- Can Glenair 806-013-MT16-2SBCE be used on a 28 VDC aerospace power connection?
- Glenair 806-013-MT16-2SBCE can be considered for a low-voltage DC connection when the current through each contact remains within the 5 A rating and the selected crimp contacts, wire size, insulation, and temperature conditions are compatible. The 28 VDC value alone does not establish suitability; designers should also evaluate contact derating, inrush current, fault current, creepage, clearance, and the required dielectric withstand voltage.
- What wire size and crimp contact should be selected for Glenair 806-013-MT16-2SBCE?
- Glenair 806-013-MT16-2SBCE uses crimp termination, so the contact part number and permitted wire range must be confirmed from the applicable Glenair Mighty Mouse 806 contact and assembly documentation. Select the wire and contact combination for the continuous current, insulation diameter, temperature rating, and crimp tooling being used. The 5 A connector rating should not be treated as approval for every wire gauge or contact configuration.
- Is Glenair 806-013-MT16-2SBCE suitable for a shielded cable or high-speed signal?
- Glenair 806-013-MT16-2SBCE is specified as unshielded, so it may be unsuitable where cable shielding, controlled impedance, low electromagnetic emissions, or strong noise immunity is required. A shielded backshell or a different connector variant may be needed, but the complete cable assembly must be evaluated because shielding performance depends on the backshell, termination method, bonding, cable construction, and enclosure grounding.
- How should the panel and mounting hardware be designed for Glenair 806-013-MT16-2SBCE?
- Glenair 806-013-MT16-2SBCE has a flange-style panel-mount configuration, so the panel cutout, flange dimensions, fastener pattern, rear clearance, and connector orientation should be taken from the manufacturer’s mechanical drawing. The mounting structure should withstand cable pull, vibration, and repeated mating loads without transferring excessive stress to the connector shell or crimp contacts. A panel gasket or separate sealing feature may be required if the enclosure must maintain a defined environmental rating.
- Does Glenair 806-013-MT16-2SBCE provide a fully sealed IP-rated connection?
- Glenair 806-013-MT16-2SBCE is described as environment resistant, but that description does not by itself establish a complete IP rating for the installed interface. The final environmental performance depends on the mated connector, backshell, cable seal, panel interface, unused-contact protection, and assembly procedure. Use the manufacturer’s qualification data and the exact mating components when designing for water, dust, pressure washing, salt spray, or condensation.
- Can Glenair 806-013-MT16-2SBCE operate continuously at 200°C?
- Glenair 806-013-MT16-2SBCE has a stated operating range of -65°C to 200°C, but operation near 200°C requires system-level derating. Contact current capability, wire insulation, crimp stability, plating behavior, seal materials, backshell components, adjacent equipment, and thermal cycling should all be reviewed. Continuous high-temperature operation may require a lower current than the nominal 5 A rating.
- Is Glenair 806-013-MT16-2SBCE appropriate for high-vibration or aircraft-installed equipment?
- Glenair 806-013-MT16-2SBCE is part of the Mighty Mouse 806 series and is associated with aerospace applications, making it a candidate for compact aircraft wiring where the complete configuration meets the required qualification. The installation still needs suitable strain relief, backshell support, locking engagement, cable routing, and contact retention. Qualification should be confirmed for the exact mating connector, contact system, and environmental profile rather than inferred from the series name alone.
- What should be checked before using Glenair 806-013-MT16-2SBCE as a replacement connector?
- Before replacing another connector with Glenair 806-013-MT16-2SBCE, compare the shell size, insert arrangement, contact gender, mating interface, keying or orientation, panel cutout, flange geometry, rear clearance, contact system, wire range, current rating, sealing method, and qualification requirements. A two-position connector is not automatically a functional or mechanical replacement for another two-position part. The existing harness may require new contacts, crimp tooling, backshell hardware, or a revised panel design.
- Can Glenair 806-013-MT16-2SBCE replace an Amphenol D38999 or Souriau 8D connector?
- Glenair 806-013-MT16-2SBCE should not be treated as a direct drop-in replacement for an Amphenol D38999 or Souriau 8D connector. Those families can differ in shell geometry, insert layouts, coupling systems, keying, contact sizes, sealing performance, shielding options, qualification standards, and accessory compatibility. A migration may be practical when the harness and panel are redesigned, but the exact mating pair and environmental qualification must be revalidated.
- Are other Glenair Mighty Mouse 806 part numbers interchangeable with Glenair 806-013-MT16-2SBCE?
- Other Glenair Mighty Mouse 806 part numbers may share portions of the product family but are not necessarily interchangeable with Glenair 806-013-MT16-2SBCE. Differences in shell style, mounting method, insert arrangement, contact gender, orientation, keying, plating, backshell compatibility, and sealing options can prevent mating or alter installation requirements. The complete Glenair part number and the corresponding mating connector should be checked before ordering a substitute.
- Does Glenair 806-013-MT16-2SBCE support two separate 5 A circuits?
- Glenair 806-013-MT16-2SBCE has two positions and a stated 5 A current rating, but the allowable circuit arrangement depends on the contact rating conditions and applicable derating curves. Designers should verify whether the rating applies per contact, assess ambient and bundle temperature, account for simultaneous loading, and confirm that the selected wire and crimp contacts meet the required voltage and fault-current conditions.
- Is Glenair 806-013-MT16-2SBCE suitable for a low-level sensor or thermocouple connection?
- Glenair 806-013-MT16-2SBCE may be usable for low-level sensor wiring when the contact materials, gold mating finish, cable construction, grounding scheme, and environmental conditions support the signal requirements. Its unshielded configuration can increase susceptibility to electromagnetic interference, and the connector does not by itself provide temperature-compensated thermocouple junctions or controlled impedance. A shielded or specialized instrumentation connector may be preferable for microvolt signals, high-impedance sensors, or electrically noisy installations.
- What maintenance checks are recommended for Glenair 806-013-MT16-2SBCE in long-term service?
- For Glenair 806-013-MT16-2SBCE, maintenance inspections should include full threaded engagement, shell or flange damage, backshell strain relief, cable jacket movement, contamination, corrosion, contact retention, and evidence of moisture ingress. Mating cycles should be managed according to the connector and contact qualification data. Damaged contacts or seals should be replaced with approved parts and tooling rather than reworked with generic crimp components.
- Is Glenair 806-013-MT16-2SBCE compliant with RoHS requirements?
- Glenair 806-013-MT16-2SBCE is listed with RoHS status as not applicable, so it should not be assumed to meet a project-specific RoHS declaration. Procurement teams should request the manufacturer’s current compliance statement and compare it with the regulatory requirements for the destination market, system, and end application. REACH-unaffected status does not substitute for a RoHS assessment.
- What mating connector and accessories are required for Glenair 806-013-MT16-2SBCE?
- Glenair 806-013-MT16-2SBCE requires a compatible mating connector with the corresponding shell, insert, contact arrangement, orientation, and coupling interface. The installation may also require the correct crimp contacts, backshell, cable clamp or strain relief, seals, dust cap, mounting hardware, and qualified crimp tooling. These items should be selected from the applicable Glenair 806 documentation because generic accessories may not provide mechanical fit or environmental performance.