The Vishay Dale CMF5510R700FKEK represents a precision metal film resistor engineered for demanding environments where accuracy and thermal stability must coexist with protective features. This through-hole component delivers 10.7 ohms resistance with ±1% tolerance and handles 0.5W continuous power dissipation in an axial package format measuring 2.29mm diameter by 6.10mm length.
Metal film construction provides the foundation for the component's ±100ppm/°C temperature coefficient, enabling resistance drift control across wide ambient ranges. The axial lead configuration with dual terminations supports both automated insertion and hand assembly workflows, while the physical dimensions accommodate standard PCB hole patterns used in power management circuits, sensor interfaces, and current limiting networks.
The CMF55 series distinguishes itself through a combination of environmental protection features integrated during manufacture. Flame retardant coating meets safety requirements for equipment that must operate near heat sources or in fire-sensitive installations. Moisture resistant treatment extends operational reliability in humid conditions, condensing environments, or outdoor enclosures where water vapor infiltration would otherwise accelerate corrosion or leakage paths. These characteristics align with industrial control, automotive auxiliary systems, and outdoor instrumentation where components face variable exposure without sealed housings.
Operating temperature span from -55°C to 175°C covers both cold-start conditions and continuous operation near heat-generating semiconductors. The half-watt power rating at these temperatures positions the resistor for low-to-moderate current applications: gate biasing networks, reference voltage dividers, LED current regulation, or signal conditioning chains where precision matters but dissipation remains modest. In circuits requiring exact current sensing or voltage division with minimal drift, the 1% tolerance reduces calibration overhead compared to 5% general-purpose alternatives.
The component ships in bulk packaging and maintains active production status with RoHS3 compliance, supporting long-term design availability. For engineers specifying through-hole metal film resistors in environments where moisture, temperature cycling, and safety standards intersect, the CMF5510R700FKEK provides a balance between precision performance and protective features without requiring external conformal coating or additional environmental sealing measures.
CMF5510R700FKEK (1)
Replacing Vishay Dale CMF5510R700FKEK: Why 10.7 Ohm 1/2W Axial Resistor Substitution Needs Care
When Vishay Dale CMF5510R700FKEK is unavailable, overallocated, or under cost review, a replacement cannot be selected by resistance value alone. This part is a 10.7 Ohm, ±1%, 0.5W axial metal film resistor with flame-retardant coating, moisture resistance, and a wide -55°C to 175°C operating range. A substitute must therefore be checked for resistance accuracy, power derating, temperature coefficient, body size, lead format, coating behavior, and long-term stability under the actual circuit conditions.
Common equivalent or alternative part numbers to evaluate include:
- Vishay Dale CMF5510R700FKEK
- Yageo
MFR-50FTE52-10R7
MFR-50FTE52-10R7
YAGEO
RES 10.7 OHM 1% 1/2W AXIAL
20000000
- Stackpole RNF12FTD10R7
- KOA Speer MF1/2CC10R7F
- TE Connectivity LR1F10R7
- Vishay BC Components
MRS25000C1079FCT00
MRS25000C1079FCT00
Vishay Beyschlag/Draloric/BC Components
RES 10.7 OHM 0.6W 1% AXIAL
2000000
These parts are not automatically interchangeable in every design. The best replacement depends on whether the resistor is used for current sensing, biasing, discharge, input protection, analog trimming, or general current limiting.
Vishay Dale CMF5510R700FKEK Specifications That Define Replacement Suitability
Vishay Dale CMF5510R700FKEK is part of the CMF series and uses a metal film element in an axial through-hole package. Its 10.7 Ohm value is an E96 precision resistance value, so replacing it with a nearby 10 Ohm or 11 Ohm resistor may shift current levels, gain, time constants, or protection thresholds.
Key engineering characteristics include:
| Parameter | Vishay Dale CMF5510R700FKEK |
|---|---|
| Manufacturer | Vishay Dale |
| Series | CMF |
| Resistance | 10.7 Ohms |
| Tolerance | ±1% |
| Power Rating | 0.5W, 1/2W |
| Technology | Metal film |
| Temperature Coefficient | ±100ppm/°C |
| Operating Temperature | -55°C to 175°C |
| Package | Axial through-hole |
| Body Size | 2.29mm diameter x 6.10mm length |
| Features | Flame-retardant coating, moisture resistant, safety construction |
| Compliance | RoHS3 compliant |
| Packaging | Bulk |
The 0.5W rating is one of the main filters when choosing an equivalent resistor. A 0.25W axial metal film resistor may match 10.7 Ohm and ±1%, but it may run hotter, derate earlier, or fail lifetime targets in the same circuit. The ±100ppm/°C temperature coefficient is suitable for many precision and industrial circuits, but a lower TCR alternative may improve stability in analog paths, while a higher TCR part may be less suitable in temperature-sensitive designs.
Typical applications include low-value precision biasing, current limiting, feedback networks, instrumentation circuits, industrial control boards, power supply auxiliary circuits, and safety-conscious through-hole assemblies. Because CMF5510R700FKEK includes flame-retardant and moisture-resistant features, replacements used in harsh, high-humidity, or elevated-temperature environments should be screened beyond basic resistance and wattage.
Candidate Replacement Parts for Vishay Dale CMF5510R700FKEK 10.7 Ohm 1/2W Resistor
The following table compares practical replacement candidates for Vishay Dale CMF5510R700FKEK. Each option should be verified against the latest manufacturer datasheet, especially for lead diameter, body dimensions, coating rating, voltage rating, and power derating curve.
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Vishay Dale | CMF5510R700FKEK | 10.7 Ohm, ±1%, 0.5W, axial metal film, ±100ppm/°C, -55°C to 175°C | Flame-retardant coating, moisture resistant, safety metal film construction | Precision through-hole circuits, industrial boards, control electronics, power supply support circuits | Direct original part; no redesign required when the same revision and packaging are acceptable | Availability, lead time, or pricing may drive second-source evaluation | Preferred option for existing qualified builds and no-change BOM maintenance |
| Yageo |
| 10.7 Ohm, ±1%, 0.5W class axial metal film, commonly ±100ppm/°C depending on series option | General-purpose precision metal film resistor with axial leads | Consumer electronics, industrial controls, power supplies, signal conditioning | Matches the main electrical requirements: resistance, tolerance, metal film technology, and 1/2W rating | Operating temperature range, coating classification, pulse behavior, and body dimensions may differ from Vishay CMF | Suitable for cost-sensitive or high-volume assemblies after thermal and fit validation |
| Stackpole | RNF12FTD10R7 | 10.7 Ohm, ±1%, 1/2W axial metal film, commonly available with precision tolerance options | Flame-retardant coating options, stable metal film construction | General precision circuits, control boards, instrumentation support circuits | Provides the same nominal resistance, tolerance, power class, and axial through-hole format | Exact temperature coefficient and environmental ratings must be matched by ordering code and datasheet | Good second-source candidate where 1/2W axial metal film performance is required |
| KOA Speer | MF1/2CC10R7F | 10.7 Ohm, ±1%, 1/2W metal film axial resistor | Metal film stability, through-hole mounting, precision resistance range | Industrial electronics, analog networks, current limiting, legacy through-hole designs | Electrical class is close to CMF5510R700FKEK for resistance, tolerance, wattage, and package style | Temperature range, coating performance, and physical dimensions may not be identical | Useful where KOA Speer is already approved in the AVL or where sourcing diversification is needed |
| TE Connectivity | LR1F10R7 | 10.7 Ohm, ±1%, approximately 0.6W axial metal film depending on mounting and derating conditions | Precision metal film resistor with higher nominal power class than many 1/2W devices | Industrial equipment, power supply control, measurement circuits, through-hole assemblies | Offers equal resistance and tolerance with a power rating that can exceed the original in some conditions | Body size and derating curve may differ; confirm board spacing and thermal rise | Suitable when additional power margin is preferred and mechanical fit is confirmed |
| Vishay BC Components |
| 10.7 Ohm, ±1%, axial professional metal film, typically 0.6W class depending on operating conditions | Low-noise metal film behavior, professional-grade axial resistor family | Precision analog circuits, instrumentation, industrial control, low-noise networks | Same resistance and tolerance with a professional metal film construction and axial format | May have different body length, voltage rating, coating system, and temperature coefficient option | Strong candidate for precision or low-noise applications after layout and derating review |
Engineering Comparison of Vishay Dale CMF5510R700FKEK Replacement Options
Selecting a CMF5510R700FKEK equivalent is a trade-off between electrical fit, mechanical interchangeability, environmental behavior, qualification effort, and procurement risk. The table below focuses on practical replacement decisions rather than only datasheet values.
| Comparison Factor | CMF5510R700FKEK | Yageo MFR-50FTE52-10R7 | Stackpole RNF12FTD10R7 | KOA Speer MF1/2CC10R7F | TE Connectivity LR1F10R7 | Vishay BC Components MRS25000C1079FCT00 |
|---|---|---|---|---|---|---|
| Electrical compatibility | Baseline 10.7 Ohm, ±1%, 0.5W metal film | Close electrical match for general 1/2W metal film use | Close match if selected with proper TCR and coating option | Close match for standard precision through-hole circuits | Matches resistance and tolerance; may provide higher power margin | Matches resistance and tolerance; often suitable for precision analog use |
| Mechanical compatibility | Axial body, 2.29mm x 6.10mm | Usually axial, but body and lead dimensions should be checked | Axial format; confirm lead spacing and forming process | Axial format; verify fit in dense layouts | May be physically larger depending on LR1 construction | May differ from CMF55 body length and diameter |
| Performance differences | Known CMF stability and safety coating | Good general-purpose substitute, but environmental behavior may differ | Good balance of availability and 1/2W metal film performance | Suitable for standard precision designs; qualification depends on exact grade | Better thermal margin may reduce resistor temperature in loaded circuits | Potentially attractive for low-noise or precision applications |
| Reliability considerations | Original qualified device for existing design | Requires review of derating and coating behavior | Requires confirmation of flame-retardant and moisture performance | Requires environmental and thermal validation | Higher power rating can improve margin if board space allows | Professional series may support stable long-term operation when properly derated |
| Package availability | Bulk original stock may vary | Often available in tape or bulk formats depending on suffix | Multiple packaging options may exist | Packaging depends on ordering code | Commonly supplied in through-hole formats | Usually available in professional axial packaging options |
| Cost considerations | May cost more during allocation or constrained supply | Often competitive for production builds | Typically competitive second-source option | Can be suitable for approved-vendor sourcing strategies | May cost more than standard 1/2W alternatives | May carry higher cost if selected for precision-grade performance |
| Best-fit applications | Existing Vishay Dale CMF55 qualified designs | General current limiting, biasing, cost-sensitive production | Industrial boards needing a practical 1/2W metal film replacement | Designs already using KOA Speer axial resistors | Circuits where thermal margin is more valuable than smallest body size | Precision, low-noise, or professional-grade analog circuits |
| Advantages | No redesign or requalification if same part is used | Good availability and cost-performance balance | Strong practical replacement profile | Useful approved-source diversification | Extra power headroom may improve operating margin | Precision-oriented Vishay-family alternative |
| Limitations | Availability and procurement constraints | Must verify temperature range and coating equivalence | Exact specifications depend on full ordering code | Mechanical and environmental details need checking | Mechanical size may be less convenient | Not always a drop-in mechanical match |
For a low-risk replacement, the first screening step is to keep 10.7 Ohm, ±1%, axial through-hole, and at least 0.5W power rating. The second step is to compare the derating curve at the actual board temperature, not just the nominal wattage at room temperature. The third step is mechanical validation: axial resistor body length, lead diameter, lead forming, and stand-off height can affect automated insertion, wave soldering, and creepage spacing.
If the circuit dissipates meaningful power in the resistor, TE Connectivity LR1F10R7 and Vishay BC Components
MRS25000C1079FCT00
may provide useful thermal or precision advantages, provided the larger or different body style fits the PCB. For cost-controlled general-purpose substitution, Yageo
MRS25000C1079FCT00
Vishay Beyschlag/Draloric/BC Components
RES 10.7 OHM 0.6W 1% AXIAL
2000000
MFR-50FTE52-10R7
and Stackpole RNF12FTD10R7 are practical candidates, but environmental ratings and coating behavior should be confirmed. KOA Speer MF1/2CC10R7F is a reasonable sourcing-diversification option when KOA Speer parts are already accepted in the design or supplier approval process.
MFR-50FTE52-10R7
YAGEO
RES 10.7 OHM 1% 1/2W AXIAL
20000000
For quotations and availability checks on Vishay Dale CMF5510R700FKEK or suitable replacement resistors, request pricing through IC-Components.com or contact Info@IC-Components.com.




