The LTC2377CMS-16#TRPBF from Analog Devices Inc. is a 16-bit successive approximation register (SAR) analog-to-digital converter designed for precision measurement applications requiring high resolution at moderate sampling speeds. Operating at 500 kSPS, this single-channel ADC combines low power consumption with a compact 16-MSOP surface mount package, making it suitable for space-constrained systems where power efficiency and board density are design considerations.
Built on SAR architecture, the LTC2377CMS-16#TRPBF processes one differential input through a sample-and-hold circuit followed by the ADC core in a 1:1 ratio configuration. The differential input topology provides inherent common-mode noise rejection, which can be advantageous in industrial environments or systems with ground potential differences. Data acquisition occurs through an SPI interface, enabling straightforward integration with microcontrollers and DSPs commonly used in embedded measurement systems. The external reference configuration allows designers to select a voltage reference matched to their application's stability and drift requirements, providing flexibility in achieving desired system-level accuracy over temperature and time.
The device operates from dual 2.375V to 2.625V supplies for both analog and digital sections, compatible with modern low-voltage digital logic families and minimizing interface complexity in battery-powered or energy-harvesting designs. With a 0°C to 70°C commercial temperature range, the LTC2377CMS-16#TRPBF addresses applications including portable instrumentation, data loggers, sensor interface modules, and multichannel acquisition systems where moderate environmental specifications are acceptable. The 16-MSOP package measures 3.00mm in width and uses a surface mount footprint that supports automated assembly processes.
This part ships in tape and reel packaging for volume production, with current inventory showing 867 pieces of new original stock. The device maintains an active product status from Analog Devices, carries RoHS3 compliance for lead-free manufacturing requirements, and holds Moisture Sensitivity Level 1 classification, eliminating floor life restrictions during assembly operations. The combination of 16-bit resolution, half-megasample throughput, and sub-3V operation positions the LTC2377CMS-16#TRPBF in applications where dynamic range and conversion speed are balanced against power budget and cost constraints, particularly in systems measuring slowly varying signals or performing sequential channel scanning where 500 kSPS aggregate throughput is sufficient.
LTC2377CMS-16#TRPBF (1)
Finding Reliable Replacements for Analog Devices LTC2377CMS-16#TRPBF When Supply, Lifecycle, or Design Constraints Change
The Analog Devices Inc. LTC2377CMS-16#TRPBF is a 16-bit, 500ksps SAR analog-to-digital converter used where moderate-speed precision conversion, low power, differential input operation, and SPI data output are required. Replacement searches usually begin when inventory is constrained, a wider temperature grade is needed, production packaging changes, or a redesign allows a functionally similar ADC from the same family or another manufacturer.
Potential equivalent and alternative part numbers for LTC2377CMS-16#TRPBF include:
| Replacement Part Number | Manufacturer | Replacement Type |
|---|---|---|
|
| Analog Devices Inc. | Same electrical device, different packaging option |
|
| Analog Devices Inc. | Same device family with wider operating temperature range |
|
| Analog Devices Inc. | Same SAR ADC family, lower sampling rate |
|
| Analog Devices Inc. | Same SAR ADC family, higher sampling rate |
|
| Analog Devices Inc. | Alternative 16-bit SAR ADC for PCB redesign |
|
| Analog Devices Inc. | Lower-speed 16-bit SAR ADC alternative for redesign |
| ADS8860IDGST | Texas Instruments | 16-bit precision SAR ADC alternative for redesign |
A suitable replacement is not selected by resolution alone. The decision depends on sampling rate margin, input structure, reference drive requirements, SPI timing, analog and digital supply rails, package footprint, temperature rating, and firmware compatibility. Same-family parts can reduce redesign effort, while cross-family alternatives may be useful when board changes are acceptable or when supply continuity is the primary concern.
What the Analog Devices LTC2377CMS-16#TRPBF 16-Bit SAR ADC Requires from a Replacement
The LTC2377CMS-16#TRPBF from Analog Devices Inc. is a 16-bit successive approximation register ADC with one differential analog input, a 500ksps maximum sampling rate, SPI-compatible serial output, and external reference operation. It is supplied from 2.375V to 2.625V analog and digital rails and is offered in a 16-MSOP surface-mount package.
| Attribute | LTC2377CMS-16#TRPBF Specification | Replacement Relevance |
|---|---|---|
| Resolution | 16-bit | Alternatives should preserve system noise floor, code width, and calibration assumptions |
| Sampling rate | 500ksps | Lower-speed parts may work only if the application has timing margin; higher-speed parts may require layout and SPI timing review |
| Architecture | SAR ADC | Supports low-latency conversion compared with pipeline ADCs; replacement should match timing behavior where control loops are involved |
| Input type | Differential | Input driver, common-mode range, and anti-alias filter design must be checked before substitution |
| Number of inputs | 1 | Multiplexed systems may need external mux timing validation |
| Interface | SPI serial data | Firmware compatibility depends on clock polarity, frame length, conversion start timing, and data-valid timing |
| Reference type | External | Reference voltage accuracy, drive strength, settling, and noise directly affect conversion accuracy |
| Analog supply | 2.375V to 2.625V | Alternatives using 3V or 5V supplies may require power-tree changes |
| Digital supply | 2.375V to 2.625V | Logic-level compatibility with MCU, FPGA, or DSP must be confirmed |
| Package | 16-MSOP / 16-TFSOP, surface mount | Same-package options reduce PCB changes; smaller MSOP/VSSOP alternatives generally require layout modification |
| Temperature range | 0°C to 70°C | Industrial applications may need an “I” grade equivalent such as
|
The main product value of the LTC2377CMS-16#TRPBF is its combination of 16-bit resolution, 500ksps throughput, differential acquisition, SAR latency behavior, and compact 16-MSOP packaging. It is commonly used in precision data acquisition modules, industrial measurement interfaces, battery-powered instrumentation, control-loop monitoring, isolated measurement channels, and compact test equipment.
For replacement selection, the differential input and external reference architecture deserve close review. A part with the same bit depth and sample rate can still behave differently if the input sampling capacitor, acquisition time, reference current transients, or digital timing differ. When the ADC is used near its dynamic performance limits, the analog front-end amplifier, RC filter, reference buffer, and PCB grounding should be evaluated together with the candidate ADC.
Candidate Equivalent and Alternative ADCs for LTC2377CMS-16#TRPBF Replacement Evaluation
| Manufacturer | Part Number | Key Specifications | Product Features | Typical Applications | Why It Can Replace the Original Part | Main Differences or Limitations | Recommended Usage |
|---|---|---|---|---|---|---|---|
| Analog Devices Inc. |
| 16-bit SAR ADC, 500ksps, differential input, SPI interface, external reference, 2.5V-class supplies, 16-MSOP | Same base product LTC2377, commercial temperature grade, lead-free package | Precision data acquisition, instrumentation, control monitoring | It is the same functional ADC as LTC2377CMS-16#TRPBF, with the primary difference being ordering and packaging format | Confirm packaging quantity and logistics format; electrical design impact is normally minimal | Best choice when the schematic and PCB must remain unchanged and tape-and-reel packaging is not mandatory |
| Analog Devices Inc. |
| 16-bit SAR ADC, 500ksps, differential input, SPI, external reference, 16-MSOP, industrial temperature grade | Same LTC2377-16 architecture with wider temperature rating | Industrial control, field instruments, temperature-variable environments | Maintains the same conversion architecture, speed class, package family, and interface while improving temperature coverage | May have different pricing or availability than the commercial-grade part | Preferred drop-in style option when the design needs broader operating temperature margin |
| Analog Devices Inc. |
| 16-bit SAR ADC, 250ksps class, differential input, SPI, external reference, 16-MSOP | Lower-throughput member of the same precision SAR ADC family | Slow precision measurement, sensor monitoring, low-power acquisition | Can replace LTC2377CMS-16#TRPBF in systems where the required sample rate is below 250ksps and timing has margin | Throughput is lower; firmware timing and acquisition scheduling must be checked | Suitable when sampling bandwidth is modest and lower speed is acceptable |
| Analog Devices Inc. |
| 16-bit SAR ADC, 1Msps class, differential input, SPI, external reference, 16-MSOP | Higher-throughput member of the same SAR ADC family | Faster data acquisition, waveform capture, control systems needing more timing margin | Offers the same resolution class with higher maximum sampling rate, making it useful when 500ksps is a bottleneck | Higher speed may increase interface timing demands and reference/input driver settling requirements | Good option when more sampling headroom is useful and the analog front end can support faster conversion |
| Analog Devices Inc. |
| 16-bit SAR ADC, up to 1Msps class, serial interface, external reference, MSOP package | PulSAR ADC architecture, compact package, widely used precision converter | Portable instrumentation, multiplexed data acquisition, precision control | Provides similar 16-bit SAR conversion capability and higher speed potential | Not a direct pin-for-pin replacement; package, input structure, timing, and supply arrangement require redesign verification | Consider when redesign is allowed and a compact 16-bit SAR ADC is needed |
| Analog Devices Inc. |
| 16-bit SAR ADC, 250ksps class, serial interface, external reference, MSOP package | Low-power precision SAR ADC with moderate throughput | Sensor interfaces, battery-powered measurement, industrial monitoring | Can cover applications where 500ksps is not fully required and power or availability drives the choice | Lower sampling rate and different pinout/interface timing; not a direct board-level substitute | Useful for cost, power, or availability-driven redesigns with lower bandwidth requirements |
| Texas Instruments | ADS8860IDGST | 16-bit SAR ADC, up to 1Msps class, serial interface, precision ADC in VSSOP-style package | High-speed precision SAR ADC alternative from another manufacturer | Data acquisition, motor control feedback, industrial measurement | Matches the general requirement for a 16-bit SAR ADC with high sampling capability | Requires PCB, firmware, reference, and analog-input validation; not pin-compatible with LTC2377CMS-16#TRPBF | Use when multi-source strategy or redesign flexibility supports a non-ADI alternative |
The closest replacements are
LTC2377CMS-16#PBF
and
LTC2377CMS-16#PBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
6603
LTC2377IMS-16#TRPBF
because they preserve the original LTC2377-16 architecture and reduce changes to firmware, timing, layout, and analog signal conditioning. The
LTC2377IMS-16#TRPBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
3446
LTC2376CMS-16#TRPBF
and
LTC2376CMS-16#TRPBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
7307
LTC2378CMS-16#TRPBF
are better treated as same-family performance adjustments: one trades sampling rate downward, while the other provides higher throughput if the surrounding circuit can support it.
LTC2378CMS-16#TRPBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
4600
The
AD7980BRMZ
,
AD7980BRMZ
Analog Devices Inc.
IC ADC 16BIT SAR 10MSOP
15000
AD7685BRMZ
, and ADS8860IDGST should be considered redesign alternatives rather than drop-in equivalents. They can solve procurement or platform standardization issues, but they require validation of pinout, SPI timing, input drive, reference behavior, and conversion control sequencing.
AD7685BRMZ
Analog Devices Inc.
IC ADC 16BIT SAR 10MSOP
14961
Engineering Trade-Off Comparison for LTC2377CMS-16#TRPBF Replacement Options
| Evaluation Factor | LTC2377CMS-16#PBF | LTC2377IMS-16#TRPBF | LTC2376CMS-16#TRPBF | LTC2378CMS-16#TRPBF | AD7980BRMZ | AD7685BRMZ | ADS8860IDGST |
|---|---|---|---|---|---|---|---|
| Electrical compatibility | Closest match to original LTC2377CMS-16#TRPBF | Closest match with wider temperature grade | Similar family behavior but lower throughput | Similar family behavior with higher throughput | Similar 16-bit SAR function, different electrical implementation | Similar 16-bit SAR function at lower speed | Similar 16-bit SAR class from TI, different implementation |
| Mechanical compatibility | Same 16-MSOP package family | Same 16-MSOP package family | Likely same family package option; verify pinout before release | Likely same family package option; verify pinout before release | Requires PCB layout review | Requires PCB layout review | Requires PCB layout review |
| Sampling-rate impact | Maintains 500ksps capability | Maintains 500ksps capability | Reduces maximum sampling rate to 250ksps class | Increases maximum sampling rate to 1Msps class | Up to 1Msps class, depending on design conditions | 250ksps class | Up to 1Msps class |
| Firmware and SPI impact | Minimal if ordering format is the only change | Minimal; still verify timing against datasheet | Conversion timing may need adjustment for lower rate | SPI timing margin may need review at higher throughput | Requires driver-level timing validation | Requires driver-level timing validation | Requires driver-level timing validation |
| Analog front-end impact | Usually unchanged | Usually unchanged | May allow easier settling due to lower sample rate | Input driver and RC filter must support faster acquisition | Input range, sampling behavior, and driver stability must be checked | Lower speed may reduce driver stress | Input drive and reference transient behavior must be validated |
| Reference design impact | Same reference assumptions as original | Same reference assumptions as original | Similar family reference behavior expected | Faster conversion may demand stronger reference settling | Reference buffer and decoupling need redesign review | Reference design must be checked for the selected throughput | Reference requirements differ from LTC2377 family |
| Reliability and environment | Commercial temperature operation | Better fit for wider temperature operating conditions | Commercial grade; lower speed may reduce dynamic stress | Commercial grade; faster timing may narrow margins | Depends on selected grade and board design | Depends on selected grade and operating profile | Depends on selected grade and supplier qualification |
| Package availability | Good option if non-reel supply is acceptable | Good for production using tape and reel with industrial grade | Availability depends on same-family inventory | Availability depends on same-family inventory | Often useful in redesign-driven sourcing | Useful where lower-speed ADC stock is easier to secure | Supports second-source strategy at architecture level, not pin level |
| Cost considerations | Usually procurement-driven rather than redesign-driven | May cost more than commercial grade | May be attractive if lower speed is acceptable | May cost more for higher throughput | Redesign cost must be included | May reduce device cost in low-speed systems | Redesign and qualification cost must be included |
| Advantages | Same device behavior with minimal design risk | Drop-in style path with temperature margin | Same-family lower-speed option | Same-family higher-speed option | Compact, high-speed 16-bit SAR alternative | Lower-speed, low-power redesign option | Manufacturer diversification and high-speed capability |
| Limitations | Packaging format may not match automated assembly preference | Availability and price may vary | Not suitable if the system truly needs 500ksps | Requires stronger timing and analog settling review | Not pin-compatible | Not suitable for 500ksps requirements | Not pin-compatible; full validation required |
| Suitable application scenario | Existing LTC2377CMS-16#TRPBF designs needing equivalent electrical behavior | Existing designs used across broader temperature conditions | Precision sensor systems with lower bandwidth | Systems needing additional sampling headroom | New board spins needing a compact 16-bit SAR ADC | Redesigns where 250ksps is sufficient | Redesigns requiring alternate manufacturer sourcing |
For the lowest engineering change path,
LTC2377CMS-16#PBF
and
LTC2377CMS-16#PBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
6603
LTC2377IMS-16#TRPBF
should be evaluated first. They maintain the LTC2377-16 conversion behavior and are most appropriate when the existing PCB, firmware, reference circuit, and analog front end are already qualified.
LTC2377IMS-16#TRPBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
3446
If the application does not use the full 500ksps sampling capability,
LTC2376CMS-16#TRPBF
can be a practical same-family alternative. If higher throughput is desirable,
LTC2376CMS-16#TRPBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
7307
LTC2378CMS-16#TRPBF
provides more speed, but the input amplifier, anti-alias filter, reference buffer, SPI clocking, and timing margins should be reviewed before substitution.
LTC2378CMS-16#TRPBF
Analog Devices Inc.
IC ADC 16BIT SAR 16MSOP
4600
AD7980BRMZ
,
AD7980BRMZ
Analog Devices Inc.
IC ADC 16BIT SAR 10MSOP
15000
AD7685BRMZ
, and ADS8860IDGST are better suited to redesign projects or multi-source planning. They can satisfy the broader requirement for a 16-bit SAR ADC replacement, but they should not be treated as direct equivalents to Analog Devices LTC2377CMS-16#TRPBF without schematic, layout, firmware, and system-level accuracy validation.
AD7685BRMZ
Analog Devices Inc.
IC ADC 16BIT SAR 10MSOP
14961
For quotations and availability of LTC2377CMS-16#TRPBF replacement parts, suitable equivalents, or alternative ADC options, obtain pricing through the professional electronic components website IC-Components.com or email Info@IC-Components.com.




