The Knowles Syfer 1808Y0500823KDT is a 0.082 µF ceramic capacitor engineered for demanding surface-mount applications where mechanical stress, temperature extremes, and long-term stability intersect. Built on X7R dielectric, this component maintains capacitance stability across a wide temperature range of -55°C to 125°C, making it suitable for automotive, industrial control, and aerospace systems that operate beyond standard commercial temperature windows. The ±10% tolerance and 50V rating position it for DC link filtering, power supply decoupling, and signal conditioning in circuits where moderate voltage headroom and predictable temperature drift are required.
The FlexiCap™ series design incorporates soft termination, a construction approach that uses a flexible conductive polymer layer between the ceramic body and the external solder interface. This reduces the mechanical coupling between the PCB and the brittle ceramic element, lowering the risk of cracking during board flexure events such as assembly handling, panel depaneling, or thermal cycling under operational load. The high-temperature capability extends the operational envelope for circuits exposed to elevated ambient conditions or self-heating from adjacent power semiconductors, while the boardflex-sensitive designation reflects validation for substrates that experience bending or vibration during use.
Dimensionally, the 1808 footprint measures 4.50 mm by 2.00 mm with a maximum thickness of 2.00 mm, offering a balance between volumetric efficiency and power density for mid-size surface-mount designs. The package supports automated pick-and-place processes and is compatible with standard reflow profiles. Moisture Sensitivity Level 1 classification permits unlimited floor life after bag opening, streamlining inventory management and reducing sensitivity to storage conditions. The part is ROHS3 compliant and REACH unaffected, supporting global regulatory requirements without exemption tracking.
X7R dielectric exhibits a capacitance drift of approximately ±15% over the rated temperature range, a tradeoff that delivers moderate volumetric capacitance density while avoiding the steep rolloff characteristic of Y5V or Z5U formulations. This makes the 1808Y0500823KDT appropriate for applications where capacitance stability is more critical than in bulk energy storage but less stringent than in precision timing or measurement circuits. Typical use cases include input and output filtering for switch-mode power supplies, DC bus stabilization in motor drives, and bypass networks for mixed-signal ASICs where supply noise attenuation and transient response matter.
The high-reliability and boardflex-sensitive application tags reflect design validation for environments where component failure modes are constrained by mechanical load paths in addition to electrical stress. This includes handheld instruments, avionics line-replaceable units, and automotive body control modules where solder joint fatigue and ceramic cracking are accelerated failure mechanisms. The soft termination construction mitigates these risks without requiring additional mechanical reinforcement or underfill, reducing assembly complexity while maintaining solder joint integrity under cyclic strain.
At 0.082 µF, the capacitance value sits between the commonly stocked 0.1 µF and 0.047 µF ranges, offering a specific solution for filter networks where standard E12 or E24 series values result in overdesign or insufficient attenuation. The 50V rating provides margin for 24V and 28V nominal supply rails, accommodating transient overvoltage events without derating or requiring series configurations. The active product status and availability of 1147 units in new original stock support both prototyping and volume production without lead-time uncertainty or obsolescence risk.
1808Y0500823KDT (1)
Replacement Planning for Knowles Syfer 1808Y0500823KDT 0.082 µF 50 V X7R 1808 MLCC
Finding an equivalent replacement for the Knowles Syfer 1808Y0500823KDT is not only a matter of matching capacitance and voltage. This part is a 0.082 µF, ±10%, 50 V X7R ceramic capacitor in an 1808 package with FlexiCap™ soft termination, which means board-flex tolerance and mechanical stress behavior are part of the replacement decision.
Potential equivalent or alternative part numbers include:
- KEMET C1808C823K5RACTU
- KEMET C1808C823K5RAC7800
- TDK C4520X7R1H823K200KA
- Murata GRM43DR71H823KA01L
- Vishay VJ1808Y823KXBAT
- KYOCERA AVX 18085C823KAT2A
- Samsung CL43B823KBJNNNE
When replacing the Knowles Syfer 1808Y0500823KDT, the closest alternatives should be evaluated for capacitance stability under DC bias, solder-joint robustness, termination type, board flex exposure, temperature range, package height, and qualification needs. A standard 1808 X7R MLCC may function electrically, but it may not provide the same mechanical margin as the original FlexiCap™ device in boardflex-sensitive assemblies.
Knowles Syfer 1808Y0500823KDT Electrical and Mechanical Baseline
The Knowles Syfer 1808Y0500823KDT is a surface-mount multilayer ceramic capacitor designed around a balance of capacitance density, temperature stability, and mechanical stress tolerance.
| Parameter | Original Component |
|---|---|
| Manufacturer | Knowles Syfer |
| Part Number | 1808Y0500823KDT |
| Capacitance | 0.082 µF / 82 nF |
| Tolerance | ±10% |
| Rated Voltage | 50 V |
| Dielectric | X7R |
| Operating Temperature | -55°C to +125°C |
| Package | 1808 / 4520 metric |
| Dimensions | 4.50 mm x 2.00 mm |
| Maximum Thickness | 2.00 mm |
| Mounting Type | Surface mount MLCC |
| Termination Feature | FlexiCap™ soft termination |
| Typical Use | High-reliability and boardflex-sensitive circuits |
| Compliance | RoHS3, REACH unaffected, MSL 1 |
The 0.082 µF capacitance value is commonly used for decoupling, filtering, coupling, and transient noise reduction in power rails and signal-adjacent circuits. The X7R dielectric provides moderate capacitance stability across temperature, but actual capacitance can decrease under applied DC bias. For replacement approval, the effective capacitance at operating voltage should be reviewed rather than relying only on nominal 82 nF labeling.
The 1808 package gives higher mechanical area and capacitance capability than smaller MLCC packages, but larger ceramic bodies are more exposed to cracking from PCB bending. This is where the FlexiCap™ soft termination of the Knowles Syfer 1808Y0500823KDT affects replacement selection. In applications exposed to connector insertion force, depanelization stress, thermal cycling, or vibration, a flexible-termination alternative is closer to the original engineering intent than a standard termination MLCC.
Typical applications include high-reliability control boards, industrial electronics, automotive-adjacent modules, telecom equipment, power supply decoupling, and circuits where PCB flex can cause ceramic capacitor failure. A replacement should therefore be judged by both electrical match and mechanical survivability.
Candidate Equivalent Parts for Knowles Syfer 1808Y0500823KDT Replacement
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| KEMET | C1808C823K5RACTU | 0.082 µF, ±10%, 50 V, X7R, 1808 MLCC | Standard commercial MLCC termination, compact 1808 footprint | General decoupling, filtering, timing support, non-flex-sensitive boards | Matches capacitance, tolerance, voltage rating, dielectric class, and package size | Does not provide the same soft-termination behavior as Knowles Syfer FlexiCap™ | Suitable when electrical compatibility is the main requirement and PCB flex stress is controlled |
| KEMET | C1808C823K5RAC7800 | 0.082 µF, ±10%, 50 V, X7R, 1808 MLCC | Flexible termination version in KEMET FT-CAP style construction | Industrial boards, high-reliability decoupling, mechanically stressed PCB locations | Provides a closer mechanical replacement because flexible termination helps reduce cracking risk | Availability and exact termination code should be confirmed against the latest KEMET datasheet | Strong candidate when replacing Knowles Syfer 1808Y0500823KDT in boardflex-sensitive designs |
| TDK | C4520X7R1H823K200KA | 0.082 µF, ±10%, 50 V, X7R, 4520 metric / 1808 | TDK general-purpose MLCC, 2.00 mm thickness class | Power rail bypassing, industrial electronics, consumer and communication equipment | Electrical value, voltage rating, dielectric, and package dimensions align closely with the original | Standard termination may not equal FlexiCap™ mechanical performance | Good electrical substitute where mechanical stress is limited |
| Murata | GRM43DR71H823KA01L | 0.082 µF, ±10%, 50 V, X7R, 1808-class MLCC | Murata GRM multilayer ceramic capacitor platform | High-density boards, general decoupling, noise suppression | Offers comparable capacitance, voltage, tolerance, dielectric, and mounting format | Standard GRM parts are not necessarily soft-termination devices | Appropriate for general-purpose replacement after DC bias and layout clearance checks |
| Vishay | VJ1808Y823KXBAT | 0.082 µF, ±10%, 50 V, X7R, 1808 MLCC | Vishay VJ series ceramic capacitor | Filtering, bypassing, coupling, industrial and commercial circuits | Same nominal capacitance and package family support drop-in electrical evaluation | Mechanical robustness depends on exact termination and series option | Suitable for cost or sourcing diversification when FlexiCap™ is not mandatory |
| KYOCERA AVX | 18085C823KAT2A | 0.082 µF, ±10%, 50 V, X7R, 1808 MLCC | Established MLCC construction, tape-and-reel supply option | Decoupling, smoothing, filtering, general electronics | Matches key electrical parameters and physical size category | May require verification of thickness, termination finish, and flex capability | Useful as a broad-market equivalent for stable supply programs |
| Samsung | CL43B823KBJNNNE | 0.082 µF, ±10%, 50 V, X7R, 1808 MLCC | Samsung CL series ceramic capacitor | Consumer, industrial, telecom, and general power decoupling | Comparable nominal rating and 1808 footprint support electrical substitution | Standard termination; capacitance versus DC bias should be checked for the operating rail | Practical alternative where availability and cost are primary selection factors |
The KEMET C1808C823K5RAC7800 is the closest functional candidate when the original Knowles Syfer 1808Y0500823KDT was selected for boardflex protection. KEMET C1808C823K5RACTU, TDK C4520X7R1H823K200KA, Murata GRM43DR71H823KA01L, Vishay VJ1808Y823KXBAT, KYOCERA AVX 18085C823KAT2A, and Samsung CL43B823KBJNNNE are more typical electrical replacements, but their use should be tied to the actual mechanical risk of the PCB location.
For any 0.082 µF 50 V X7R 1808 capacitor replacement, capacitance under DC bias should be reviewed. X7R capacitors can lose effective capacitance as voltage increases, and different manufacturers may show different bias behavior even with the same nominal value.
Engineering Comparison of Knowles Syfer 1808Y0500823KDT Alternatives
| Replacement Option | Electrical Compatibility | Mechanical Compatibility | Performance Differences | Reliability Considerations | Package / Availability | Cost Considerations | Best Fit | Limitations |
|---|---|---|---|---|---|---|---|---|
| KEMET C1808C823K5RACTU | Strong match for 82 nF, ±10%, 50 V, X7R | Fits 1808 footprint, but standard termination | Similar nominal behavior, DC bias curve must be checked | Lower board-flex margin than FlexiCap™ | Broadly available MLCC style | Often competitive | Controlled-stress PCB locations | Not ideal where ceramic cracking risk drove the original selection |
| KEMET C1808C823K5RAC7800 | Strong electrical match | Flexible termination makes it closer to the original FlexiCap™ intent | Similar capacitance class with improved mechanical tolerance | Better suited for bending, vibration, and assembly stress | Availability depends on distributor stock and exact ordering code | May cost more than standard MLCCs | Best overall replacement when mechanical stress matters | Confirm exact termination, packaging, and qualification requirements |
| TDK C4520X7R1H823K200KA | Strong match for voltage, value, dielectric, and size | 4520 metric package aligns with 1808 land pattern | Good general-purpose electrical substitute | Reliable in standard mounting conditions | Common 1808 metric MLCC platform | Usually suitable for volume sourcing | General decoupling and filtering | Standard termination may not replicate FlexiCap™ stress relief |
| Murata GRM43DR71H823KA01L | Good electrical match | 1808-class size, layout check recommended | Murata dielectric behavior may differ under DC bias | Good general MLCC reliability if board flex is managed | Strong manufacturer ecosystem | Often favorable in high-volume purchasing | Multi-source BOM strategy | Mechanical protection may be lower than the original soft-termination part |
| Vishay VJ1808Y823KXBAT | Good nominal match | 1808 package supports footprint compatibility | Suitable for standard bypass and filtering use | Depends on exact termination and operating environment | Useful as alternate sourcing path | May be attractive depending on market stock | Procurement flexibility | Verify height, termination, and voltage derating policy |
| KYOCERA AVX 18085C823KAT2A | Good electrical match | 1808 case supports similar PCB layout | Comparable for general MLCC functions | Established MLCC supplier quality | Common format, but stock varies | Generally competitive | General-purpose electrical replacement | Not a direct mechanical equivalent to FlexiCap™ unless flexible option is specified |
| Samsung CL43B823KBJNNNE | Good capacitance, voltage, dielectric, and tolerance match | 1808 footprint class | Effective capacitance should be checked at applied DC voltage | Suitable for standard commercial and industrial layouts | Often available in volume | Frequently cost-effective | Cost-sensitive and supply-sensitive designs | Standard termination and DC bias behavior need validation |
For a direct replacement of the Knowles Syfer 1808Y0500823KDT, first separate the requirement into two tracks: electrical substitution and mechanical equivalence. If the capacitor is used on a stable section of the PCB with limited bending exposure, standard 1808 X7R alternatives such as KEMET C1808C823K5RACTU, TDK C4520X7R1H823K200KA, Murata GRM43DR71H823KA01L, Vishay VJ1808Y823KXBAT, KYOCERA AVX 18085C823KAT2A, or Samsung CL43B823KBJNNNE may be acceptable after footprint, height, and bias-performance checks.
If the capacitor is placed near connectors, board edges, mounting screws, depanelization zones, or large thermal-gradient areas, a flexible-termination part such as KEMET C1808C823K5RAC7800 is the closer replacement path. This is because the original Knowles Syfer 1808Y0500823KDT includes FlexiCap™ soft termination, which was likely chosen to reduce mechanical failure risk rather than only to meet capacitance and voltage requirements.
Before approving any substitute, compare the latest manufacturer datasheets for capacitance tolerance, DC bias curves, soldering profile, termination finish, RoHS status, MSL rating, and package dimensions. For sourcing support and quotations on Knowles Syfer 1808Y0500823KDT replacement parts, request pricing through IC-Components.com or email Info@IC-Components.com.




