The PMN70XPE from PERIA is a discrete semiconductor component housed in a SOT23-6 package, designed to meet the needs of space-constrained circuit designs where board real estate and thermal management are key considerations. The SOT23-6 form factor provides six accessible pins within a compact surface-mount footprint, enabling efficient signal routing and integration into high-density PCB layouts commonly found in portable electronics, battery management systems, and low-power analog front ends.
This component supports dual-channel or multi-function configurations depending on the internal architecture, allowing designers to consolidate logic, switching, or interface functions into a single package. The SOT23-6 configuration is widely adopted for its balance between pin count and manufacturability, making it suitable for automated pick-and-place assembly and reflow soldering processes. Thermal performance in this package benefits from low-profile construction and direct copper pad contact, which aids in heat dissipation during continuous operation or transient load conditions.
Circuit designers working with the PMN70XPE can leverage its pinout flexibility for applications such as dual MOSFET gate drivers, complementary switching pairs, or integrated analog signal conditioning. The SOT23-6 package supports standard 0.95 mm pin pitch, ensuring compatibility with conventional PCB footprints and enabling straightforward migration from legacy designs or competitive components. The component is supplied in tape and reel format for high-volume production environments, supporting consistent orientation and reliable feeding in automated assembly lines.
PERIA positions this device as an active product within its discrete semiconductor portfolio, reflecting ongoing manufacturing support and availability for both prototype development and full-scale production. The PMN70XPE is suitable for applications spanning consumer electronics, industrial control modules, automotive auxiliary circuits, and IoT edge devices where compact form factor and multi-channel functionality are required. Its SOT23-6 package also facilitates thermal modeling and simulation during the design phase, allowing engineers to optimize copper pour, via placement, and ambient airflow to meet target junction temperatures under specified load profiles.
PMN70XPE PERIA Replacement Search: Avoiding Fit, Drive, and Thermal Mismatches
Finding a PMN70XPE PERIA equivalent is not only a matter of matching a part number. The listing identifies PMN70XPE as an active SOT23-6 device, so replacement selection should confirm package outline, pin assignment, MOSFET polarity, gate-drive conditions, voltage rating, current capability, RDS(on), thermal behavior, and availability.
Possible PMN70XPE replacement and alternative part numbers to evaluate include:
| Manufacturer | Candidate Part Number | Replacement Position |
|---|---|---|
| PERIA | PMN70XPE | Original reference part |
| Nexperia | PMN70XPE | Closest part-number match where available |
| Nexperia |
PMN70XP
PERIA
PMN70XP NEXPERIA TSOP6
36500
| Same-family candidate, subject to package and suffix verification |
| Vishay |
Si2301CDS
VISHAY
Si2301CDS Vishay SOT-23
4260
| P-channel MOSFET alternative for compact load switching |
| Infineon |
| P-channel logic-level MOSFET alternative |
| Alpha & Omega Semiconductor |
AO3401A
UMW
30V 4.1A 65MR@10V,4.2A 350MW 1.3
1940585
| Higher-voltage P-channel SOT-23 alternative |
| Diodes Incorporated |
| Low-RDS(on) P-channel MOSFET alternative |
| onsemi |
FDN306P
Fairchild Semiconductor
SMALL SIGNAL FIELD-EFFECT TRANSI
71400
| General-purpose P-channel MOSFET alternative |
Because PMN70XPE is listed in SOT23-6 while several practical alternatives are supplied in SOT-23 or related small-outline packages, replacement decisions should not be based on electrical ratings alone. A part may meet voltage and current requirements but still require PCB layout changes, pin remapping, or thermal derating.
What PMN70XPE PERIA Provides in the Original Circuit
PMN70XPE from PERIA is presented as an active small-outline device in a SOT23-6 package. The available product data is limited, so a replacement workflow should begin by confirming the actual function in the circuit. Based on the PMN70XPE naming convention and common industry usage, it is typically evaluated as a compact P-channel MOSFET candidate for low-voltage switching, load control, battery-powered circuits, and power-path management.
Key replacement-related attributes include:
| Parameter Area | PMN70XPE PERIA Consideration | Why It Affects Replacement Choice |
|---|---|---|
| Device type | Likely P-channel MOSFET class device; verify by datasheet or circuit tracing | Polarity must match; replacing a P-channel MOSFET with an N-channel device changes drive logic and topology |
| Package / case | Listed as SOT23-6 | Pinout and footprint must be checked before approving any alternative |
| Product status | Active | Direct sourcing may be preferred if qualification risk is low |
| Typical function | High-side load switch, reverse-polarity protection, battery rail switching, portable device power gating | Application determines whether RDS(on), leakage, or gate threshold is the main selection factor |
| Gate drive | Should be checked against available VGS in the circuit | A substitute must fully enhance at the available gate-source voltage |
| Voltage rating | Must exceed maximum drain-source voltage plus transient margin | Underrated MOSFETs may fail during hot-plug, inductive load events, or adapter insertion |
| Current and thermal capability | Must be evaluated with PCB copper area and ambient temperature | Small packages often reach thermal limits before reaching headline current ratings |
The main features that influence PMN70XPE equivalent selection are compact package size, low-voltage switching suitability, low conduction loss requirements, and compatibility with logic-level gate drive. In real designs, the best replacement is usually the part that preserves the original switching behavior while avoiding excessive voltage drop, temperature rise, leakage current, and gate-drive margin loss.
PMN70XPE Alternative Parts and Engineering Fit Assessment
The following table compares practical PMN70XPE replacement candidates. Electrical values should be verified against the latest manufacturer datasheets because package suffixes, reel options, and die revisions can affect ordering and qualification.
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Nexperia | PMN70XPE | P-channel MOSFET family candidate; compact small-outline package; logic-level switching class | Closest naming match to PMN70XPE; suitable for low-voltage switching designs | Portable electronics, battery switching, small load switches, power-path control | Best first-choice candidate when the original PERIA PMN70XPE was selected by part-number equivalence | Confirm manufacturer, package marking, SOT23-6 footprint, and pinout before substitution | Use where direct or near-direct PMN70XPE replacement is required |
| Nexperia |
PMN70XP
PERIA
PMN70XP NEXPERIA TSOP6
36500
| Same-family
PMN70XP
PERIA
PMN70XP NEXPERIA TSOP6
36500
| Similar device family and electrical intent | Low-side or high-side switching depending on circuit topology, compact DC rail control | May match the original electrical class if the suffix difference is packaging or ordering related | Suffix may indicate package, tolerance, or packing difference; not automatically interchangeable | Use after confirming datasheet suffix meaning and PCB compatibility |
| Vishay |
Si2301CDS
VISHAY
Si2301CDS Vishay SOT-23
4260
| P-channel MOSFET; commonly used in compact SOT-23 power switching; typical low-voltage rating class | Low gate-drive requirement, compact footprint, low conduction loss for small loads | Battery-powered devices, load switches, portable product rails | Good candidate where the design needs a small P-channel MOSFET with logic-level drive | Usually SOT-23 3-lead, not SOT23-6; may require layout change | Use for redesigns or boards where SOT-23 alternatives are acceptable |
| Infineon |
| P-channel logic-level MOSFET; commonly rated for low-voltage power switching | Wide availability, established automotive/industrial sourcing channels depending on grade | High-side switching, battery rail disconnect, small DC load control | Suitable when gate drive is limited and a proven logic-level P-channel MOSFET is needed | Pinout/package may differ from PMN70XPE listing; RDS(on) and current rating must be checked at actual VGS | Use when supply availability and mature qualification history matter |
| Alpha & Omega Semiconductor |
AO3401A
UMW
30V 4.1A 65MR@10V,4.2A 350MW 1.3
1940585
| P-channel MOSFET; often selected for higher voltage margin than 20 V class devices | Strong availability, broad use in consumer and industrial boards | Adapter input switching, power mux support, small load switching | Useful when the replacement needs more drain-source voltage margin | May have higher RDS(on) than lower-voltage optimized devices; SOT-23 footprint verification needed | Use where extra voltage headroom is preferred over minimum conduction loss |
| Diodes Incorporated |
| P-channel MOSFET; low RDS(on) class; compact package | Low conduction loss, efficient load switching in small designs | Battery systems, portable electronics, DC rail isolation | Can replace PMN70XPE electrically where low on-resistance is a priority | Package may not match SOT23-6; thermal resistance depends heavily on PCB copper | Use for efficiency-sensitive low-voltage rails after layout review |
| onsemi |
FDN306P
Fairchild Semiconductor
SMALL SIGNAL FIELD-EFFECT TRANSI
71400
| P-channel MOSFET; general-purpose small-signal/power switching device | Established sourcing, stable documentation, suitable for moderate loads | General load switching, power gating, handheld equipment | Suitable where current demand is moderate and sourcing reliability is preferred | May offer less performance headroom than newer low-RDS(on) parts | Use for conservative designs with moderate current and known thermal limits |
A PMN70XPE equivalent should be shortlisted only after the original circuit is checked for VDS stress, maximum continuous and pulsed current, switching frequency, gate resistor value, and acceptable voltage drop. For high-side switching, the gate-source voltage during startup and shutdown is especially relevant because some alternatives may look compatible at -4.5 V but perform poorly at -1.8 V or -2.5 V gate drive.
Comparing PMN70XPE Replacement Options by Compatibility, Risk, and Trade-Offs
The most practical PMN70XPE replacement choice depends on whether the priority is drop-in compatibility, electrical headroom, efficiency, sourcing flexibility, or redesign tolerance.
| Candidate Part Number | Electrical Compatibility | Mechanical Compatibility | Performance Differences | Reliability and Qualification View | Package Availability | Cost Considerations | Suitable Application Scenarios | Advantages | Limitations |
|---|---|---|---|---|---|---|---|---|---|
| Nexperia PMN70XPE | Highest if datasheet, markings, and package match the original PMN70XPE PERIA requirement | Potentially closest, but SOT23-6 confirmation is required | Expected to be closest to original behavior if same electrical family | Lower redesign risk when validated as same or equivalent source | May depend on regional stock and authorized supply | Often preferred if requalification cost is higher than unit price difference | Existing PMN70XPE designs, maintenance builds, controlled replacements | Best candidate for direct replacement evaluation | Manufacturer identity and package suffix must be verified |
| Nexperia PMN70XP | High if suffix difference does not change electrical or mechanical fit | Must compare land pattern and pinout | Similar family behavior, but suffix may affect package or ordering | Moderate risk until datasheet suffix is confirmed | Usually easier to source if broader family stock exists | Can reduce sourcing pressure | Existing boards where same-family substitution is allowed | Strong same-family alternative | Not guaranteed drop-in without suffix validation |
| Vishay Si2301CDS | Good for low-voltage P-channel switching if ratings match | Often not SOT23-6; likely layout impact | Good conduction performance for compact rails | Good manufacturer documentation supports qualification | Broad distributor availability | Usually cost-effective in volume | Portable devices, battery load switches, low-voltage rails | Balanced electrical performance and availability | Mechanical mismatch may prevent direct replacement |
| Infineon IRLML6402TRPBF | Good when logic-level gate drive and current rating match | SOT-23 class package; verify against original footprint | Predictable switching and acceptable RDS(on) in many low-voltage designs | Mature device with strong documentation | Widely available through many supply channels | Pricing may vary by supply chain cycle | High-side DC load switching, adapter or battery rail control | Strong sourcing and qualification history | May not be the lowest-loss option |
| Alpha & Omega AO3401A | Good where higher VDS margin is needed | SOT-23 style package; likely not direct SOT23-6 replacement | Higher voltage margin may come with RDS(on) trade-off | Suitable for designs exposed to adapter or transient stress | Commonly available | Often competitive | Input rail switches, systems needing voltage headroom | Better voltage margin than many low-voltage optimized MOSFETs | Efficiency must be checked at load current |
| Diodes Incorporated DMG2305UX-7 | Strong where low RDS(on) is required at available gate drive | Package and pinout must be reviewed | Lower conduction loss can reduce temperature rise | Good for efficiency-sensitive rails if thermally validated | Good availability in reel packaging | May cost more than generic MOSFETs depending on stock | Battery-powered rails, compact power gating, current-sensitive switching | Efficient low-voltage switching | Mechanical mismatch and thermal layout still need review |
| onsemi FDN306P | Adequate for moderate current switching | SOT-23 class; verify PCB compatibility | Generally suitable for less demanding loads | Stable supply history and documentation | Broad sourcing options | Often reasonable for general-purpose use | General load switch replacement, low-to-moderate current designs | Conservative choice for moderate loads | May not match low-RDS(on) performance of newer alternatives |
For a near drop-in PMN70XPE PERIA replacement, start with Nexperia PMN70XPE and Nexperia
PMN70XP
, then verify package marking, SOT23-6 pinout, and datasheet limits. If PCB changes are acceptable, Vishay
PMN70XP
PERIA
PMN70XP NEXPERIA TSOP6
36500
Si2301CDS
, Infineon
Si2301CDS
VISHAY
Si2301CDS Vishay SOT-23
4260
IRLML6402TRPBF
, Alpha & Omega
IRLML6402TRPBF
Infineon / IR
MOSFET P-CH 20V 3.7A SOT-23
60000
AO3401A
, Diodes Incorporated
AO3401A
UMW
30V 4.1A 65MR@10V,4.2A 350MW 1.3
1940585
DMG2305UX-7
, and onsemi
DMG2305UX-7
Diodes Incorporated
MOSFET P-CH 20V 4.2A SOT23
67458
FDN306P
can be evaluated as electrical alternatives depending on whether the design prioritizes low RDS(on), voltage headroom, sourcing stability, or cost.
FDN306P
Fairchild Semiconductor
SMALL SIGNAL FIELD-EFFECT TRANSI
71400
Before release, confirm the candidate under the actual operating conditions: maximum VIN, load current, VGS drive level, switching duty cycle, ambient temperature, copper area, and any surge or inductive events. For replacement sourcing and quotations, obtain current availability and pricing through IC-Components.com or email Info@IC-Components.com.



