The KEMET 274AA24350AA0J is a through-hole polypropylene film capacitor rated at 3.5µF with a voltage rating of 470V and ±5% tolerance, designed for applications requiring stable performance across a -25°C to +85°C temperature range. This box-packed component meets ROHS compliance standards and is supplied as new original stock.
Polypropylene film capacitors deliver low dielectric losses and excellent frequency stability compared to electrolytic alternatives, making them suitable for power supply filtering, snubber circuits, motor run applications, and AC line conditioning where voltage stress and thermal cycling are present. The 470V rating provides adequate margin for mains-connected circuits operating at 230VAC or 277VAC, including industrial control systems, HVAC equipment, and power factor correction stages.
The 3.5µF capacitance value falls within a range commonly specified for motor starting assistance in single-phase induction motors, phase correction networks in switch-mode power supplies, and energy storage in pulse discharge circuits. The ±5% tolerance ensures predictable behavior in timing, resonant tank, and filter applications where component variation impacts circuit performance. Polypropylene dielectric exhibits low temperature coefficient and minimal capacitance drift over the operating temperature range, supporting consistent operation in environments subject to thermal cycling or outdoor installation.
Through-hole construction facilitates secure mechanical mounting on PCBs and offers better vibration resistance than surface-mount packages, a consideration for industrial equipment, motor drives, and high-reliability systems. The lead configuration allows for manual or automated insertion and is compatible with wave soldering processes. The -25°C to +85°C range covers typical commercial and light industrial environments, while the voltage rating accommodates transient spikes and voltage swell conditions common in grid-connected equipment.
This film capacitor type offers self-healing properties, where localized dielectric breakdown results in metallization vaporization rather than catastrophic failure, extending service life in applications exposed to repetitive overvoltage stress. The KEMET 274AA24350AA0J provides a reliable solution for designers requiring a mid-capacitance, high-voltage component in through-hole format with polypropylene's inherent stability and low-loss characteristics.
Selecting a KEMET 274AA24350AA0J Replacement Without Creating Fit, Voltage, or Lifetime Risks
Finding a suitable KEMET 274AA24350AA0J replacement is not only a matter of matching “3.5uF 470V.” Polypropylene film capacitors used in AC, motor-run, snubber, power-factor, and high-ripple circuits are sensitive to voltage type, ripple current, dielectric construction, lead spacing, enclosure style, safety approval, and operating temperature. A replacement that matches capacitance but differs in AC rating, lead pitch, or dissipation capability may pass a basic electrical check but fail mechanically or thermally in service.
The original KEMET 274AA24350AA0J is a 3.5uF, ±5%, 470V, through-hole polypropylene film capacitor with an operating temperature range of -25℃ to +85℃. Candidate equivalent and alternative part numbers that may be considered include:
| Manufacturer | Candidate Part Number | Replacement Position |
|---|---|---|
| KEMET | C274ACF4350SA0J | Closest same-brand 3.5uF 470V-class polypropylene option, subject to package verification |
| TDK EPCOS | B32332I6355J080 | 3.5uF AC motor-run polypropylene alternative, commonly considered where 450VAC is acceptable |
| Panasonic | ECW-FD2J355J | PCB-mounted polypropylene film alternative for DC or pulse-rated applications |
| Vishay |
| Metallized polypropylene alternative for DC-link, pulse, or filtering use |
| Cornell Dubilier |
| High-current polypropylene film alternative where ripple and pulse capability are priorities |
Before replacing KEMET 274AA24350AA0J, confirm whether the 470V rating in the application is AC RMS, DC, or peak pulse voltage. This single point often determines whether an AC motor-run capacitor, PCB metallized polypropylene capacitor, or high-pulse DC film capacitor is the correct replacement path.
What the KEMET 274AA24350AA0J Polypropylene Film Capacitor Must Do in the Circuit
The KEMET 274AA24350AA0J is specified as a 3.5uF polypropylene film capacitor with ±5% tolerance, 470V voltage rating, through-hole mounting, and -25℃ to +85℃ operating temperature range. These specifications define more than nominal capacitance; they influence current handling, loss, mechanical fit, and expected lifetime.
| Parameter | KEMET 274AA24350AA0J Specification | Replacement Impact |
|---|---|---|
| Capacitance | 3.5uF | Replacement should normally remain 3.5uF unless the circuit allows retuning; motor, timing, and resonant circuits are sensitive to capacitance shift |
| Tolerance | ±5% | A ±10% substitute may work in filtering but can alter motor phase shift, frequency response, or reactive current |
| Voltage Rating | 470V | Replacement must match the same voltage type; 470VAC, 470VDC, and pulse voltage ratings are not interchangeable |
| Dielectric | Polypropylene film / CBB type | Supports low loss, good insulation resistance, and stable capacitance compared with many general-purpose dielectrics |
| Mounting | Through hole | Lead pitch, body size, and clearance distance must be checked before approving an equivalent part |
| Temperature Range | -25℃ to +85℃ | A replacement with the same or wider range is preferred, especially near motors, relays, power supplies, or enclosed assemblies |
| Packaging | Box-packed | Indicates loose or boxed stock; does not alone confirm body style or lead form |
The main strengths of the original KEMET 274AA24350AA0J are its polypropylene dielectric, moderate capacitance value, ±5% tolerance, and high-voltage capability. These traits make it suitable for applications such as AC filtering, motor auxiliary circuits, lighting ballasts, power conversion filtering, snubber networks, and general CBB capacitor replacement where low dielectric loss is required.
For replacement selection, the most practical checks are:
| Engineering Check | Why It Matters |
|---|---|
| AC vs DC voltage rating | A DC-rated film capacitor should not replace an AC-rated motor-run capacitor unless the circuit conditions prove it is safe |
| RMS current and ripple current | Heat rise in polypropylene capacitors depends strongly on current, frequency, and ESR |
| Lead spacing and creepage | A similar capacitance part may not fit the PCB or may reduce safety clearance |
| Capacitance tolerance | ±5% should be retained where phase shift, impedance, or timing accuracy matters |
| Safety approvals | Needed if connected across AC mains or used in regulated equipment |
| Temperature and lifetime | A capacitor operating close to +85℃ may require a higher-temperature or larger-body replacement |
Candidate KEMET 274AA24350AA0J Equivalent and Alternative Part Numbers
The following table compares possible replacement components for the KEMET 274AA24350AA0J. These parts are not automatically drop-in substitutes; each should be checked against the actual circuit voltage waveform, mounting space, terminal style, and approval requirements.
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| KEMET | C274ACF4350SA0J | 3.5uF, 470V-class polypropylene film, ±5% configuration commonly associated with C274 AC film capacitors | Same manufacturer family direction, polypropylene dielectric, AC-capable construction depending on exact suffix | Motor-run circuits, AC filtering, reactive power applications, fan and pump circuits | Closest same-brand path when replacing a KEMET 274AA24350AA0J 3.5uF 470V polypropylene capacitor | Mechanical format, terminal type, and approval markings must be compared with the installed part | First candidate when a same-brand 3.5uF 470V polypropylene film capacitor replacement is preferred |
| TDK EPCOS | B32332I6355J080 | 3.5uF, typically 450VAC class, metallized polypropylene motor-run capacitor | Self-healing polypropylene design, AC continuous-duty orientation, common in motor auxiliary circuits | Fan motors, HVAC motors, pumps, compressors, single-phase motor phase-shift circuits | Suitable when the original circuit uses AC RMS voltage and 450VAC rating is accepted by design margin | Voltage rating may be lower than 470V; package may be can-style rather than PCB through-hole | Use for AC motor-run replacement after confirming voltage derating, mounting, terminals, and enclosure space |
| Panasonic | ECW-FD2J355J | 3.5uF, 630VDC-class polypropylene film capacitor, ±5% option depending on full ordering code | Low-loss radial film capacitor for PCB mounting, stable capacitance, good insulation resistance | DC filtering, pulse circuits, power supply film capacitor positions, non-mains AC signal paths | Can replace the original where the 470V rating is DC or where the circuit is a PCB-mounted film capacitor application | Not a direct AC motor-run substitute unless AC RMS, ripple, and safety requirements are verified | Use when the KEMET 274AA24350AA0J is installed in a DC/pulse filtering circuit rather than continuous AC motor service |
| Vishay |
| 3.5uF, 630VDC-class metallized polypropylene, ±5% configuration by ordering code | High-performance MKP film construction, good pulse behavior, PCB-oriented package options | DC-link filtering, snubbers, power converters, resonant circuits, industrial electronics | Appropriate where capacitance, tolerance, dielectric type, and DC voltage headroom match the original application | Body size and lead pitch may differ; AC mains approvals must be verified separately | Use for high-quality DC or pulse film capacitor substitution when ripple and layout are checked |
| Cornell Dubilier |
| 3.5uF-class polypropylene film capacitor, high-current/high-pulse family orientation | Rugged metallized polypropylene construction, suitable for demanding power electronics use | Snubber networks, pulse discharge, inverter filtering, industrial power conversion | Can be selected when the original capacitor operates under high ripple or pulse stress rather than simple low-current filtering | May be physically larger; tolerance and voltage suffix must be matched to the application requirement | Use where electrical stress margin and pulse performance take priority over compact size |
For a KEMET 274AA24350AA0J equivalent part, the same-brand KEMET C274ACF4350SA0J is generally the most direct candidate if the mechanical configuration matches. TDK EPCOS B32332I6355J080 is more appropriate when the original is functioning as an AC motor-run or AC phase-shift capacitor. Panasonic ECW-FD2J355J and Vishay
MKP1848C63550JP4
are stronger candidates for PCB-mounted DC or pulse applications. Cornell Dubilier
MKP1848C63550JP4
Vishay Beyschlag/Draloric/BC Components
CAP FILM 35UF 5% 500VDC RADIAL
5442
935C2W3K-F
is better suited to high-current or pulse-stress positions where thermal margin is a deciding factor.
935C2W3K-F
Cornell Dubilier Electronics (CDE)
CAP FILM 3UF 10% 200VDC AXIAL
11866
Engineering Trade-Offs When Comparing KEMET 274AA24350AA0J Replacement Options
A practical KEMET 274AA24350AA0J replacement decision should balance electrical equivalence, mechanical installation, and operating stress. The best alternative depends on whether the circuit is AC continuous-duty, DC filtering, pulse suppression, or motor phase shifting.
| Comparison Factor | KEMET C274ACF4350SA0J | TDK EPCOS B32332I6355J080 | Panasonic ECW-FD2J355J | Vishay MKP1848C63550JP4 | Cornell Dubilier 935C2W3K-F |
|---|---|---|---|---|---|
| Electrical Compatibility | Strong candidate for 3.5uF 470V-class KEMET replacement | Good for AC motor-run use if 450VAC rating is acceptable | Good for DC-rated PCB film applications | Good for DC-link, pulse, and filtering use | Good where ripple and pulse current are higher |
| Mechanical Compatibility | Potentially closest if from the same KEMET AC film family | May require can mounting or different terminals | Usually PCB radial, but lead pitch must be checked | PCB-oriented; body size may be larger | Often larger package; layout review usually required |
| Capacitance Match | 3.5uF target value | 3.5uF target value | 3.5uF target value | 3.5uF target value | 3.5uF-class option, suffix verification needed |
| Tolerance Suitability | Can align with ±5% original | Often available in ±5% motor-run grades | ±5% ordering option should be selected | ±5% ordering option should be selected | Confirm exact tolerance suffix before approval |
| AC Continuous-Duty Suitability | Good if exact suffix confirms AC rating | Strong in motor-run applications | Limited unless AC RMS rating supports the circuit | Limited unless AC rating and approvals are confirmed | Application-dependent; better for pulse than standard motor-run use |
| DC / Pulse Suitability | Application-dependent | Less optimized for PCB DC pulse layouts | Good for DC filtering and pulse-rated PCB use | Good for power conversion and pulse service | Strong where high-current pulse capability is needed |
| Reliability Considerations | Same-brand continuity helps reduce qualification effort | Proven motor-run style where thermal space is available | Reliable when voltage derating and ripple current are within limits | Good performance margin in industrial electronics | Suitable for higher-stress designs but may need thermal validation |
| Cost and Availability | May be preferred for BOM continuity | Often widely available in motor capacitor channels | Typically economical for PCB film capacitor replacement | May cost more than basic film capacitors | May cost more due to high-current construction |
| Best-Fit Scenario | Same-brand 3.5uF 470V polypropylene replacement | AC motor, fan, pump, or HVAC capacitor replacement | PCB-mounted DC filter replacing a 470VDC-class CBB capacitor | Power electronics, inverter, resonant, or pulse filtering | Snubber, pulse, or high-ripple industrial replacement |
| Main Limitation | Must verify package and terminal style | 450VAC rating may not equal original 470V margin | Not automatically suitable for AC mains continuous duty | Mechanical fit and approval status must be checked | Larger size and suffix-dependent ratings |
From an engineering perspective, the replacement path can be narrowed as follows:
| Application Condition | Preferred Replacement Direction | Reason |
|---|---|---|
| Original part is used in AC motor-run service | KEMET C274ACF4350SA0J or TDK EPCOS B32332I6355J080 | These are closer to AC polypropylene capacitor behavior |
| Original part is PCB-mounted in a DC power circuit | Panasonic ECW-FD2J355J or Vishay
| DC voltage rating, lead pitch, and ripple current become the main selection points |
| Circuit has high pulse or snubber stress | Vishay
| Pulse current and thermal behavior matter more than nominal capacitance alone |
| Same-brand qualification is preferred | KEMET C274ACF4350SA0J | Keeps manufacturer continuity and may simplify documentation |
| Space is limited on the PCB | Panasonic ECW-FD2J355J or verified KEMET option | Package size and lead pitch may be easier to align than motor-run can capacitors |
The safest approval process is to compare the original KEMET 274AA24350AA0J against each replacement part for capacitance, tolerance, voltage type, RMS current, operating temperature, lead spacing, body dimensions, flame rating, and safety approvals. For pricing and availability of KEMET 274AA24350AA0J replacements such as KEMET C274ACF4350SA0J, TDK EPCOS B32332I6355J080, Panasonic ECW-FD2J355J, Vishay
MKP1848C63550JP4
, and Cornell Dubilier
MKP1848C63550JP4
Vishay Beyschlag/Draloric/BC Components
CAP FILM 35UF 5% 500VDC RADIAL
5442
935C2W3K-F
, obtain quotations through IC-Components.com or email Info@IC-Components.com.
935C2W3K-F
Cornell Dubilier Electronics (CDE)
CAP FILM 3UF 10% 200VDC AXIAL
11866





