
- What mating connector should be selected for FTSH-111-04-TM-MT?
- FTSH-111-04-TM-MT is an unshrouded male-pin header with a 1.27 mm mating pitch and two rows spaced 1.27 mm apart. The mating part must provide compatible female contacts, the required contact length, the intended board or cable termination, and a matching mechanical orientation. Push-pull engagement does not provide the keyed or polarized guidance associated with a shrouded header, so assembly orientation should be controlled by the system design.
- Does FTSH-111-04-TM-MT provide protection against reversed or offset mating?
- FTSH-111-04-TM-MT is specified as unshrouded, so it does not inherently provide the full mechanical keying and pin-protection features of a shrouded connector. For assemblies that can be inserted incorrectly, use a compatible keyed mating system, add an external guide or housing, and include pin-1 marking and assembly controls.
- Can FTSH-111-04-TM-MT be used for repeated service disconnects?
- FTSH-111-04-TM-MT uses tin-finished phosphor-bronze contacts and a push-pull fastening style. Repeated mating cycles can increase contact wear and affect the tin interface, particularly with vibration, contamination, or off-axis insertion. The expected service cycle count should be compared with Samtec qualification data, and a locking or more cycle-rated connector family may be preferable for frequent field replacement.
- Is FTSH-111-04-TM-MT a suitable replacement for a 2.54 mm or 2.00 mm pitch header?
- FTSH-111-04-TM-MT cannot be a direct footprint replacement for a 2.54 mm or 2.00 mm header because it uses a 1.27 mm pitch in both rows. Migration requires a new PCB footprint, review of pin numbering and row orientation, confirmation of the mating connector, and mechanical clearance checks. Its smaller pitch can reduce board area but leaves less room for probing, hand soldering, and routing escape.
- Can FTSH-111-04-TM-MT replace a Samtec FTSH header with a different position count?
- FTSH-111-04-TM-MT has 22 loaded positions arranged in two rows, while another FTSH variant may have a different length or position count. Replacement requires matching the number of contacts, body length, pin numbering, contact orientation, mating interface, and PCB land pattern. A cuttable header may offer length flexibility, but the resulting cut edge and assembly process must remain compatible with the application.
- How does FTSH-111-04-TM-MT compare with a shrouded Samtec header for an industrial control board?
- FTSH-111-04-TM-MT is unshrouded, which supports a low-profile and accessible pin arrangement but provides less protection against bent pins, cable misalignment, and reversed insertion than a shrouded alternative. A shrouded Samtec header may better suit keyed cable assemblies and repeated technician servicing, whereas FTSH-111-04-TM-MT can fit applications with controlled assembly access and external orientation features.
- Can the 3.4 A per contact rating of FTSH-111-04-TM-MT be applied to all 22 pins simultaneously?
- The 3.4 A figure for FTSH-111-04-TM-MT should not automatically be treated as a 74.8 A connector-level rating. Actual allowable current depends on the number of energized adjacent contacts, PCB copper, solder-joint temperature, ambient temperature, contact resistance, and thermal conditions inside the enclosure. Use the manufacturer’s derating curves and validate the temperature rise for the intended current distribution.
- Is FTSH-111-04-TM-MT suitable for industrial equipment operating from -55°C to 125°C?
- FTSH-111-04-TM-MT is specified for an operating temperature range of -55°C to 125°C, uses LCP insulation with a UL94 V-0 flammability rating, and has phosphor-bronze contacts. The complete assembly still requires evaluation of solder-joint fatigue, PCB expansion, mating materials, vibration, condensation, and temperature cycling because the connector rating does not define the limits of the surrounding board or cable system.
- What should be checked when using FTSH-111-04-TM-MT in a high-vibration application?
- FTSH-111-04-TM-MT uses push-pull fastening and an unshrouded interface. In a vibrating assembly, verify that the mating connector cannot lift or shift, provide suitable cable strain relief, and inspect solder-joint stress caused by the right-angle cable or board connection. A positive locking mating system or additional mechanical support may be needed when vibration exceeds the connector’s qualification conditions.
- Does FTSH-111-04-TM-MT require special moisture handling before reflow?
- FTSH-111-04-TM-MT is listed as Moisture Sensitivity Level 1, which permits unlimited floor life under the applicable storage conditions. The connector should still be stored and assembled according to Samtec and the assembly house requirements, with attention to packaging damage, contamination, solder paste condition, peak reflow temperature, and the thermal limits of the LCP insulator.
- Can FTSH-111-04-TM-MT be used in a cable assembly without an additional housing?
- FTSH-111-04-TM-MT is described as a header suitable for board-to-board or cable use, but it is unshrouded and does not include a protective housing in the supplied details. A cable assembly should therefore use a compatible female connector or contact system that controls alignment and strain. For exposed or frequently handled cables, an additional housing, latch, guide, or strain-relief feature may be required.
- Is FTSH-111-04-TM-MT appropriate for power distribution between boards?
- FTSH-111-04-TM-MT can be considered for board-to-board power when the current per contact, contact grouping, voltage clearance, thermal rise, and mating-cycle requirements fit the application. Its unspecified voltage rating and compact 1.27 mm geometry require electrical verification before use on higher-voltage rails. Power and ground contacts should be allocated to limit voltage drop and distribute heat across the connector.
- What contact-finish issue should be considered when replacing a gold-plated connector with FTSH-111-04-TM-MT?
- FTSH-111-04-TM-MT has tin contact finishes on both the mating and post sections. Tin interfaces can have different insertion-force, wear, fretting, and low-level-signal behavior from gold-plated contacts, especially under vibration or repeated cycling. When replacing a gold-plated header, verify mating compatibility, contact normal force, environmental exposure, and the minimum signal level supported by the complete connector pair.
- Is FTSH-111-04-TM-MT suitable for a RoHS-compliant product shipped internationally?
- FTSH-111-04-TM-MT is listed as RoHS3 compliant and has an ECCN classification of EAR99 in the supplied product data. The final product still requires its own material declarations, regional substance restrictions, customs classification review, and documentation for the assembled equipment. Compliance should be confirmed against the current Samtec documentation and the destination-market requirements.




