The RK73H2HTTE2102F from KOA Speer Electronics is a 21 kΩ thick film chip resistor in the 2010 (5025 metric) package, designed for automotive and high-reliability applications where both power handling and dimensional constraints come into play. With a power rating of 0.75W—higher than the typical 0.5W found in many 2010-format resistors—this component provides additional thermal margin in compact layouts, making it suitable for designs that need to dissipate heat in limited board space without moving to a larger footprint.
The ±1% tolerance and ±100ppm/°C temperature coefficient place the RK73H2HTTE2102F in the precision category for thick film technology, offering stable resistance across the −55°C to 155°C operating range. This stability is reinforced by AEC-Q200 qualification, which ensures the resistor meets automotive stress testing standards for temperature cycling, moisture resistance, and mechanical shock. The moisture-resistant construction further supports reliability in environments where humidity or condensation could otherwise degrade performance or long-term stability.
At 5.00mm × 2.50mm × 0.70mm (0.197" × 0.098" × 0.028"), the 2010 package balances ease of automated assembly with thermal performance. The two-terminal layout is compatible with standard pick-and-place equipment, and Tape & Reel packaging facilitates high-volume manufacturing. The component's MSL 1 rating allows unlimited floor life after opening, simplifying handling and reducing the risk of moisture-induced soldering defects during reflow.
The RK73H2HTTE2102F fits applications such as voltage dividers, pullup and pulldown networks, current sensing, signal conditioning, and general-purpose resistive loads in automotive control modules, power management circuits, and industrial systems. The 21 kΩ value is common in analog interface circuits, bias networks for operational amplifiers, and RC timing configurations where moderate impedance levels are required. The elevated power rating extends safe operating margins in pulse-width modulation filtering, gate drive circuits, and other scenarios where transient or continuous dissipation approaches the limits of lower-wattage parts.
As an active product in the RK73H series, the RK73H2HTTE2102F is supported by KOA Speer's manufacturing infrastructure and carries RoHS 3 and REACH compliance, aligning with global environmental and material regulations. The ECCN code EAR99 indicates no export licensing restrictions for most destinations, and the HTSUS classification 8533.21.0030 covers fixed carbon or film resistors for customs purposes. With 1099 pieces available as new original stock, the component is accessible for both prototype validation and production planning.
RK73H2HTTE2102F (1)
Replacement Planning for KOA Speer RK73H2HTTE2102F 21 kOhm 2010 Chip Resistor
When a KOA Speer RK73H2HTTE2102F is unavailable, nearing lifecycle constraints, or being second-sourced for production risk control, the replacement decision is not limited to matching “21 kOhm, 1%, 2010.” The substitute must also align with power rating, temperature coefficient, automotive qualification, board footprint, termination behavior, moisture resistance, and assembly packaging.
The RK73H2HTTE2102F is a 21 kOhm ±1% thick film chip resistor in a 2010 package with 0.75 W power rating, ±100 ppm/°C TCR, AEC-Q200 rating, moisture-resistant construction, and tape-and-reel packaging. Suitable replacement part numbers to evaluate include:
| Manufacturer | Candidate Part Number |
|---|---|
| YAGEO |
|
| Vishay |
|
| Panasonic | ERJ-12SF2102U |
| TE Connectivity | CRGCQ2010F21K |
| Bourns | CR2010-FX-2102ELF |
| Stackpole Electronics |
|
These parts are best evaluated as possible equivalents or functional alternatives, not automatic drop-in replacements. The final choice depends on whether the design requires AEC-Q200 compliance, long-term humidity stability, derating margin, availability in production packaging, and qualification consistency across manufacturing lots.
What the KOA Speer RK73H2HTTE2102F Defines as the Original Design Baseline
The KOA Speer RK73H2HTTE2102F belongs to the RK73H thick film resistor series and is specified as a 21 kOhm ±1% 2010 chip resistor rated for 0.75 W operation. Its 2010 body size, also known as 5025 metric, measures approximately 5.00 mm x 2.50 mm with a maximum seated height of 0.70 mm. This footprint is the first mechanical constraint when selecting a replacement, because changing package size may affect solder joint geometry, thermal spreading, automated placement settings, and PCB land pattern compatibility.
Electrically, the 21 kOhm resistance and ±1% tolerance establish the allowable initial resistance range. The ±100 ppm/°C temperature coefficient affects resistance drift across temperature, especially in voltage sensing, biasing, feedback, and signal conditioning circuits exposed to wide temperature swings. The -55°C to +155°C operating range and AEC-Q200 rating make the part suitable for automotive and industrial environments where thermal cycling, vibration, and humidity exposure may influence long-term stability.
The 0.75 W rating is also tied to board layout and ambient temperature. A replacement resistor with the same package and nominal power rating may still require review of derating curves, terminal temperature limits, and PCB copper area assumptions. Moisture resistance is another design factor. In automotive electronics, outdoor equipment, power supplies, and control modules, humidity-driven resistance drift can become more relevant than nominal tolerance alone.
Typical uses for the RK73H2HTTE2102F include pull-up and pull-down networks, voltage dividers, feedback paths in power conversion circuits, current-limited bias paths, automotive sensor interfaces, ECU peripheral circuitry, and industrial control boards. In these applications, a replacement should preserve resistance accuracy, thermal behavior, solderability, qualification level, and supply-chain continuity.
Candidate Equivalent and Alternative Parts for KOA Speer RK73H2HTTE2102F
The following table compares practical replacement candidates for the KOA Speer RK73H2HTTE2102F. Each option should be checked against the latest manufacturer datasheet, approved vendor list, and circuit-level qualification requirements before release to production.
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| YAGEO |
| 21 kOhm, ±1%, 2010, thick film, typically 0.75 W class, ±100 ppm/°C, automotive-grade series | AEC-Q200 oriented thick film construction, tape-and-reel availability, broad automotive adoption | Automotive control modules, power management circuits, voltage dividers, sensor bias networks | Closely matches RK73H2HTTE2102F in resistance, tolerance, package size, TCR class, and automotive positioning | Exact pulse load, overload, and humidity specifications should be compared to KOA RK73H series data | Strong first-choice alternative where AEC-Q200 qualification and 2010 footprint retention are required |
| Vishay |
| 21 kOhm, ±1%, 2010, thick film, 0.75 W class, ±100 ppm/°C | Established CRCW thick film platform, lead-free termination, broad distributor availability | General industrial electronics, automotive-qualified designs depending on series approval, control and feedback circuits | Matches the core electrical and mechanical requirements of RK73H2HTTE2102F | Confirm automotive approval and environmental test coverage for the exact ordering code | Suitable for high-volume replacement where Vishay CRCW is already qualified in the design environment |
| Panasonic | ERJ-12SF2102U | 21 kOhm, ±1%, 2010, thick film, 0.75 W class, ±100 ppm/°C | Panasonic ERJ series reliability, compact surface-mount construction, tape-and-reel format | Consumer, industrial, automotive-related electronics depending on qualification requirements | Provides matching resistance value, tolerance, package size, and power class | Automotive qualification and sulfur/moisture performance should be verified for the exact application | Good option when Panasonic ERJ series is preferred or already used on the same PCB |
| TE Connectivity | CRGCQ2010F21K | 21 kOhm, ±1%, 2010, thick film, automotive-grade CRGCQ family | AEC-Q200 focused general-purpose chip resistor family, stable thick film technology | Automotive electronics, body control modules, industrial control boards, DC bias networks | Similar 2010 package, 21 kOhm value, 1% tolerance, and automotive replacement intent | Availability and reel quantity may differ from KOA tape-and-reel supply | Useful second source for automotive designs needing documented qualification support |
| Bourns | CR2010-FX-2102ELF | 21 kOhm, ±1%, 2010, thick film, RoHS compliant, 0.75 W class depending on series data | General-purpose surface-mount thick film resistor, common EIA size coding | Industrial electronics, power supplies, control circuitry, non-safety signal networks | Electrically and mechanically close to RK73H2HTTE2102F for many 2010 resistor positions | AEC-Q200 and moisture resistance must be confirmed before automotive substitution | Appropriate for industrial or commercial use, or automotive only after qualification review |
| Stackpole Electronics |
| 21 kOhm, ±1%, 2010, thick film, 0.75 W class, ±100 ppm/°C typical class | Cost-effective general-purpose thick film resistor, widely used standard footprint | Commercial equipment, industrial boards, low-to-moderate stress resistor networks | Matches nominal value, tolerance, size, and basic power class | May not provide the same automotive or moisture-resistant positioning as RK73H2HTTE2102F | Best for non-automotive or lower-environmental-stress replacements where AEC-Q200 is not required |
Among these options, YAGEO
AC2010FK-0721KL
, Vishay
AC2010FK-0721KL
YAGEO
RES SMD 21K OHM 1% 3/4W 2010
2000000
CRCW201021K0FKEF
, and TE Connectivity CRGCQ2010F21K are usually the closest starting points when an automotive-grade 21 kOhm 2010 resistor replacement is needed. Panasonic ERJ-12SF2102U may also be suitable when its qualification data aligns with the design requirements. Bourns CR2010-FX-2102ELF and Stackpole
CRCW201021K0FKEF
Vishay Dale
RES SMD 21K OHM 1% 3/4W 2010
2000000
RMCF2010FT21K0
are practical alternatives where the circuit does not rely on the full automotive and moisture-resistant profile of the KOA Speer RK73H2HTTE2102F.
RMCF2010FT21K0
Stackpole Electronics Inc
RES 21K OHM 1% 3/4W 2010
2000000
Engineering Comparison of RK73H2HTTE2102F Replacement Options
A replacement for KOA Speer RK73H2HTTE2102F should be selected by combining datasheet comparison with application-level risk review. The following table focuses on practical engineering trade-offs rather than only nominal resistor values.
| Evaluation Factor | YAGEO AC2010FK-0721KL | Vishay CRCW201021K0FKEF | Panasonic ERJ-12SF2102U | TE Connectivity CRGCQ2010F21K | Bourns CR2010-FX-2102ELF | Stackpole RMCF2010FT21K0 |
|---|---|---|---|---|---|---|
| Electrical compatibility | Strong match: 21 kOhm, ±1%, 2010, ±100 ppm/°C class | Strong match for standard 21 kOhm 1% 2010 designs | Strong nominal match; verify exact derating curve | Strong match for automotive-oriented applications | Good nominal match; qualification depends on application | Good nominal match for general-purpose circuits |
| Mechanical compatibility | 2010 footprint aligns closely with RK73H2HTTE2102F | 2010 body size supports drop-in PCB compatibility | 2010 package supports same land pattern in most layouts | 2010 package suitable for direct footprint replacement | 2010 footprint compatible | 2010 footprint compatible |
| Power and thermal behavior | Comparable 0.75 W class; review derating at high ambient temperature | Comparable 0.75 W class; check terminal temperature assumptions | Similar power class; validate heat dissipation on actual PCB | Comparable power class for automotive/general designs | Similar class but confirm continuous load margins | Suitable where thermal stress is moderate |
| Automotive suitability | Well suited where AEC-Q200 documentation is required | Suitable if exact CRCW ordering code meets qualification requirements | Requires confirmation for the exact part and application class | Designed for automotive-grade replacement use | Use only after verifying AEC-Q200 requirement compliance | Better for non-automotive unless qualification is documented |
| Moisture and environmental behavior | Good candidate for moisture-exposed applications | Reliable thick film option; compare humidity test limits | Check humidity and load-life data versus KOA RK73H | Good automotive environmental positioning | Confirm humidity performance before replacing moisture-resistant KOA part | Less suitable where moisture resistance drove the original selection |
| Supply-chain flexibility | Broad availability through major channels | Broad global availability and multiple reel options | Useful where Panasonic sourcing is preferred | Good second-source path for automotive BOMs | Often attractive for general industrial sourcing | Often cost-effective and widely stocked |
| Cost considerations | Typically competitive for automotive-grade thick film | May vary by distributor and qualification level | May carry brand or availability-driven pricing differences | Automotive positioning may affect pricing | Often cost-effective for commercial/industrial use | Frequently cost-oriented for general-purpose designs |
| Best-fit scenario | Closest practical alternative for automotive 21 kOhm 2010 replacement | High-volume designs needing a well-known thick film platform | Designs already standardized around Panasonic ERJ resistors | Automotive or industrial boards needing qualified second sourcing | Commercial/industrial boards where AEC-Q200 is not the main driver | Cost-sensitive non-automotive designs |
| Main limitation | Confirm reel code, derating, and environmental test equivalence | Confirm exact automotive approval status | Confirm qualification and environmental robustness | Availability may vary by region and reel format | Not always equivalent to KOA’s automotive moisture-resistant intent | Qualification gap for automotive or harsh environments |
For a conservative replacement path, start with YAGEO
AC2010FK-0721KL
or TE Connectivity CRGCQ2010F21K when the original KOA Speer RK73H2HTTE2102F was selected for AEC-Q200 and environmental durability. Vishay
AC2010FK-0721KL
YAGEO
RES SMD 21K OHM 1% 3/4W 2010
2000000
CRCW201021K0FKEF
is also a strong candidate where the exact CRCW ordering code satisfies the required qualification documentation. Panasonic ERJ-12SF2102U is a reasonable fit when Panasonic ERJ series parts are already approved in the design. Bourns CR2010-FX-2102ELF and Stackpole
CRCW201021K0FKEF
Vishay Dale
RES SMD 21K OHM 1% 3/4W 2010
2000000
RMCF2010FT21K0
are better treated as functional alternatives for commercial or industrial applications unless automotive and moisture-resistance requirements are independently verified.
RMCF2010FT21K0
Stackpole Electronics Inc
RES 21K OHM 1% 3/4W 2010
2000000
For quotations, availability checks, and sourcing support for RK73H2HTTE2102F replacement parts, request pricing through IC-Components.com or email Info@IC-Components.com.




