The Vishay Dale RN60E2872FRSL is a precision metal film through-hole resistor delivering 28.7 kOhms resistance with ±1% tolerance in a quarter-watt power rating. This axial-lead component from the RN60 series meets MIL-R-10509/1 military specification requirements, combining stable electrical performance with robust environmental protection for demanding circuit applications.
Built on metal film technology, this resistor maintains ±25ppm/°C temperature coefficient across its -65°C to 175°C operating range. The 0.25W power dissipation capacity suits moderate current applications where precise resistance values must remain stable under varying thermal conditions. The tight 1% tolerance supports applications requiring accurate voltage division, signal conditioning, and bias network configurations without additional component selection or trimming.
The axial package measures 0.145" diameter by 0.344" length (3.68mm x 8.74mm), providing standard footprint compatibility with through-hole PCB designs and point-to-point wiring assemblies. Two axial terminations simplify installation in both automated and manual assembly processes while ensuring reliable mechanical and electrical connections.
Flame retardant coating enhances safety compliance in applications where fire risk mitigation matters. The moisture-resistant construction protects internal resistance elements from humidity-induced drift and corrosion, extending operational life in non-hermetic environments. These features align with military-grade reliability requirements while remaining accessible for industrial and commercial designs seeking enhanced durability.
The 28.7 kOhm value falls within commonly specified ranges for feedback networks in operational amplifier circuits, timing applications with RC networks, and current-sensing configurations where moderate impedance levels balance signal integrity with power consumption. Metal film composition delivers low noise characteristics compared to carbon-based alternatives, making this component suitable for precision analog circuits, instrumentation amplifiers, and measurement equipment.
As part of the RN60 series, this resistor shares design heritage with components proven in aerospace, defense, and industrial control systems. The active product status and EAR99 export classification facilitate procurement for diverse applications while the component ships in tape and reel packaging for volume production requirements.
When sourcing components for military-grade or high-reliability applications, the need to identify functionally equivalent resistors arises from supply chain constraints, cost optimization requirements, or design adaptability considerations. The Vishay Dale RN60E2872FRSL represents a precision metal film resistor designed to MIL-R-10509/1 standards, featuring 28.7 kOhms resistance with ±1% tolerance and 0.25W power rating. Engineers seeking alternatives typically evaluate cross-compatible options from manufacturers such as Yageo, KOA Speer, Stackpole Electronics, and TE Connectivity, with candidates including
MFR-25FBF52-28K7
, MF1/4LCT52R287J, and
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
RNF14FTD28K7
. Understanding the technical boundaries and selection criteria ensures functional equivalence without compromising performance margins.
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
RN60E2872FRSL (1)
Original Part Characteristics and Application Context
The RN60E2872FRSL belongs to Vishay Dale's RN60 series, which adheres to MIL-R-10509/1 specifications for military and aerospace applications. The axial through-hole package measures 0.145" diameter by 0.344" length, providing mechanical stability for applications where surface-mount solutions prove unsuitable. The metal film construction delivers ±25ppm/°C temperature coefficient, maintaining resistance stability across the -65°C to 175°C operating range. Flame retardant coating and moisture-resistant encapsulation address environmental exposure requirements common in avionics, defense systems, and industrial instrumentation.
The 28.7 kOhms resistance value positions this component within typical feedback networks, voltage dividers, and biasing circuits where precision matters. The 1% tolerance ensures predictable circuit behavior without requiring manual selection or trimming. Power dissipation capability of 0.25W accommodates moderate current levels while maintaining thermal margins in properly ventilated enclosures.
Direct Cross-Reference Options from Established Manufacturers
Yageo MFR-25FBF52-28K7
The Yageo MFR-25 series provides a commercially available alternative with 28.7 kOhms resistance and ±1% tolerance. This metal film resistor shares the 0.25W power rating and operates within -55°C to 155°C temperature range. The axial configuration maintains dimensional compatibility with 0.146" diameter and 0.350" length, falling within typical PCB footprint tolerances.
Temperature coefficient specification of ±50ppm/°C represents the primary deviation from the RN60E2872FRSL. This doubled thermal drift may affect precision applications where temperature-induced resistance shifts alter circuit behavior. In voltage reference circuits or instrumentation amplifiers operating across wide temperature ranges, this difference translates to measurable output variation. For applications where ambient temperature remains controlled within ±10°C bands, the practical impact diminishes to sub-0.1% resistance change.
The MFR-25 series lacks explicit MIL-R-10509/1 qualification but meets moisture sensitivity level 1 requirements and provides flame retardant coating. This positions the component appropriately for commercial-grade designs or non-flight-critical military applications where full military screening proves unnecessary. Cost advantages typically range between 40-60% compared to MIL-qualified variants.
KOA Speer MF1/4LCT52R287J
KOA Speer's MF1/4 series targets industrial and telecommunications applications with 28.7 kOhms resistance and ±5% tolerance as standard offering, though ±1% variants exist under extended part numbering. The metal film construction provides ±100ppm/°C temperature coefficient in standard grades, with tighter ±50ppm/°C variants available through custom selection.
Physical dimensions of 0.150" diameter by 0.354" length maintain PCB compatibility while slightly exceeding the RN60E2872FRSL envelope. Lead spacing remains standard at 0.400" for both components, ensuring direct substitution without board modifications. Operating temperature range of -55°C to 155°C aligns with commercial specifications rather than extended military requirements.
The relaxed temperature coefficient and tolerance specifications position this alternative for applications where cost reduction outweighs precision requirements. Audio signal path resistors, pull-up/pull-down networks, and general-purpose voltage dividers tolerate the wider parameter bands without functional compromise. Precision measurement circuits or low-drift reference designs require careful thermal characterization before deployment.
Stackpole Electronics RNF14FTD28K7
Stackpole's RNF14 series approaches military-grade performance with ±1% tolerance and ±50ppm/°C temperature coefficient, matching the MFR-25 thermal stability while offering improved moisture resistance through hermetic coating processes. The 0.25W power rating and -55°C to 155°C operating range maintain functional parity with commercial alternatives.
Dimensional specifications of 0.146" diameter by 0.346" length provide tight physical matching to the RN60E2872FRSL footprint. The flame retardant epoxy coating meets UL94V-0 flammability standards, addressing safety requirements in consumer electronics and industrial equipment. Lead-free construction and RoHS compliance facilitate integration into modern manufacturing flows.
This component serves applications requiring better-than-commercial reliability without full military qualification costs. Telecommunications infrastructure, medical devices, and automotive systems benefit from the enhanced environmental resistance while maintaining reasonable procurement costs. Supply chain availability through multiple distribution channels reduces lead time risks compared to pure military-grade parts.
TE Connectivity H8028K7
TE Connectivity's H80 series provides military-qualified alternatives with explicit MIL-R-10509 compliance. The 28.7 kOhms resistance value appears as a standard offering with ±1% tolerance and ±25ppm/°C temperature coefficient, directly matching RN60E2872FRSL thermal specifications. Operating temperature extends to -65°C to 175°C, maintaining full military performance envelope.
Physical dimensions of 0.145" diameter by 0.343" length provide dimensional interchangeability within manufacturing tolerances. Moisture resistance qualification meets MIL-STD-202 Method 106 requirements, and flame retardant coating satisfies MIL-STD-1276 criteria. These qualifications enable deployment in flight-critical avionics and space-rated systems where traceability documentation proves mandatory.
Procurement considerations include longer lead times and higher unit costs, typically 150-200% premium over commercial equivalents. Supply chain planning requires early identification and qualification to avoid program delays. The component serves as the closest functional replacement when maintaining original specification margins proves necessary for system certification.
Selection Criteria Based on Application Requirements
Temperature Coefficient Impact Assessment
The temperature coefficient specification directly influences circuit accuracy under thermal cycling. A ±25ppm/°C resistor exhibits 0.0025% resistance change per degree Celsius, while ±50ppm/°C variants double this sensitivity. In a precision voltage divider operating across 50°C temperature swing, the tighter specification maintains 0.125% maximum deviation versus 0.25% for relaxed alternatives.
Analog-to-digital converter reference circuits, where voltage stability determines measurement accuracy, demonstrate sensitivity to thermal drift. A 12-bit ADC with 0.025% inherent linearity error sees measurable performance degradation with ±50ppm/°C resistors under temperature cycling. Conversely, digital logic pull-up resistors tolerate wider drift without functional impact, making commercial-grade alternatives viable.
Environmental Qualification Requirements
MIL-R-10509/1 qualification encompasses thermal shock testing, moisture resistance verification, and accelerated aging protocols beyond commercial component testing. Components lacking this qualification may exhibit increased failure rates in high-humidity or temperature-cycling environments. Avionics applications requiring DO-160 environmental compliance typically mandate military-qualified resistors for flight-critical circuits.
Industrial automation systems operating in controlled environments often specify commercial-grade components with enhanced moisture resistance coatings. The cost differential between military and commercial variants justifies thorough environmental stress screening during design validation rather than blanket military-grade specifications. Field failure data collection informs appropriate component grade selection for specific installation conditions.
Power Dissipation and Thermal Management
The 0.25W power rating assumes specific mounting conditions and ambient temperature limits. Operating at rated power in 70°C ambient environments requires adequate air circulation or heat sinking to maintain junction temperature below 155°C maximum rating. Derating curves recommend 50% power operation at 70°C ambient for extended reliability.
High-density PCB layouts with multiple heat-generating components necessitate thermal simulation to verify resistor temperature rise. Alternatives with identical power ratings but different thermal resistance characteristics may exhibit different operating temperatures under identical conditions. Infrared thermal imaging during prototype testing validates thermal margin adequacy before production commitment.
Comparison Summary of Alternative Components
The following technical comparison consolidates performance characteristics across identified alternatives:
Temperature Coefficient Performance:
- RN60E2872FRSL: ±25ppm/°C (baseline)
- TE Connectivity H8028K7: ±25ppm/°C (equivalent)
- Yageo
MFR-25FBF52-28K7: ±50ppm/°C (2x drift)
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
- Stackpole
RNF14FTD28K7: ±50ppm/°C (2x drift)
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
- KOA Speer MF1/4LCT52R287J: ±100ppm/°C (4x drift)
Operating Temperature Range:
- RN60E2872FRSL: -65°C to 175°C
- TE Connectivity H8028K7: -65°C to 175°C
- Yageo
MFR-25FBF52-28K7: -55°C to 155°C
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
- Stackpole
RNF14FTD28K7: -55°C to 155°C
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
- KOA Speer MF1/4LCT52R287J: -55°C to 155°C
Qualification Standards:
- RN60E2872FRSL: MIL-R-10509/1 qualified
- TE Connectivity H8028K7: MIL-R-10509 qualified
- Yageo
MFR-25FBF52-28K7: Commercial grade with flame retardant coating
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
- Stackpole
RNF14FTD28K7: Enhanced commercial with improved moisture resistance
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
- KOA Speer MF1/4LCT52R287J: Standard commercial grade
Physical Dimensions (Diameter x Length):
- RN60E2872FRSL: 0.145" x 0.344"
- TE Connectivity H8028K7: 0.145" x 0.343"
- Yageo
MFR-25FBF52-28K7: 0.146" x 0.350"
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
- Stackpole
RNF14FTD28K7: 0.146" x 0.346"
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
- KOA Speer MF1/4LCT52R287J: 0.150" x 0.354"
Typical Cost Positioning (Relative to RN60E2872FRSL Baseline):
- TE Connectivity H8028K7: 150-200%
- RN60E2872FRSL: 100% (reference)
- Stackpole
RNF14FTD28K7: 50-70%
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
- Yageo
MFR-25FBF52-28K7: 40-60%
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
- KOA Speer MF1/4LCT52R287J: 35-55%
Practical Validation Methods for Replacement Verification
Thermal Cycling Performance Evaluation Using Stackpole RNF14FTD28K7
When substituting the Stackpole
RNF14FTD28K7
into existing designs originally specifying RN60E2872FRSL, thermal characterization validates functional equivalence across the operating envelope. A representative test methodology involves installing the alternative component in the target circuit and subjecting the assembly to temperature chamber cycling between -40°C and 125°C with 30-minute soak periods.
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
Resistance measurement at temperature endpoints quantifies actual drift performance against datasheet specifications. The
RNF14FTD28K7
's ±50ppm/°C specification predicts maximum 8.25 ohm deviation across 165°C span for the 28.7 kOhms nominal value. Precision four-wire measurement using a calibrated digital multimeter with 0.01% accuracy captures these small resistance changes. Recording resistance values at thermal equilibrium eliminates transient self-heating effects that obscure true temperature coefficient behavior.
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
Circuit-level validation extends beyond isolated component testing. In precision voltage divider configurations, output voltage monitoring during thermal cycling reveals system-level drift. A 12-bit data acquisition system with 100µV resolution captures voltage changes corresponding to resistance drift. Comparing measured performance against original RN60E2872FRSL baseline data quantifies any accuracy degradation. Applications maintaining ±0.2% total error budget across temperature range may tolerate the
RNF14FTD28K7
's increased drift, while tighter specifications require components matching the original ±25ppm/°C characteristic.
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
Moisture Resistance Verification
Moisture absorption affects resistance stability in high-humidity environments, particularly for components lacking hermetic encapsulation. Accelerated testing following JESD22-A101 standard exposes components to 85°C/85% relative humidity conditions for 168 hours. Pre-exposure and post-exposure resistance measurements quantify moisture-induced drift beyond normal temperature coefficient effects.
Metal film resistors with proper moisture barrier coatings typically exhibit less than 0.1% resistance change after humidity exposure. Components showing greater than 0.2% drift indicate inadequate environmental protection for field deployment in uncontrolled environments. This testing proves especially relevant when substituting commercial-grade alternatives lacking explicit MIL-STD-202 qualification into designs originally using military-specified components.
Application-Specific Deployment Guidance
Precision Instrumentation Circuits
Measurement systems requiring long-term stability benefit from maintaining ±25ppm/°C temperature coefficient specifications. The TE Connectivity H8028K7 provides direct replacement capability without circuit recalibration. Alternatively, the increased drift of ±50ppm/°C variants necessitates either temperature compensation algorithms in microcontroller-based designs or tighter thermal management to restrict operating temperature variation.
Voltage reference circuits supplying analog-to-digital converters demonstrate sensitivity to resistor drift. A 10V reference with 28.7 kOhms/71.5 kOhms voltage divider producing 4.096V for a 16-bit ADC sees 0.4 LSB error per degree Celsius with ±25ppm/°C resistors. Doubling the temperature coefficient to ±50ppm/°C increases error to 0.8 LSB per degree, potentially exceeding measurement accuracy requirements in high-resolution systems.
Power Supply Feedback Networks
Switch-mode power supply feedback dividers tolerate wider resistor tolerances and temperature coefficients without affecting regulation performance. Voltage mode controllers with ±2% output tolerance specifications accommodate ±50ppm/°C resistors across normal operating temperature ranges. The Yageo
MFR-25FBF52-28K7
serves these applications effectively while reducing bill-of-material costs.
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
Current sensing applications where resistor temperature rise from power dissipation creates intentional drift require careful analysis. In these scenarios, the resistor's temperature coefficient becomes part of the sensing characteristic rather than an error source. Understanding the thermal coupling between the resistor and sensed circuit proves more significant than absolute temperature coefficient specification.
Signal Conditioning and Filtering
Active filter designs using operational amplifiers depend on resistor matching rather than absolute temperature coefficient. When multiple resistors experience identical temperature changes, ratiometric accuracy remains stable even with ±100ppm/°C components. The KOA Speer MF1/4LCT52R287J becomes viable in these configurations when all divider network resistors originate from the same manufacturing lot, maintaining thermal tracking characteristics.
Time constant circuits where RC networks determine frequency response exhibit sensitivity to resistor drift. Audio crossover networks and anti-aliasing filters shift corner frequencies proportional to resistance changes. Applications specifying ±5% frequency tolerance across temperature accept ±50ppm/°C resistors, while precision audio or data acquisition systems require tighter specifications.
Decision Framework for Optimal Alternative Selection
The selection process begins with environmental qualification requirements. Military, aerospace, or space applications necessitate MIL-qualified components like the TE Connectivity H8028K7 when traceability and qualification documentation support system certification. The cost premium and extended lead times represent acceptable tradeoffs for applications where component failure consequences extend beyond economic considerations.
Industrial and telecommunications systems operating in controlled environments benefit from enhanced commercial-grade options. The Stackpole
RNF14FTD28K7
provides improved moisture resistance and thermal stability compared to baseline commercial components while maintaining reasonable procurement costs. This middle-ground approach balances reliability requirements against budget constraints in high-volume production.
RNF14FTD28K7
Stackpole Electronics Inc
RES 28.7K OHM 1% 1/4W AXIAL
2000000
Cost-sensitive consumer electronics and non-precision applications leverage standard commercial components. The Yageo
MFR-25FBF52-28K7
delivers functional equivalence where temperature coefficient doubling remains within circuit error budgets. The substantial cost reduction enables margin improvement in competitive markets while maintaining adequate performance for intended applications.
MFR-25FBF52-28K7
YAGEO
RES 28.7K OHM 1% 1/4W AXIAL
12724
Temperature coefficient sensitivity analysis determines minimum acceptable specifications. Circuits exhibiting less than 0.5% total error budget across operating temperature range typically require ±25ppm/°C components. Applications tolerating 1% error accommodate ±50ppm/°C alternatives. General-purpose digital circuits and non-precision analog designs accept ±100ppm/°C components without functional compromise.
Physical interchangeability verification ensures mechanical compatibility. The 0.005" diameter variance across alternatives fits within standard PCB hole tolerances of ±0.005", and length differences of 0.010" maintain adequate creepage distances for rated voltages. Lead spacing remains constant at 0.400" across all alternatives, enabling direct substitution without board modifications.
Supply chain considerations influence component selection beyond pure technical parameters. Evaluating multiple qualified sources provides procurement flexibility and reduces supply disruption risks. Documenting approved alternatives during design phases enables rapid sourcing responses when primary components encounter availability constraints.




