The Samsung Electro-Mechanics RC6432F7872CS is a surface-mount thick film chip resistor engineered for power applications requiring stable 78.7 kΩ resistance in thermally demanding environments. Manufactured in the 2512 (6432 metric) package format with physical dimensions of 6.30 mm × 3.20 mm × 0.66 mm, this component delivers 1W continuous power dissipation while maintaining ±1% resistance tolerance across its full operating temperature range of -55°C to 155°C.
The thick film construction incorporates moisture-resistant passivation, allowing the resistor to maintain stable electrical performance in humid or condensing environments where standard film resistors may drift or degrade. This moisture resistance, combined with a temperature coefficient of ±100 ppm/°C, positions the RC6432F7872CS for automotive electronics, industrial control systems, and outdoor equipment where environmental exposure cannot be fully controlled. The component meets MSL 1 classification, requiring no special dry-packing or floor-life management during assembly operations.
At 78.7 kΩ, this resistor value sits in a range commonly selected for voltage dividers in high-impedance analog inputs, bias networks for operational amplifiers, and pull-up or pull-down networks in digital interfaces operating at moderate currents. The 1W power rating provides thermal margin for circuits where transient power surges or continuous bias currents would exceed the capability of 0.5W resistors in smaller 1206 or 2010 packages. The 2512 footprint offers a practical balance between board area and thermal performance, with sufficient pad separation to support automated pick-and-place assembly while enabling adequate copper thermal relief to the surrounding PCB.
The ±1% tolerance allows direct use in precision voltage dividers and feedback networks without the need for factory trimming or hand-selection. In applications such as switched-mode power supply feedback paths, battery management sensing resistors, or multi-stage filter networks, this tolerance level reduces circuit variance and simplifies design margin analysis. The two-terminal configuration simplifies PCB routing and maintains predictable parasitic inductance, a consideration in high-frequency signal conditioning or pulse circuits where lead inductance can introduce unwanted phase shift or ringing.
Samsung Electro-Mechanics maintains active production status for the RC series, and the component carries RoHS 3 compliance along with REACH-unaffected material declarations, supporting integration into commercial and industrial products bound for global markets. The ECCN classification of EAR99 and HTSUS code 8533.21.0030 facilitate customs documentation and export control screening for international shipments. Alternative devices such as the Stackpole
RMCF2512FT78K7
and Vishay
RMCF2512FT78K7
Stackpole Electronics, Inc.
RES 78.7K OHM 1% 1W 2512
2000000
CRCW251278K7FKEG
offer functional equivalence for second-source or cost-optimization evaluations during the design phase.
CRCW251278K7FKEG
Vishay Dale
RES SMD 78.7K OHM 1% 1W 2512
2000000
RC6432F7872CS (1)
Replacing Samsung Electro-Mechanics RC6432F7872CS 78.7 kOhm 2512 Resistors Without Creating Fit or Performance Risk
When RC6432F7872CS from Samsung Electro-Mechanics is unavailable, delayed, or being reviewed for second-source approval, the replacement decision should go beyond matching “78.7 kOhm, 1%, 2512.” A suitable equivalent resistor must also align with power dissipation, temperature coefficient, pad geometry, thick-film behavior, moisture exposure, derating margin, and assembly compatibility.
The closest candidate replacement part numbers for RC6432F7872CS are:
-
RMCF2512FT78K7from Stackpole Electronics
RMCF2512FT78K7
Stackpole Electronics, Inc.
RES 78.7K OHM 1% 1W 2512
2000000
-
CRCW251278K7FKEGfrom Vishay Dale
CRCW251278K7FKEG
Vishay Dale
RES SMD 78.7K OHM 1% 1W 2512
2000000
Both alternatives are 78.7 kOhm, ±1% thick-film chip resistors in the 2512 package class, making them practical options for many designs using the Samsung RC6432F7872CS. However, the best choice depends on whether the circuit is limited by thermal load, environmental exposure, qualification history, solder pad layout, sourcing policy, or long-term stability expectations.
What the Samsung Electro-Mechanics RC6432F7872CS Defines in the Original Design
The Samsung Electro-Mechanics RC6432F7872CS is a 78.7 kOhm ±1% thick-film chip resistor rated for 1 W in a 2512 package, also known as 6432 metric. Its nominal body size is approximately 6.30 mm x 3.20 mm, with a seated height up to about 0.66 mm. It uses two terminals and is intended for standard surface-mount assembly.
Key characteristics influencing replacement selection include:
| Parameter | Samsung Electro-Mechanics RC6432F7872CS | Replacement relevance |
|---|---|---|
| Resistance | 78.7 kOhm | Must match exactly unless circuit tolerance analysis permits deviation |
| Tolerance | ±1% | A replacement should normally remain ±1% to preserve voltage divider, feedback, bias, and sensing accuracy |
| Power rating | 1 W | Candidate parts should support equivalent power handling under similar derating conditions |
| Package | 2512 / 6432 metric | Determines PCB land pattern compatibility and thermal dissipation area |
| Composition | Thick film | Affects noise, pulse behavior, voltage coefficient, and cost compared with thin-film options |
| Temperature coefficient | ±100 ppm/°C | Replacement should be reviewed if the circuit operates across wide temperature swings |
| Operating temperature | -55°C to +155°C | Suitable for industrial, power, and harsh-environment applications |
| Feature | Moisture resistant | Relevant for outdoor, high-humidity, or condensation-prone assemblies |
| Compliance | RoHS3, REACH unaffected, MSL 1 | Supports standard lead-free assembly and long floor-life handling |
In practice, RC6432F7872CS is likely used where a relatively high resistance value must handle more power than smaller 0805, 1206, or 2010 resistors can safely dissipate. Typical applications include power supply feedback networks, bleeder paths, discharge circuits, industrial control boards, metering circuits, battery-powered equipment, LED driver control networks, and high-voltage divider sections where PCB spacing and resistor voltage ratings are also reviewed.
For replacement evaluation, the 1 W rating and 2512 footprint carry as much weight as the resistance value. A 78.7 kOhm ±1% resistor in a smaller package may be electrically correct at room temperature but unsuitable if it runs hotter, exceeds voltage stress limits, or changes the board’s thermal behavior. The moisture-resistant feature of the Samsung part should also be considered when the product operates in humid environments or must pass extended reliability testing.
Candidate Equivalent Parts for RC6432F7872CS: RMCF2512FT78K7 and CRCW251278K7FKEG
RMCF2512FT78K7
and
RMCF2512FT78K7
Stackpole Electronics, Inc.
RES 78.7K OHM 1% 1W 2512
2000000
CRCW251278K7FKEG
are both practical replacement candidates because they match the core electrical profile of Samsung Electro-Mechanics RC6432F7872CS: 78.7 kOhm resistance, ±1% tolerance, thick-film construction, and 2512 surface-mount package. The main evaluation points are manufacturer qualification, environmental feature differences, derating behavior, and purchasing availability.
CRCW251278K7FKEG
Vishay Dale
RES SMD 78.7K OHM 1% 1W 2512
2000000
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Stackpole Electronics |
| 78.7 kOhm, ±1%, 2512 chip resistor, thick film, commonly rated around 1 W, ±100 ppm/°C class depending on series configuration | General-purpose thick-film SMD resistor; broad value availability; compatible with standard reflow assembly | Power supply feedback, bias networks, voltage dividers, general industrial electronics, control boards | Matches RC6432F7872CS in resistance, tolerance, package size, and thick-film technology; suitable where standard 2512 performance is acceptable | Moisture-resistant performance should be verified against the exact Stackpole datasheet and project requirements; manufacturer qualification may differ from Samsung | Good first-choice equivalent when the design needs a direct 2512 78.7 kOhm 1% thick-film replacement with broad sourcing flexibility |
| Vishay Dale |
| 78.7 kOhm, ±1%, 2512 thick-film chip resistor, typically 1 W class, ±100 ppm/°C code, -55°C to +155°C operating range | Established CRCW thick-film platform; stable general-purpose resistor family; suitable for automated placement | Industrial controls, power electronics support circuits, measurement interfaces, consumer and communication equipment | Matches the main electrical and mechanical requirements of RC6432F7872CS and is widely used as a 2512 thick-film equivalent | Moisture-resistance designation may not be identical to Samsung RC6432F7872CS; confirm voltage rating, derating curve, and packaging code before approval | Strong replacement option where Vishay qualification, supply chain preference, or existing AVL usage supports the substitution |
RMCF2512FT78K7
is generally attractive when a design requires a straightforward 2512 resistor equivalent and the qualification process emphasizes resistance value, tolerance, power class, and footprint compatibility. It should be checked carefully for the exact power rating at ambient temperature, derating curve above 70°C, and any humidity-related test data required by the final product environment.
RMCF2512FT78K7
Stackpole Electronics, Inc.
RES 78.7K OHM 1% 1W 2512
2000000
CRCW251278K7FKEG
is a strong option where a Vishay CRCW family resistor is already accepted in the bill of materials or preferred by purchasing. Its engineering fit is close for many RC6432F7872CS replacement scenarios, but the same checks apply: rated voltage, overload behavior, solderability, thermal derating, and humidity exposure should be compared against the Samsung Electro-Mechanics original part.
CRCW251278K7FKEG
Vishay Dale
RES SMD 78.7K OHM 1% 1W 2512
2000000
Engineering Trade-Offs When Comparing RC6432F7872CS Replacement Options
Selecting between Samsung Electro-Mechanics RC6432F7872CS, Stackpole
RMCF2512FT78K7
, and Vishay Dale
RMCF2512FT78K7
Stackpole Electronics, Inc.
RES 78.7K OHM 1% 1W 2512
2000000
CRCW251278K7FKEG
is usually a matter of application risk rather than basic value matching. All three parts target the same 78.7 kOhm ±1% 2512 thick-film resistor requirement, but project-specific constraints determine which substitute is most appropriate.
CRCW251278K7FKEG
Vishay Dale
RES SMD 78.7K OHM 1% 1W 2512
2000000
| Decision factor | RC6432F7872CS Samsung Electro-Mechanics | RMCF2512FT78K7 Stackpole Electronics | CRCW251278K7FKEG Vishay Dale | Engineering interpretation |
|---|---|---|---|---|
| Electrical compatibility | Original 78.7 kOhm ±1%, 1 W, ±100 ppm/°C thick-film part | Close electrical match for resistance, tolerance, package, and power class | Close electrical match for resistance, tolerance, package, and TCR code | Both alternatives are suitable candidates if datasheet voltage rating and derating curves meet the circuit stress profile |
| Mechanical compatibility | 2512 / 6432 metric, 6.30 mm x 3.20 mm nominal body | 2512 SMD package | 2512 SMD package | PCB footprint compatibility is expected, but land pattern, terminal style, and height should be checked before production release |
| Thermal behavior | 1 W rating in large chip format supports higher dissipation than smaller packages | Comparable 2512 thermal class, subject to Stackpole derating rules | Comparable 2512 thermal class, subject to Vishay derating rules | If the resistor dissipates significant power, compare power derating above 70°C and copper area assumptions |
| Moisture and environmental fit | Moisture-resistant feature specified | General-purpose thick-film behavior; humidity rating should be confirmed | General-purpose CRCW thick-film behavior; humidity rating should be confirmed | For humid or outdoor products, environmental test equivalence may decide whether the substitute is acceptable |
| Performance stability | ±100 ppm/°C TCR supports moderate precision across temperature | Similar TCR class when ordered in the FT configuration | Similar TCR code in the FKEG configuration | Temperature drift should be reviewed in precision divider, sensing, or feedback circuits |
| Reliability and qualification | Original approved Samsung Electro-Mechanics RC series component | Requires Stackpole approval if not already on AVL | Requires Vishay approval if not already on AVL | Existing approved vendor lists may reduce qualification effort |
| Package availability and sourcing | Inventory may vary by distributor and production cycle | Often useful as a second-source option | Often useful where Vishay CRCW parts are already stocked | Availability, packaging format, and lead time can influence the practical replacement choice |
| Cost considerations | Baseline cost depends on sourcing channel | May be cost-effective for standard thick-film requirements | May carry different pricing depending on volume and supply channel | Compare total landed cost, not only unit price, especially for urgent shortage substitutions |
| Best-fit scenario | Use when original part is available and already qualified | Use when a direct general-purpose 2512 78.7 kOhm replacement is needed | Use when Vishay CRCW qualification or supply preference is beneficial | The preferred substitute depends on qualification history, environment, and procurement constraints |
| Limitations | Availability or lead-time risk may trigger replacement search | Moisture-resistant equivalence must be verified | Moisture-resistant equivalence must be verified | Neither substitute should be approved solely by matching resistance and package |
For low-stress divider or bias circuits,
RMCF2512FT78K7
and
RMCF2512FT78K7
Stackpole Electronics, Inc.
RES 78.7K OHM 1% 1W 2512
2000000
CRCW251278K7FKEG
are both practical alternatives to RC6432F7872CS when the PCB footprint and soldering process are unchanged. In higher-dissipation applications, the comparison should include actual resistor power loss, maximum ambient temperature, copper area, airflow, and temperature rise during operation. For humid environments, the Samsung RC6432F7872CS moisture-resistant feature should be matched against the humidity load-life and environmental test data of the replacement candidate.
CRCW251278K7FKEG
Vishay Dale
RES SMD 78.7K OHM 1% 1W 2512
2000000
If the design uses RC6432F7872CS in a feedback network, the ±1% tolerance and ±100 ppm/°C temperature coefficient are usually the governing parameters. If it is used as a bleeder, discharge, or load resistor, power derating and voltage rating may become the primary filters. If it sits in a high-impedance measurement path, long-term drift, noise, contamination resistance, and board cleanliness may also affect replacement approval.
For quotations and sourcing support for RC6432F7872CS,
RMCF2512FT78K7
,
RMCF2512FT78K7
Stackpole Electronics, Inc.
RES 78.7K OHM 1% 1W 2512
2000000
CRCW251278K7FKEG
, or other 78.7 kOhm 2512 resistor replacement parts, obtain pricing and availability through IC-Components.com or email Info@IC-Components.com.
CRCW251278K7FKEG
Vishay Dale
RES SMD 78.7K OHM 1% 1W 2512
2000000




