The Knowles Syfer 1812J0630562MXT is a surface-mount multilayer ceramic capacitor (MLCC) offering 5600 pF capacitance with a 63V voltage rating in the standard 1812 (4532 metric) package. Designed with X7R dielectric formulation, this general-purpose ceramic capacitor delivers stable performance across a -55°C to 125°C operating temperature range, making it suitable for circuits exposed to moderate thermal variation where Class II dielectric behavior is acceptable.
With physical dimensions of 4.50mm × 3.20mm and a maximum thickness of 2.50mm, the component provides a compact footprint for applications requiring mid-range capacitance values in board-constrained environments. The ±20% tolerance accommodates use in filtering, decoupling, and timing circuits where precision capacitance is not strictly required. The 63V rating offers sufficient headroom for 24V and 48V rail applications common in industrial control systems, automotive electronics, and power supply output stages.
The X7R temperature coefficient indicates capacitance drift of approximately ±15% across the full operating temperature span, balancing volumetric efficiency with acceptable temperature stability for AC coupling, bypass networks, and energy storage in switched-mode converters. This dielectric class sits between the tighter but lower-capacitance C0G/NP0 types and the higher-capacitance but less stable Y5V options, positioning the 1812J0630562MXT for mainstream board-level integration where moderate performance requirements prevail.
Supplied in tape and reel packaging, the component supports automated pick-and-place assembly workflows. RoHS3 compliance and Moisture Sensitivity Level 1 classification eliminate baking requirements prior to reflow soldering, streamlining production line handling. The active product status from Knowles Syfer ensures ongoing availability for new designs and production ramps, while the REACH unaffected designation simplifies regulatory compliance for distribution within the European market.
1812J0630562MXT (1)
Replacement Planning for Knowles Syfer 1812J0630562MXT 5600 pF 63 V X7R MLCC
When a Knowles Syfer 1812J0630562MXT ceramic capacitor is unavailable, nearing end-of-stock, or being reviewed for cost and sourcing flexibility, the replacement decision should not be based only on matching “5600 pF 63 V X7R 1812.” In real circuit designs, equivalent MLCC selection depends on capacitance tolerance, DC bias behavior, temperature stability, package stress, solder pad compatibility, voltage margin, and supply-chain availability.
The original part is a 5600 pF, ±20%, 63 V, X7R multilayer ceramic capacitor in an 1812 surface-mount package. Suitable replacement candidates may include direct equivalents with the same voltage and tolerance, as well as higher-voltage or tighter-tolerance alternatives when the PCB footprint and electrical behavior remain acceptable.
Potential equivalent and alternative part numbers discussed below include:
- Knowles Syfer 1812J0630562MXT
- TDK C4532X7R1J562M200KA
- Murata GRM43DR71J562KA01L
- KEMET C1812C562M1RAC7800
- Vishay VJ1812Y562MXJAT5Z
- Yageo CC1812MKX7R1J562
These parts should be evaluated as engineering replacement options, not assumed to be automatic drop-in substitutes without checking the latest manufacturer datasheet, termination style, reel packaging, and circuit operating conditions.
What the Knowles Syfer 1812J0630562MXT Defines in the Original Design
The Knowles Syfer 1812J0630562MXT is a general-purpose MLCC specified as 5600 pF with ±20% tolerance, 63 V rated voltage, X7R dielectric, and an 1812 package size measuring approximately 4.50 mm x 3.20 mm with up to 2.50 mm thickness. It is supplied in tape-and-reel packaging and is RoHS3 compliant, with an MSL 1 moisture sensitivity rating.
| Specification | Knowles Syfer 1812J0630562MXT Engineering Relevance | |
|---|---|---|
| Manufacturer | Knowles Syfer | Establishes the original approved source and quality baseline |
| Capacitance | 5600 pF | Determines impedance, filtering frequency, coupling behavior, or timing influence depending on circuit use |
| Tolerance | ±20% | Indicates the circuit likely allows moderate capacitance variation; tighter tolerance replacements are usually acceptable |
| Rated Voltage | 63 V | Replacement should meet or exceed this rating unless actual circuit voltage proves lower with margin |
| Dielectric | X7R | Provides stable behavior from -55°C to +125°C compared with general-purpose Class II dielectrics |
| Package | 1812 / 4532 metric | Affects PCB pad fit, solder joint stress, capacitance availability, and voltage rating options |
| Mounting Type | Surface-mount MLCC | Replacement must match soldering process and land pattern requirements |
| Operating Temperature | -55°C to +125°C | Alternatives should maintain comparable thermal operating range |
| Application Class | General purpose | Allows cross-reference to standard commercial or industrial MLCC series when no safety rating is required |
| Packaging | Tape & Reel | Relevant for automated assembly and production continuity |
The 1812 package is larger than many modern MLCC footprints, which can be beneficial for voltage rating, mechanical robustness, and capacitance stability under DC bias. However, the larger ceramic body may experience board-flex stress in mechanically demanding layouts. A replacement capacitor should therefore be checked not only for capacitance and voltage but also for termination system, chip thickness, and suitability for the PCB’s soldering profile.
The X7R dielectric is suitable for decoupling, bypassing, filtering, snubber support, signal conditioning, and general-purpose capacitance positions where moderate capacitance drift over temperature and voltage is acceptable. If the capacitor is used in a frequency-sensitive filter or timing network, tolerance and DC bias behavior may influence the final circuit response more than the nominal 5600 pF value alone.
Candidate Equivalent and Alternative MLCCs for 1812J0630562MXT Replacement
The following table compares practical replacement candidates for the Knowles Syfer 1812J0630562MXT. Some options are closer electrical matches, while others provide tighter tolerance, higher voltage margin, or broader sourcing flexibility.
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Knowles Syfer | 1812J0630562MXT | 5600 pF, ±20%, 63 V, X7R, 1812, -55°C to +125°C | Original MLCC, tape-and-reel, RoHS3, MSL 1 | General-purpose decoupling, filtering, bypassing, impedance shaping | Baseline component already defined in the original BOM | Availability, lead time, or pricing may drive need for second source | Use when exact original sourcing is available and no BOM change is desired |
| TDK | C4532X7R1J562M200KA | 5600 pF, ±20%, 63 V, X7R, 1812 / 4532 metric | Same nominal capacitance, voltage class, dielectric family, and package size | General decoupling, filtering, industrial electronics, power rail noise suppression | One of the closest like-for-like alternatives because the main electrical class aligns with the original | Mechanical thickness and termination details should be verified against PCB and process limits | Best first-choice cross-reference where a direct 63 V 1812 X7R replacement is required |
| Murata | GRM43DR71J562KA01L | 5600 pF, ±10%, 63 V, X7R, 1812 class | Tighter capacitance tolerance than original, broad MLCC availability | Filtering, coupling, bypassing, noise reduction in temperature-variable environments | Meets capacitance value, voltage rating, dielectric type, and package class while improving tolerance | ±10% tolerance may slightly shift behavior if the circuit was tuned around wide tolerance distribution; verify thickness and land pattern | Suitable when tighter capacitance control is beneficial or acceptable |
| KEMET | C1812C562M1RAC7800 | 5600 pF, ±20%, 100 V, X7R, 1812 | Higher voltage rating, standard commercial MLCC series | Circuits needing extra voltage derating margin, transient-prone rails, general filtering | Capacitance, tolerance, dielectric, and package align; 100 V rating exceeds original 63 V rating | Higher voltage MLCC may have different physical thickness, cost, and DC bias profile | Preferred when voltage headroom or derating margin is desired without changing footprint |
| Vishay | VJ1812Y562MXJAT5Z | 5600 pF, ±20%, 63 V class, X7R family, 1812 | General-purpose MLCC with common 1812 footprint and production packaging options | Decoupling, bypass, analog filtering, general electronic assemblies | Similar capacitance, dielectric class, voltage class, and package size support cross-reference evaluation | Confirm exact suffix for voltage, termination finish, and packaging before production release | Useful as an alternate approved vendor option after datasheet and footprint confirmation |
| Yageo | CC1812MKX7R1J562 | 5600 pF, ±20%, 63 V, X7R, 1812 class | Cost-effective MLCC option with common commodity availability | Consumer, industrial, general-purpose filtering and bypassing | Matches the primary electrical targets of 5600 pF, 63 V, X7R, and 1812 size | Ordering code, reel format, and thickness may vary by suffix; qualification testing is recommended | Suitable for cost-sensitive or multi-source BOM strategies where qualification is available |
Among these candidates, TDK C4532X7R1J562M200KA is the most straightforward technical match because it closely follows the original Knowles Syfer 1812J0630562MXT capacitance, tolerance, voltage, dielectric, and 1812 package class. Murata GRM43DR71J562KA01L offers tighter ±10% tolerance, which can improve capacitance consistency in filtering or impedance-control positions. KEMET C1812C562M1RAC7800 provides higher voltage headroom, making it attractive where voltage derating or transient exposure is a concern.
Vishay VJ1812Y562MXJAT5Z and Yageo CC1812MKX7R1J562 are useful second-source options when supply continuity or cost optimization is part of the replacement decision. For production use, their exact ordering suffixes should be confirmed because MLCC manufacturer codes may define termination finish, packaging quantity, voltage option, and thickness.
Engineering Trade-Off Comparison for 1812J0630562MXT Replacement Selection
Selecting a replacement for Knowles Syfer 1812J0630562MXT should follow the actual circuit function. A decoupling capacitor on a stable low-voltage rail may tolerate a wide range of qualified X7R alternatives. A capacitor in an analog filter, EMI network, or high-impedance signal path may require closer attention to tolerance, capacitance shift, and parasitic behavior.
| Decision Factor | Knowles Syfer 1812J0630562MXT | TDK C4532X7R1J562M200KA | Murata GRM43DR71J562KA01L | KEMET C1812C562M1RAC7800 | Vishay VJ1812Y562MXJAT5Z | Yageo CC1812MKX7R1J562 |
|---|---|---|---|---|---|---|
| Electrical Compatibility | Original 5600 pF, ±20%, 63 V X7R reference | Strong match to original electrical class | Compatible, with tighter ±10% capacitance tolerance | Compatible with higher 100 V rating | Compatible if voltage suffix and dielectric are confirmed | Compatible for standard 63 V X7R replacement use |
| Mechanical Compatibility | 1812 / 4532 metric original footprint | 1812 package supports close PCB fit | 1812 class fit; thickness should be checked | 1812 fit, but higher-voltage body thickness may differ | 1812 footprint; verify exact case height | 1812 footprint; suffix-dependent dimensions should be checked |
| Performance Differences | Baseline Class II MLCC behavior | Similar temperature and voltage behavior expected | Tighter capacitance spread may improve filter repeatability | Higher voltage rating may reduce stress under the same operating voltage | Comparable for general-purpose use after datasheet validation | Suitable for general applications; confirm DC bias curve where capacitance accuracy matters |
| Reliability Considerations | Known original qualification path | Good option for direct second-source qualification | Strong option where stable manufacturing supply is desired | Higher voltage derating can support improved operating margin | Acceptable after vendor qualification and assembly testing | Often attractive for high-volume sourcing, with normal qualification steps |
| Package Availability | Tape & reel original stock dependent | Common MLCC production format | Common global MLCC availability | Common commercial MLCC family | Availability depends on exact suffix and distributor stock | Often available through commodity MLCC channels |
| Cost Considerations | Cost depends on Knowles Syfer availability | Usually competitive as direct equivalent | May cost more than ±20% options depending on market | Higher voltage rating may increase cost | Can be competitive as an alternate source | Often useful for cost-sensitive BOMs |
| Best Application Fit | Existing approved BOM, no redesign | Direct 1812 5600 pF 63 V X7R replacement | Filters or networks benefiting from tighter tolerance | Rails with additional voltage margin or derating preference | Multi-source BOM strategy after validation | High-volume general-purpose replacement after qualification |
| Advantages | No compatibility uncertainty when original is used | Closest overall technical substitute | Better nominal capacitance control | Increased voltage headroom | Expands approved vendor flexibility | Potential sourcing and cost advantages |
| Limitations | May face stock or procurement constraints | Still requires datasheet and PPAP/qualification review where applicable | Tighter tolerance does not eliminate DC bias effects | Possible size, height, or cost differences | Ordering suffix must be verified carefully | Datasheet suffix and production consistency should be reviewed |
For the closest replacement path, TDK C4532X7R1J562M200KA should be evaluated first because it aligns closely with the original Knowles Syfer 1812J0630562MXT. If capacitance tolerance affects circuit repeatability, Murata GRM43DR71J562KA01L is a strong alternative due to its ±10% rating. If the operating environment benefits from voltage derating, KEMET C1812C562M1RAC7800 provides a higher 100 V rating while retaining the same nominal capacitance and 1812 package family.
Vishay VJ1812Y562MXJAT5Z and Yageo CC1812MKX7R1J562 are practical alternatives for second-source approval, cost review, or production continuity, provided the exact suffix, termination, reel format, and mechanical dimensions are checked before release.
Before approving any 1812J0630562MXT equivalent, compare the latest datasheets for capacitance tolerance, voltage rating, dielectric code, operating temperature, package thickness, soldering profile, and DC bias characteristics. For replacement part sourcing and quotations, request pricing and availability through IC-Components.com or contact Info@IC-Components.com.




