The 4FW216 from ST is a semiconductor component housed in an industry-standard SOP-8 package, offering a compact surface-mount footprint suitable for density-sensitive circuit designs. The eight-pin small-outline package provides adequate lead count for configurations commonly found in interface circuits, voltage regulation stages, analog signal conditioning, and discrete logic functions, with a pin pitch and body width that align with automated assembly processes across consumer, industrial, and communications equipment.
SOP-8 packaging delivers a balance between board space efficiency and thermal performance. The gull-wing lead geometry ensures reliable solder joint formation during reflow soldering, while the molded plastic body offers mechanical protection and moisture resistance when handled according to standard IPC guidelines. Lead spacing and standoff height are consistent with high-volume PCB assembly, making the 4FW216 compatible with pick-and-place equipment and optical inspection systems used in contract manufacturing environments.
ST's active production status for the 4FW216 indicates ongoing support for designs where long-term availability and supply chain continuity matter. Active-status components reduce the risk of redesign cycles triggered by obsolescence, a consideration for products with multi-year lifecycles or where qualification testing and regulatory certification represent significant engineering overhead. The device is supplied as new original stock, meeting traceability and authenticity requirements in sectors where counterfeit risk mitigation and quality assurance protocols are part of the procurement workflow.
The SOP-8 form factor supports a range of functional blocks depending on the internal die architecture. Common implementations include dual operational amplifiers, comparators, voltage references, low-dropout regulators, gate drivers, and specialized analog switches. The pinout allows for symmetrical or asymmetric signal routing, power supply decoupling close to the die, and thermal vias beneath the package body when additional heat dissipation is required. Lead-to-lead spacing also accommodates high-voltage isolation in applications where primary and secondary circuits must remain galvanically separated, though specific isolation ratings depend on the internal construction and datasheet limits.
From a design integration perspective, the 4FW216's SOP-8 package is compatible with standard footprint libraries in major EDA tools, reducing layout iteration time. The low profile of the package suits applications with height constraints, such as slim power adapters, portable instrumentation, and embedded modules installed in tight enclosures. The exposed leads simplify manual rework and diagnostic probing during prototype bring-up, a practical advantage in early-stage development or field service scenarios.
ST's manufacturing infrastructure supports consistent parametric yields and batch-to-batch repeatability, which matters when scaling from pilot builds to full production. The 4FW216 can be incorporated into designs that require cost-effective solutions without compromising on process maturity or component-level reliability. Whether used in signal path conditioning, power management subsystems, or control interface circuits, the device provides a proven package platform backed by an established semiconductor supplier.
Replacing ST 4FW216 SOP-8 Devices When the Original Marking Is the Starting Point
A search for an ST 4FW216 replacement usually begins when a board-level repair, redesign, or procurement task depends on a small SOP-8 device identified mainly by its package marking. The challenge is that “4FW216” is commonly treated as a top-side marking or inventory identifier rather than a complete orderable ST part number. Before selecting an equivalent component, the device function, pinout, voltage range, memory density, and interface behavior should be confirmed from the circuit.
Based on the ST SOP-8 marking context, the closest engineering interpretation is an ST 4-Kbit I2C serial EEPROM family device, commonly associated with the
M24C04
series. Suitable replacement candidates to evaluate include:
M24C04
ST
M24C04 ST SOP8
2000000
- ST
M24C04-FMN6TP
M24C04
ST
M24C04 ST SOP8
2000000
- ST
M24C04-WMN6TP
M24C04
ST
M24C04 ST SOP8
2000000
- Microchip
24AA04-I/SN
24AA04-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
49259
- Microchip
24LC04B-I/SN
24LC04B-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
4840
- onsemi
CAT24C04YI-GT3
CAT24C04YI-GT3
onsemi
IC EEPROM 4KBIT I2C 8TSSOP
74300
- ROHM BR24G04FJ-3GE2
These parts should not be selected only by matching package size. A valid ST 4FW216 equivalent must match the electrical interface, I2C address behavior, write-protect function, supply voltage, EEPROM organization, endurance, retention, and SOP-8 / SOIC-8 board footprint.
Understanding the ST 4FW216 SOP-8 Before Selecting an Equivalent EEPROM
The ST 4FW216 device listed as “ST SOP-8” provides limited distributor-side information, so replacement evaluation should start from the characteristics that can be verified on the board. If the device is confirmed as an ST
M24C04
-family serial EEPROM, the expected profile is a 4-Kbit non-volatile memory using an I2C-compatible two-wire interface in an 8-pin small-outline package.
M24C04
ST
M24C04 ST SOP8
2000000
Typical characteristics to verify include:
| Parameter | Expected Engineering Relevance |
|---|---|
| Manufacturer | ST; replacement preference may favor ST
M24C04
ST
M24C04 ST SOP8
2000000
|
| Package / Case | SOP-8; footprint compatibility must be checked against SOIC-8 body width, lead pitch, and land pattern |
| Memory Type | Serial EEPROM; replacement must preserve non-volatile data storage behavior |
| Likely Density | 4 Kbit; using a smaller memory will fail, while larger memory may require address compatibility review |
| Interface | I2C two-wire bus; SDA, SCL, pull-up voltage, bus speed, and addressing must match the original circuit |
| Supply Voltage | Depends on exact ST variant; common replacements support either wide-range 1.7 V to 5.5 V or 2.5 V to 5.5 V operation |
| Write Protect Pin | Must behave consistently with the original device, especially in calibration or configuration storage circuits |
| Endurance / Retention | Usually specified by EEPROM family; relevant for systems with frequent parameter updates |
| Product Status | Active listing; direct ST replacement may still be possible depending on distributor availability |
Main product features that affect replacement choice include byte and page write capability, I2C acknowledge polling after write cycles, hardware write protection, and standard 8-pin serial EEPROM pinout. In practice, these details influence whether a substitute works transparently with existing firmware. For example, if the firmware uses page writes, the replacement must support compatible page size and write-cycle timing. If the write-protect pin is tied high or low on the PCB, the substitute must interpret that pin in the same way.
Typical application scenarios include configuration memory, identification data storage, calibration constants, small boot parameters, industrial control settings, consumer electronics profiles, and board serialization. In these uses, replacement suitability is not determined by memory density alone. The device must tolerate the system voltage, preserve stored data over the required lifetime, and respond correctly to the I2C address expected by the controller.
Candidate ST 4FW216 Replacement Parts and Engineering Fit
The following table compares practical replacement candidates for an ST 4FW216 SOP-8 device when the board analysis confirms a 4-Kbit I2C EEPROM function. Final selection should be based on the exact circuit voltage, firmware addressing method, and mechanical footprint.
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| ST |
M24C04
ST
M24C04 ST SOP8
2000000
| 4-Kbit I2C serial EEPROM, SO-8/SOP-8 class package, wide operating voltage family, non-volatile memory | ST EEPROM architecture, I2C-compatible interface, write-protect pin, page write support | Configuration storage, calibration data, product ID memory, industrial and consumer boards | Closest ST-family candidate when 4FW216 corresponds to an ST
M24C04
ST
M24C04 ST SOP8
2000000
| Exact top marking and order code should be verified; supply-voltage suffix and temperature grade must match the system | Preferred first-choice equivalent when maintaining ST behavior, qualification history, and firmware compatibility matters |
| ST |
M24C04
ST
M24C04 ST SOP8
2000000
| 4-Kbit I2C serial EEPROM, SO-8 package, standard ST
M24C04
ST
M24C04 ST SOP8
2000000
| I2C bus operation, EEPROM retention, hardware write protection, page write capability | Legacy boards, 3.3 V or 5 V configuration memory, replacement of older ST serial EEPROMs | Same manufacturer and same memory-density family make it a strong direct replacement candidate | Voltage range may differ from F-version parts; not ideal if the circuit operates below the supported minimum voltage | Suitable for 3.3 V / 5 V systems where the original device is confirmed as an
M24C04
ST
M24C04 ST SOP8
2000000
|
| Microchip |
| 4-Kbit I2C serial EEPROM, SOIC-8, low-voltage operation family | Low-voltage EEPROM, standard two-wire serial interface, write protection, industrial temperature option | Battery-powered products, low-voltage control boards, portable electronics | Can replace the original when voltage operation and I2C addressing are compatible | Electrical timing, page size, and address-control behavior must be reviewed against ST firmware expectations | Good option when the board uses low-voltage rails and ST supply is constrained |
| Microchip |
| 4-Kbit I2C serial EEPROM, SOIC-8, common 2.5 V to 5.5 V class operation | Mature Microchip EEPROM family, broad availability, I2C-compatible interface, write protection | 3.3 V and 5 V embedded systems, consumer electronics, service replacement | Matches the likely density, package class, and I2C EEPROM function | Not an ST device; firmware edge cases such as page write timing and address mapping should be checked | Practical cross-source alternative for 3.3 V / 5 V designs needing stable availability |
| onsemi |
| 4-Kbit I2C CMOS serial EEPROM, SOIC-8, industrial-grade options | Low-power operation, hardware write protect, I2C-compatible protocol, tape-and-reel availability | Industrial controls, metering, communications equipment, control modules | Functionally aligned with 4-Kbit I2C EEPROM replacement requirements | Package suffix and reel format must match assembly needs; verify VCC range and write-cycle timing | Suitable for production substitution where onsemi sourcing is preferred |
| ROHM | BR24G04FJ-3GE2 | 4-Kbit I2C bus EEPROM, SOP-J/SOIC-style 8-pin package depending on suffix | ROHM serial EEPROM family, low-power operation, write protection, automotive/industrial variants available in related series | Equipment settings, factory data storage, compact electronic modules | Can serve as a functional alternative if pinout, package footprint, and I2C protocol details match | Mechanical package dimensions may differ from standard narrow SOIC-8; land-pattern review is needed | Best considered when electrical compatibility is acceptable and PCB footprint has been confirmed |
Among these candidates, ST
M24C04
-FMN6TP and ST
M24C04
ST
M24C04 ST SOP8
2000000
M24C04
-WMN6TP are the most natural starting points for an ST 4FW216 equivalent part search because they preserve manufacturer continuity and likely EEPROM family behavior. Microchip
M24C04
ST
M24C04 ST SOP8
2000000
24AA04-I/SN
and
24AA04-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
49259
24LC04B-I/SN
are strong alternatives when availability, voltage range, or sourcing policy favors Microchip. onsemi
24LC04B-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
4840
CAT24C04YI-GT3
and ROHM BR24G04FJ-3GE2 are useful second-source options, but package and timing verification should be included in the approval workflow.
CAT24C04YI-GT3
onsemi
IC EEPROM 4KBIT I2C 8TSSOP
74300
Comparing ST 4FW216 Equivalent Options for Real-World Replacement Decisions
A replacement part should be evaluated by how it behaves in the installed circuit, not only by whether it has the same memory size. The table below focuses on practical trade-offs among the ST 4FW216 replacement candidates.
| Replacement Part | Electrical Compatibility | Mechanical Compatibility | Performance Differences | Reliability Considerations | Package / Availability | Cost Considerations | Suitable Application Scenarios | Advantages | Limitations |
|---|---|---|---|---|---|---|---|---|---|
| ST M24C04-FMN6TP | Strong match if the original is an ST
M24C04
ST
M24C04 ST SOP8
2000000
| SO-8/SOP-8 class fit is usually favorable, but exact land pattern should be checked | Similar ST write-cycle and I2C behavior reduce firmware risk | ST endurance and retention specifications align with
M24C04
ST
M24C04 ST SOP8
2000000
| Often suitable for direct sourcing when available | May cost more than broader second-source options depending on supply | Low-voltage, 3.3 V, and mixed-voltage boards needing close ST continuity | Best overall ST-family replacement candidate | Exact marking correlation with 4FW216 must be confirmed |
| ST M24C04-WMN6TP | Good for 3.3 V / 5 V systems; less suitable if the board runs at lower voltage | High likelihood of SOP-8 footprint compatibility | Similar protocol behavior to original ST EEPROM family | Same manufacturer family supports predictable qualification | Availability depends on specific suffix and reel format | Usually competitive when ST stock is available | Legacy ST EEPROM replacement, industrial boards, consumer control boards | Maintains ST manufacturer consistency | Voltage range may not match lower-voltage designs |
| Microchip 24AA04-I/SN | Good for low-voltage systems if address and timing behavior match | SOIC-8 package may fit many SOP-8 footprints, but body width should be reviewed | Timing and page-write details may vary from ST parts | Microchip EEPROMs are widely used and well documented | Broad market availability | Often attractive for volume procurement | Battery-powered or low-voltage embedded designs | Good low-voltage alternative | Requires firmware and write-cycle compatibility review |
| Microchip 24LC04B-I/SN | Strong for 2.5 V to 5.5 V class applications | Standard SOIC-8 footprint generally practical | Mature I2C EEPROM behavior, but not identical to ST implementation in every timing detail | Stable product family with common industrial options | Broadly available through many channels | Frequently cost-effective | 3.3 V and 5 V configuration-memory applications | Strong sourcing flexibility | Less suitable for circuits below its supported voltage range |
| onsemi CAT24C04YI-GT3 | Good functional match when VCC range and I2C address mapping align | SOIC-8 package should be verified against PCB pads | Comparable EEPROM function; write timing should be checked | Industrial-grade options support controlled environments | Tape-and-reel supply may suit production | Competitive depending on region and stock | Industrial control, metering, communication modules | Good second-source production option | Requires validation of package suffix and bus timing |
| ROHM BR24G04FJ-3GE2 | Functionally compatible if I2C protocol, voltage, and write-protect behavior match | Package style may differ more than other candidates; footprint review is recommended | EEPROM behavior is similar but should be validated for page writes and acknowledge polling | ROHM EEPROM families are suitable for long-life equipment when correctly specified | Availability depends on suffix and regional stock | May vary by supply channel | Compact modules, control boards, equipment setting storage | Useful when ROHM sourcing or qualification exists | Mechanical compatibility needs closer review |
For the lowest-risk replacement path, start with ST
M24C04
-FMN6TP or ST
M24C04
ST
M24C04 ST SOP8
2000000
M24C04
-WMN6TP after confirming that ST 4FW216 is an
M24C04
ST
M24C04 ST SOP8
2000000
M24C04
-family EEPROM on the board. If the priority is alternate sourcing, Microchip
M24C04
ST
M24C04 ST SOP8
2000000
24LC04B-I/SN
is usually a practical option for 3.3 V and 5 V systems, while Microchip
24LC04B-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
4840
24AA04-I/SN
is better suited where low-voltage operation is required. onsemi
24AA04-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
49259
CAT24C04YI-GT3
provides a balanced second-source path for production environments, and ROHM BR24G04FJ-3GE2 can be considered when its package dimensions and electrical behavior are validated.
CAT24C04YI-GT3
onsemi
IC EEPROM 4KBIT I2C 8TSSOP
74300
Before approval, compare the original and replacement devices at schematic, layout, firmware, and operating-condition levels. Check VCC range, SDA/SCL pull-up voltage, I2C address usage, write-protect pin state, page-write behavior, memory map assumptions, temperature grade, and SOP-8 footprint dimensions. For repaired boards, reading the original EEPROM contents before removal may also be necessary because the replacement component will not contain the stored configuration data.
For quotations and sourcing support for ST 4FW216 replacement parts, ST
M24C04
-FMN6TP, ST
M24C04
ST
M24C04 ST SOP8
2000000
M24C04
-WMN6TP, Microchip
M24C04
ST
M24C04 ST SOP8
2000000
24AA04-I/SN
, Microchip
24AA04-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
49259
24LC04B-I/SN
, onsemi
24LC04B-I/SN
Microchip Technology
IC EEPROM 4KBIT I2C 400KHZ 8SOIC
4840
CAT24C04YI-GT3
, or ROHM BR24G04FJ-3GE2, obtain pricing through IC-Components.com or email Info@IC-Components.com.
CAT24C04YI-GT3
onsemi
IC EEPROM 4KBIT I2C 8TSSOP
74300



